Mid-USA

Foot Shift Mount Reinforced Cp Fl 1952/1984 Fr Control Fx 1971/1985 Rpls Hd 33630-70

• Designed like the OE mount but reinforced where the original part normally cracks
• Includes grease fitting for the shift lever bushing

V-FACTOR
Chrome Plated
Fits L 4 speed models 1952/1984
Can also be used as a forward control mount on X 4 speed models 1971/1985 if a footrest is used in the highway bar mount
Replaces HD# 33630-70
(Imported)

Shift Rod With Ball Joints, Fits Fxr Mdls 1982/L*, Chrome, Replaces Hd# 33728-82A
This high quality Ball Joint Shift Rod Assembly is manufactured to the exact specifications of OEMV-FACTOR
Chrome Plated
Fits FXR models 1982/Later
Replaces HD# 33728-82A
(Imported)

Dust Boots,Front Fork Rubber Fl Flh Flt 1949/Later W/O Tin Slider Covers

• Black, high quality Neoprene
• Keeps the dirt out of the fork seals

V-FACTOR
Fits L, FLH, FLT models 1949/Later when Tin Slider Covers are removed
Sold in Pairs

Fork Boots,Black Rubber Fits 41Mm Fxst,Fxdwg,Fxwg
V-FACTOR
Black Rubber Boots
Fit XST, XDWG & XWG (41mm)

Chrome Side Cover Trim Rails Fits Flh & Flt Models 1993-Later, 66064-93

• Mounts on the side covers of bagger models
• Manufactured from high quality steel
• Includes left and right trim rails and mounting hardware

V-FACTOR
Show Chrome Plated
Fits FLH & FLT models 1993/Later
Replaces HD# 66064-93
(Imported)

Plug, Rear Fender Replaces Hd# 59749-06

• Plugs hole when antenna is removed or replaced with hidden type antenna

V-FACTOR
Rear ender Plug
Replaces HD# 59749-06
(Imported)

Rear Fender Struts Fits XL 1994/2003 Rpls Hd# 59896-94 & 59897-94

• Manufactured from high grade steel, except FXR & Sportster 1982/1989 which are made of die cast aluminum

V-FACTOR
Chrome Plated Pair
Fits Sportster models 1994/2003
Replaces HD# 59896-94 & 59897-94

Flat Rear Fender 6"Wide Universal Custom Use...6" Wide Rolled 14 Gauge Steel

• Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Kraft Tech
Raw Steel 6 wide flat fender
Fits Big Twin & Sportster Rigid frames

Circuit Breaker, 15Amp All Models 73/Later Replaces Hd# 74589-73

• Plastic housing with mounting brackets are one piece molded designs and are less prone to vibration
• Metal housings with brackets are two piece designs
• Made in the USA

POWER HOUSE PLUS
15 amp metal
Replaces HD# 74589-73

Stator Mounting Hardware Kit Big Twin 70/99 (Except Tc) Rpls Hd2918,2216W&29954-74A
V-FACTOR
Complete Kit with allen head stator mounting screws (lock plates not required) & stator plug retainer (the allen head screws are the only parts required on later models)
Fits Big Twin 1970/1999 (except Twin Cam)
Replaces HD# 2918, 2216W, 29954-71A

• Faithful reproduction of the factor master cylinder in show chrome plating
• Use with our Part MID-45221 chrome remote reservoir to finish the job

V-FACTOR
Chrome Plated Master Cylinder
9/16" Bore
Fits XST & FXR 1987/1999
Replaces HD# 42446-87B

Ignition Part,Tach Adapter Adapts Tach To #17546 Dyna Ign System Single Fire..Dyna T-101

• Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit
• Hall effect style ignition which uses magnetic pickups to trigger the spark
• Available in single or dual fire versions, with or without ignition coil(s)
• or best results use with our tuneable advance kit 17548
• Instructions included

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Tachometer Adapter

Reg/Rectifier Plug Retainer,Ss Bt Evo 70/99 W/Rh Angle Plug Secures Plug To Stator End

• Designed to hold the regulator/rectifier plug tight against the stator plug preventing arcing and premature failure
• Mounts through front left engine mount bolt
• Made from 18-gauge 304 stainless steel

V-FACTOR
Stainless Steel
Fits Big Twin 1970/1999 with right angle plug

Powerhouse Ignition Module Bt 1970/1999 (Ex EFI&Tc Mdls) Sportster 1971/2003

• ully adjustable
• Use with kick or electric start
• Can be used as dual fire or single fire
• Your choice of single spark or multi-spark mode
• 10 different advance curves
• *Note: Will not work on bike equipped with lean angle switch (i.e. Sportster models 1998/2003)

Not legal for sale or use in California, or on any pollution controlled vehicles
POWER HOUSE PLUS
* Ignition Module Only
Fits single cam Big Twin 1970/1999 (except EI), Sportster 1971/2003 & 1200S 1996/2003

Ignition Part,Condenser XLch 58/69 Joe Hunt Fairbanks Morris Magnetos Rpls 29533-55A
High quality ignition condensers meet or exceed OEM specifications.Standard Motor Products
Fits XLCH 1958/1969 with Magneto and airbanks Morris, Joe Hunt and Morris Magnetos
Replaces HD# 29534-55A

Exhaust Drag Pipes Slash Cut Evo Spt 1986/2003 40" Long, 1-3/4" Od

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Chrome Plated Set
Fits Evolution Sportster 1986/2003

Headlight Parts,Lens Clear Replacement For 6-1/2"Springer Style Headlight #11027
Definitely a modern improvement over headlights used on Springer front ends from 1936/1954. This headlight fills the niche between the classic 7 and the 5 ³/₄ headlights. This new Springer style headlight uses a powerful 12 volt 100/55 watt halogen bulb. Headlight assembly is complete with bulb, adjustable mounting block and all hardware needed for installation.V-FACTOR
Replacement luted Clear Lens
(Imported)

Drive Belt,Rear Falcon Spc 20Mm,07/L* Softail 133T Hd 40073-07 Spc-133-20
Note: 20mm belts are not intended to be used in lieu of a 1-1/2 wide pulley and belt. Use of a 20mm wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd or MID-USA.

