Mid-USA

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-1/2"Offset,Mtg Hrdw In-1500
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Steel Replacement 1 1/2 offset insert and mounting hardware.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-1/4"Offset,Mtg Hrdw In-1250
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Steel replacement 1 1/4 offset insert and mounting hardware.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1"Offset & Mtg Hrdw In-1000
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-3/4"Offset,Mtg Hrdw .In-1750
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Replacement part. 1 3/4 offset insert and mounting hardware.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 3/4"Offset & Mtg Hrdw In-750
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.3/4 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1/2"Offset & Mtg Hrdw In-500
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1/2 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1/4"Offset & Mtg Hrdw In-250
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Replacement part. 1/4 offset insert and mounting hardware.

Belt Drive Part,Fr Pulley 8Mm 3" Wide Special Offset For St Use W/Offset Insert&Nut 47-Ofp
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Replacement part. 3 wide 47 tooth front pulley only, without splined insert. or Softail kits. Fits 77032 & 77025.

Belt Drive Part,Fr Pulley 8Mm 3"Wide Bt W/Tapered Eng Shaft Open Primary Belt Drive..47T-3

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd.
3 Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1954 with tapered sprocket engine shaft fits kit 77010

Belt Dr Part,Fr Pulley 3" 8Mm Bt 55/84 Use W/77022,#77024 & #77011 Open Pri Belt Dr..47-S3

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd.
3 Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1955/1984 with splined engine sprocket shaft fits 77011, 77022 & 77024

Belt Guard,Lower Chrome Plated Fxr Flt Flht Flhs 1985/Later Replaces Hd 60397-85A
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Lower Belt Guard fits all FXR and FLT, FLHT, FLHS 1985/Later. (Imported)

Belt Guard,Upper Chrome Plated Big Twin 4 Spd 1980/L (Ex St) Rpls Hd60380-79 & Hd60388-82
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Upper Belt Guard fits all Big Twin 4 speed models 1980/Later. (Imported)

Pulley/Sprocket Spc,.375" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-FACTOR
• Polished
• CNC machined from billet aluminum with a polished circumference
• (Imported)

.375 Thick, for use w/Timken-type Bearings

Pulley/Sprocket Spc,.312" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-FACTOR
• Polished
• CNC machined from billet aluminum with a polished circumference
• (Imported)

.312 Thick, for use w/Timken-type Bearings

Pulley/Sprocket Spc,.500" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-FACTOR
• Polished
• CNC machined from billet aluminum with a polished circumference
• (Imported)

.500 Thick, for use w/Timken-type Bearings

Pulley/Sprocket Spc,.200" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-actor
• Offers expanded gearing options and increases tire to chain clearance by .200 over your stock sprocket allowing the use of a 150/160 series tire
• To properly align chain these sprockets must be used with 75439 rear wheel sprocket spacer
• When mounting to 1995/2005 models, use with our 74719 seal (HD# 12050) and our 72353 spacer (HD# 3334-85)
• See Drive Train Section for rear drive train and rear sprocket
• (Imported)

V-FACTOR Rear Wheel Sprocket Spacer
.200 Thick, Chrome Steel
Fits 5 Speed Sportster Late 1984/1999
or use w/Timken-type Bearings (Imported)

Belt Drive Part,Eng Pulley Nut Bt 4&5 Spd 55/06 W/Solid Mount Sprocket Rpls 24003-55 7816-1
Some folks like to show and some just want to go! Either way, we have you covered. or best results, always install the correct washer, especially on front pulleys that have a removable steel center.Colony
Chrome Plated (Grade 5) acorn style
Fits all primary belt drive kits on Big Twin 1955/2006 with spline shaft (except Dyna 2006/Later)
Replaces HD# 24003-55

Belt Drive Primary Kit,1-1/2" Fits Softail And Dyna 2007/L* Inc Lock Up Clutch Evb-8Sl

• Enclosed 1 1/2 belt drive with ball bearing lock up clutch kit for stock to extreme horsepower motors
• 36-69 tooth combo provides 1.33:1 drive ratio

Belt Drives Ltd.
Polished Kit
Fits Softail 2007/2008

Belt Dr Kit Primary 14Mm Pol St 90/06,3-3/8" Open W/Clutch Billet W/Brg Support Tf-2000
The 14mm by 3 3/8 belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission mainshaft. The outboard support plate is reversible. The back side is channeled for another distinct look, but just the flat side will be polished.

eatures:

• 14mm x 85mm (3 3/8) wide belt, the same belt as used on top fuel Harley-Davidson^® race bikes
• Kevlar^™ clutch has nine 6 3/8 diameter frictions & eleven steels for ultimate power transfer
• Speciallly manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
• Hub is manufactured from 7075 aluminum and hard anodized for maximum strength and longevity
• 30-46 tooth combo provides 1.53:1 drive ratio

Belt Drives Ltd.
Polished Kit with Outboard Bearing Support (Top uel Street Drive)
Fits Softail 1990/2006

