Mid-USA

Rear Drive Belt Gates 139T 1-1/8"Wide For Wide Tire & Custom Use Pc-139-118

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
139 teeth, 1 ¹/₈ wide
or custom wide tire use

Drive Belt,Rear Poly Belt 135T Flt 85/96 Fxr 85/L W/70T Rear And Large Fr Pulley Pc-135

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
135 teeth, 1 ¹/₂ wide
Fits FLT 1986/1996 & FXR 1985/Later (extra short)

Drive Belt,Rear Poly Belt 133T All Dyna Models 91/99 W/70T Rr Replaces Hd 40015-90 Pc-133

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
133 teeth, 1 ¹/₂ wide
Fits Dyna 1991/1999
Replaces HD# 40015-90

Drive Belt,Rear Poly Belt 130T Softail 95/99 W 65 T Rr Pulley Rpls Hd 40017-94 Pc-130

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
130 teeth, 1 ¹/₂ wide
Fits Softail 1995/1999 with 65T rear pulley
Replaces HD# 40017-94

Drive Belt,Rear Poly Belt 128T Spt 91/03 128 Tooth X 1-1/8" Rpls Hd 40022-91 Pc-128-118

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
128 teeth, 1 ¹/₈ wide
Fits Sportster 1991/2003 with 61T pulley & for wide tire custom use
Replaces HD# 40022-91

Drive Belt,Rear Poly Belt 127T Bt 4 Spd 1980/Later Extra Lg 127 Tooth Pc-127

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
127 teeth, 1 ¹/₂ wide
Fits Big Twin 4 speed models (extra long)

Drive Belt,Rear Poly Belt 126T Bt 4 Spd 1980/Later 126 Tooth Rpls Hd 40003-79 Pc-126

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
126 teeth, 1 ¹/₂ wide
Fits Big Twin 4 speed models 1980/Later
Replaces HD# 40003-79

Drive Belt,Rear Poly Belt 125T Spt 91/03 125 Tooth X 1-1/8" Rpls Hd 40038-91 Pc-125-118

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
125 teeth, 1 ¹/₈ wide
Fits Sportster 1991/2003 with 55T pulley & for custom wide tire use
Replaces HD# 40038-91

Drive Belt,Rear Poly Belt 125T 125 Tooth For Special Pulley Combo & Custom Frames Pc-125

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
125 teeth, 1 ¹/₂ wide
Short length for special pulley combinations for Big Twin

Drive Belt,Rear Poly Belt 128T All St Models 1993 W/61T Rr Gates Rpls Hd 40012-90 Pc-128

• Gates brand (polychaing) are the same belts used by the Motor Company since 1980 because of their reliability
• The teeth have a very slick surface that is easy on the pulleys
• The outer perimeter is ribbed to help improve flexibility and cannot be used with a belt tensioning roller

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Gates
128 teeth, 1 ¹/₂ wide
Fits Softail 1993/1999 with 61T rear pulley
Replaces HD# 40012-90

Drive Belt,Rear Panther 132T All Softail W/70T Rr Pulley Rpls Hd 40023-86 Pa-132-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
132 teeth, 1 ¹/₂ wide
Fits Softail 1986/1999 with 70T rear pulley
Replaces HD# 40023-86

Drive Belt,Rear Panther 135T Flt 85/96 Fxr 85/L W/70T Rear And Large Fr Pulley Pa-135-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
135 teeth, 1 ¹/₂ wide
Fits FLT 1985/1996 & FXR 1985/Later (extra short)

Drive Belt,Rear Panther 127T Bt 4 Spd 1980/L 127T Extra Lg Self Lubing Pa-127-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
127 teeth, 1 ¹/₂ wide
Fits Big Twin 4 speed models (extra long)

Drive Belt,Rear Panther 126T Bt 4 Speed 1980/Later Rpls Hd 40003-79 Pa-126-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
126 teeth, 1 ¹/₂ wide
Fits Big Twin 4 speed models 1980/Later
Replaces HD# 40003-79

Drive Belt,Rear Panther 130T Softail 95/99 W 65 T Rr Pulley Rpls Hd 40017-94 Pa-130-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
130 teeth, 1 ¹/₂ wide
Fits Softail 1995/1999 with 65T rear pulley
Replaces HD# 40017-94

Drive Belt,Rear Panther 128T Softail W/61T Pulley 128 Tooth Rpls Hd 40012-90 Pa-128-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
128 teeth, 1 ¹/₂ wide
Fits Softail 1993/1999 with 61T rear pulley
Replaces HD# 40012-90

Drive Belt,Rear Panther 125T Spt 91/03 125 Tooth X 1-1/8" Rpls Hd 40038-91 Pa-125-118-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
125 teeth, 1 ¹/₈ wide
Fits Sportster 1991/2003 with 55T pulley & for custom wide tire use
Replaces HD# 40038-91

Drive Belt,Rear Panther 125T 125 Tooth For Special Pulley Combo/Custom Frames Pa-125-U

• Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
• The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
• A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
125 teeth, 1 ¹/₂ wide
Short length for special pulley combinations on Big Twin

Drive Belt,Primary 8Mm 1-1/2" Bt 4 Spd W/Rr Chain & 45/68 T Combo Enclosed Pri Fits#77028
Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stressproof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized. Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required. Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
Replacement 1 ¹/₂ wide Kevlar Reinforced Belt
Fits 45-68 tooth combination - 138 teeth
Fits Big Twin 4 speed 1965/1984 with electric start