• Carbon fiber reinforced belt
• .33% more tensile strength than conventional aramid-reinforced belts
• High temperature rubber compounded belt provides excellent flex and service life
• eatures a patented fabric-reinforced tooth surface that can increase horsepower and improve wear resistance, all while able to sustain belt-penetrating debris without breakagealcon SPC
  133 teeth
  Fits Softail 2007/Later

Oil Tank, Oe Style Softail 00/Later Rpls. Hd 62498-00A
V-FACTOR
Chrome Plated Oil Tank
Fits Softail models 2000/Later (except XCW & XCWL)
Replaces HD# 62498-00A
(Imported)

Fuel Line,Clear Vinyl 1/4"Id X 1/2"Od 1/8"Wall 25 Ft Nylon Braid Reinforced

• ¹/₈ wall, open mesh nylon braiding has been incorporated within the clear vinyl, producing a pliable hose which will not shrink or harden
• Withstands high temperatures and pressures up to 750 PSI
• Highly resistant to fuel, oil and custom blended fuels

V-FACTOR
¹/₄ I.D. x ⁷/₁₆ O.D. fuel line
25 foot roll, (Imported)

Mikuni Pilot Jet 27.5 Fits Hs40,Hsr42,Hsr45,Hsr48 Smoothbore Carbs

• Precision machined from brass for long life
V-FACTOR
Brass Pilot Jet, Size: 27.5
Fits HS 40, HSR 42, HSR 45 & HSR 48
Package of 5, (Imported)

Mikuni Carb Part,Main Jet 175 Fits Hs40,Hsr42 & Hsr45 Mikuni Smothbore Carb N100/604-175

• Use these genuine Mikuni Main Jets to fine tune your HS-40, HSR-42 or HSR-45 carburetor to the precise specifications of your engine
• Use Jet Needles listed to fine tune your HSR-42 carburetor
• Main Jets and Jet Needles are sold each

Mikuni
Main Jet, (Size 175)

Fuel Valve,1/4"Npt Male Thread 90 Degree Fitting Wo/Reserve Use 1/4" Id Hose

• Zinc Plated Steel uel Valve
• ¹/₄ NPT male fitting
• 90° outlet & a ball valve shut off
• Designed for use with ¹/₄ I.D. fuel line

Grommet & Spc Chain/Belt Guard Bt 4 Spd 63/L(Ex St)Dyna 91/99 St 86/92 Fxr 82/L #11411/5926B
Stock Style Mounting Grommet and Spacer to Mount Rear Belt and Chain Guards. Having measurements of 5/16 I.D. x 3/8 width they are great for universal use. Sold in packages of 10. (Rpls. HD 11411& 5926B)(Imported)

Trans Mainshaft Support Big Twin 4 Speed 1965/Later For Open Primary

• When installing open belt drive units or custom tin primary's, our Transmission Mainshaft Support will give the needed support when aluminum primary is not used
• Use with 77349 rubber shielded sealed bearing
• Will not fit with rear belt drive

V-FACTOR
Cast Aluminum
Fits Big Twin 4 speed 1965/Later

2" Primary Drive Belt, 8mm X 140T, BDL-140-2
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt.

Belt Drives Ltd.
Replacement Belt (2" Wide, 8mm, 140 Tooth) 48 & 69 Pulley Teeth Combo
Fits 1990/2006 Softail Signature Series

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt.
Belt Drives Ltd.
Replacement 1 ⁵/₈" wide Kevlar Reinforced Belt
Fits 45-68 tooth combination - 138 teeth
Fits Big Twin 5 speed Late 1985/Later with electric start

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL Belt Drives

ECRS-100

Belt Drives Ltd.
Clutch Steel Plate Kit
Includes: 7 Splined Steel Plates (.060" thick)
By: BELT DRIVES LTD

Axle Adjuster Kit,Chrome Plt Softail Models 2000/2007
Chrome Plated OE style Kit
Fits Softail 2000/2007

Clutch Pushrod Bearing Kit Big Twin Late 1975/Later Rpls Hd 37312-75,37313-80 & #11096
HARDWARE Clutch Pushrod Bearing Kit
Fits Big Twin, all years
Replaces HD# 37312-75 & 37313-80

Clutch Pushrod,Center 10-7/8" Center Bt 5 Speed 1990/2006 Replaces Hd 37088-90..Mfg.7236
All clutch pushrods are manufactured from heat treated steel and flame hardened at both endsHARDWARE
Diaphragm Clutch Center Pushrod
Fits Big Twin 5 speed 1990/2006
10 ⁷/₈ length
Replaces HD# 37088-90

Clutch Pushrod,Right 2-5/8" Lg Bt 4 & 5 Speed Late 1984/1990 Replaces Hd 37089-84..Mfg.7109
All clutch pushrods are manufactured from heat treated steel and flame hardened at both endsHARDWARE
Right Pushrod
Fits Big Twin 4 speed Late 1984/1986, 5 speed Late 1984/1990
2 ⁵/₈ length, use with flat shape clutch release bearing
Replaces HD# 37089-84