Belt Drive Kit,Primary 11Mm Bt 80/E84 4Spd Es Rr Belt Mdls Closed Pri 1-1/2" 47-31Se-Rb

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
11mm Belt Drive
Fits Big Twin 4 speed 1980/Early 1984
4 speed Electric Start Model with Rear Belt Drive
31T-47T Pulley Combo

Belt Drive Kit,Primary 11Mm Bt 80/E84 1-1/2 Alum Primary 5Spd Es Ch Dr W/Idler 47-31Se5

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
11mm Belt Drive
Fits Big Twin 4 speed 1980/Early 1984
5 speed Electric Start Model with Rear Chain Drive
31T-47T Pulley Combo

Belt Drive Kit,Primary 11Mm Bt 65/E84 1-1/2,Alum Primary 4Spd Es Ch Dr W/Idler 47-31Se4

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
11mm Belt Drive
Fits Big Twin 4 speed 1965/Early 1984
4 speed Electric Start Model with Rear Chain Drive
31T-47T Pulley Combo

Belt Drive Kit,Primary 11Mm Bt 65/E84 1-1/2,Alum Primary 4 Spd Ks W/Idler . 47-31Sk-3

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
11mm Belt Drive
Fits Big Twin 4 speed 1965/Early 1984
Kickstart Model
31T-47T Pulley Combo

Belt Drive Kit,Primary 11Mm Bt 55/64 Ks Closed Primary 1-1/2" No Idler. Bdl 47-31Sk-2

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
11mm Belt Drive
Fits Big Twin 4 speed 1955/1964
Kickstart Model
31T-47T Pulley Combo

Belt Drive Pri & Cl Kit 8MM Softail & Dyna 5 Spd 1990/20061-5/8" Belt

Evbb-2Sl

Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stress proof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized.

Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required.

Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
1 ⁵/₈ wide Belt Drive Kit with Clutch
Fits Softail & Dyna 5 speed models 1994/2006 with spline clutch hub, 45-68 tooth combo
* Includes the earlier style heavy duty 66 tooth starter ring gear and a matching 9 tooth starter pinion gear

Belt Dr Pri Kit,8Mm Ks Only Bt 1955/E1984,3" Open Unit W/Quiet Clutch Ev-72-47S

• 3 wide open belt drives
• BDL pulleys are machined from a 356-T6 aluminum aircraft alloy and hard anodized
• A fiberglass reinforced belt is used in these kits
• Includes BDL's Quiet Clutch
• The inner clutch hub uses a 40mm double row bearing for added strength compared to stock which is 35mm
• The precision machined pressure plate (polished aluminum) uses 9 springs and shoulder bolts to insure even spring pressure
• Includes instructions

Note: Requires part 73200 stock type clutch hub nut (not included in the kit)

Note: Due to numerous variables of misalignment and improper tension upon installation, there is no warranty on belts.Belt Drives Ltd.
1.53:1 Drive Ratio Belt Drive Kit
47-72 pulley tooth highway combo
Replacement belt 77522
Fits Big Twin 1955/Early 1984 with rear chain drive

Belt Dr Pri Kit,8Mm Ks Only Bt 1955/E1984,3" Open Unit W/Quiet Clutch Ev-76-47S

• 3 wide open belt drives
• BDL pulleys are machined from a 356-T6 aluminum aircraft alloy and hard anodized
• A fiberglass reinforced belt is used in these kits
• Includes BDL's Quiet Clutch
• The inner clutch hub uses a 40mm double row bearing for added strength compared to stock which is 35mm
• The precision machined pressure plate (polished aluminum) uses 9 springs and shoulder bolts to insure even spring pressure
• Includes instructions

Note: Requires part 73200 stock type clutch hub nut (not included in the kit)

Note: Due to numerous variables of misalignment and improper tension upon installation, there is no warranty on belts.Belt Drives Ltd.
1.61:1 Drive Ratio Belt Drive Kit
47-76 pulley tooth power combo
Replacement belt 77504
Fits Big Twin 1955/Early 1984 with rear chain drive

Belt Drive Kit Primary 3"X8Mm Bt 55/E84 4Spd Ks Open Pri Adj Trn Splined Eng Sft 76-47-3S

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
8mm Belt Drive
Fits Big Twin 4 speed 1955/Early 1984
3 Kickstart Model
47T-76T Pulley Combo

Belt Drive Kit Primary 2"X8Mm Bt 55/E84 4Spd Ks Open Pri Adj Trn Splined Eng Sft..76-47-2S

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
8mm Belt Drive
Fits Big Twin 4 speed 1955/Early 1984
2 Kickstart Models
47T-76T Pulley Combo

Belt Drive Kit,Primary 8Mm Bt 80/E84 4Spd Es Rr Belt Mdls Closed Pri 1-1/2" Bdl 61-41Rb

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
8mm Belt Drive
Fits Big Twin 4 speed 1980/Early 1984 models with rear belt drive
1 ¹/₂ Electric Start Model
41T-61T Pulley Combo