Drive Belt,Primary 8Mm 141T Bt L85/L* 5 Spd 141T 1-3/4" Belt.......Bdl-141
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Late 1985/Later 5 speed, electric start. 1 3/4 wide. Pulley teeth combo 47 & 72. 141 belt teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 132T Bt L85/L* 5 Spd 132T 1-3/4" Belt......Bdl-132
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Late 1985/Later 5 speed, electric start. 1 3/4 wide. Pulley teeth combo 48 & 72. 132 Belt Teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 11Mm 92T Big Twin 5 Spd 1-1/2"Wide 92T Open/Closed Primary...Bdl-5S11
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 11mm Replacement part. 1980/1984 5 speed closed primary new style belt drive. 1 1/2 wide. Pulley teeth combo 31 & 47. 92 belt teeth. Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 11Mm 96T Bt 37/84 Old Style 1-1/2" 96T Op&Cl Pri,K&E Start....30884
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Replacement part. 11 mm. 1937/1984 open or closed primary kick or electric start old style belt drive. 1 1/2 wide. Pulley teeth combo 29 & 44, 28 & 44. 96 belt teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 144T Big Twin 37/L 3"Wide Belt 144T Open Primary......Mfg 37144-3
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Belt Drives Ltd.
8mm Replacement part for BRUTE I. 1937/1984 4 speed with open primary kickstart. 3 wide. Pulley teeth combo 47 & 76. 144 belt teeth. Fits 77000 & 77033.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 144T Big Twin 37/L 2"Wide Belt 144T Open Primary.......Mfg 37144-2
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 8mm Replacement part. 1937/1984 4 speed with open primary kickstart. 2 wide. Pulley teeth combo 47 & 76. 144 belt teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 144T Bt 37/84 1-1/2" Wide 144T Open Primary Only...Mfg 37144-1-1/2
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 1937/1984 4 speed with open primary kickstart. 1 1/2 wide. Pulley teeth combo 47 & 76. Belt teeth 144.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 132T Bt 37/L*(Ex 65/78 Es) 1-1/2" Wide 132T Closed Pri...30853Be
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 8mm Replacement part. 1937/1964 with open or closed primary and 1979/1984 4 speed with die cast inner primary, kick or electric start. (Bullseye belt +.020 longer than 77501). 1 1/2 wide. Pulley teeth combo 41 & 61, 39 & 62, 40 & 62.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Main shaft bearing C-Clip Fits All BDL Motor plates, Mfg.CC-193

Belt Drives Ltd.
Replacement Main shaft Support Bearing C-Clip
Fits Softail 1990/2006

Pulley Spacer .937" Tk W/Bolts Bt 73/99 Spt 79/99 Machined Billet Aluminum
Now you can install a 180 series tire on a 5 1/2 wide wheel on your standard width frame. Order the pulley style and size of your choice then order the belt to match your model and rear pulley combination. Next order the custom 15/16 wide rear pulley spacer and bolt kit if using a stock width belt drive hub. Wider rear fender must be used and the section of frame behind the shock must be widened on FXR and DYNA models.These 1 wide polished pulleys are made in a permanent mold from 356-T6 aircraft quality aluminum and feature gear cut teeth to RMA standards for an excellent belt wrap. Includes a chrome plated inner flange that is staked on.
Note: 1 wide pulley belts are designed for custom show only. They are not intended to be used in lieu of an 1 1/2 wide pulley and belt. Use of a 1 wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd. or MID-USA.This machined aluminum Rear Pulley Spacer is .937 thick, includes chrome plated Countersunk mounting bolts and is designed to be used on models with 1986/1999 belt drive rear hubs and 1 wide rear pulleys.Note: 1 wide pulley belts are designed for custom show only. They are not intended to be used in lieu of an 1 1/2 wide pulley and belt. Use of a 1 wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd. or MID-USA. These 1 wide polished pulleys are made in a permanent mold for 356 T6 Aircraft quality aluminum and feature gear cut teeth to RMA standards for an excellent belt wrap. Includes a chrome plated inner flange that is staked on.

Pulley,Trn Hard Anodized 29T Bt 5 Spd 85/05,7075 Alum W/Nut Lockplate,Seal,Spacer Tp-29
Note: These pulleys retro fit the 1985/Early 1994 pulleys that only had a ⁷/₁₆ wide spline and were notorious for working loose.

• Lighter that stock pulley
• Made in a permanent mold with 356 T6 aircraft quality aluminum
• Hard anodized teeth for longer pulley and belt life
• Made with a ³/₄ wide spline and correct length spacerBelt Drives Ltd
  29 tooth aluminum pulley
  Fits Big Twin 1985/2005

Note: These pulleys retro fit the 1985/Early 1994 pulleys that only had a ⁷/₁₆ wide spline and were notorious for working loose.

• Lighter that stock pulley
• Made in a permanent mold with 356 T6 aircraft quality aluminum
• Hard anodized teeth for longer pulley and belt life
• Made with a ³/₄ wide spline and correct length spacer Belt Drives Ltd
  32 tooth aluminum pulley
  Fits Big Twin 1985/2005
  Replaces HD# 40250-94

Mshf Housing Bearing,Pri Cvr Fl Fx 4 Spd 65/L St E 84 Rpls Hd 9040 Or 9037 Or 9061
V-FACTOR
Sealed Housing Bearing
Fits L, X 1965/Later, Softail Early 1984
Replaces HD# 9040, 9037, 9061
(Imported)