Mid-USA

Clutch Spring,Diaphragm Plate Big Twin Late 1984/1989 Replaces Hd 37871-84
Diaphragm clutch spring plate.

Clutch Hub Fits Big Twin 1984/1989 Rpls Hd 37550-84A

• This two piece clutch hub is machined from steel and billet alloy for long life and dependable service

V-FACTOR
OE style Clutch Hub
Fits Big Twin Late 1984/1989
Replaces HD# 37550-84A
(Imported)

Clutch Hub Bearing Kit Bt 36/84 W/10 Spring Clutch Eliminates Caged Rollers

• Eliminate creeping clutch by eliminating caged bearings and stopping the clutch hub from sagging

V-FACTOR
3 Stud Hub
Fits Big Twin 1936/1984 with 10 Spring Clutch
(Imported)

Clutch Hub Liner, Nylatron Big Twin 10 Spring Clutch Wet Or Dry...Replaces Hd 37549-41T
This high performance nylatron clutch hub liner kit will bring your old 10 spring Big Twin clutch into the modern age by providing smooth clutch action and diminishing chatter. Can be run wet or dry, this hub liner kit reduces friction and resists wear. Combine it with our 73128 Clutch Hub. Bearing Kit and you'll have the best, smooth acting, virtually maintenance free clutch assembly available. Clutch Hub Liner Kit fits all Big Twin models 1941/Later 10 Spring Clutch.

Timer Cover Flat Steel Oe Type Bt 70/99(Ex Tc88)Spt 71/L* Cp Rpls Hd 32588-70A,32509-77
These ignition timer covers give that original or custom style look to your bike. See the electric section for cover mounting hardware and cover gaskets.V-FACTOR
Chrome Plated and OE style
Fits Big Twin 1970/1999 (except Twin Cam) & Sportster 1971/Later
Replaces HD# 32588-70A & 32509-77
(Imported)

Cam Thrust Plate / Lock Washer Big Twin 1958/1994 Replaces Hd 25550-57..Mfg.7183
HARDWARE
Lock Washer fits Big Twin 1958/Later
Cam Thrust Plate fits Shovelhead 1970/1984 & Big Twin Evolution 1984/1994
Package of 5
Replaces HD# 25550-57

Lh Eng Case Bearing Set Big Twin 1969/2002 W/Spacers Timken Brand Replaces Hd #9028
This matched Left Case Bearing Set includes the outer race spacer and the bearing spacer. The end play is pre-set by the manufacturer. To ease in removal and installation, use our 60747 Outer Race Tool and our 60820 Snap Ring Tool found in the general merchandise section.Timken
Left Engine Case Bearing Set with Spacers
Fits Big Twin 1969/2002 & Twin Cam 1999/2002
Replaces HD# 9028

Intake Valve, Oe Style Shovelhead 1966/1984 Rpls Hd# 18074-66

• These OE quality valves give you the option of rebuilding your worn out heads without the high cost of purchasing stainless steel valves
• Use these budget valves with confidence
• Manufactured to mirror the dimensions and materials used in the factory versions
• All head diameters, stem diameters and overall lengths are the same as OEM
• Sold Each

V-FACTOR
OE Style Intake Valve
Fits Shovelhead 1966/1984
Replaces HD# 18074-66

Kevlar Brake Pads,Front & Rear Bt 00/07, (Ex Sprg) Vrsc 02/05 Spt 00/03 Replaces 44082-00
We offer three types of Brake Pads:

• SBS - High level technology and experience gained through working with all types of brake systems produces these asbestos free disc brake pads.
• Hawk Performance - Brake pads offer world-class braking performance for heavy bikes. This product line combines the quality and fitment of original equipment with unsurpassed stopping power and quiet braking performance.
• V-FACTOR - Non-asbestos brake pads are manufactured from high grade Kevlar/metallic compound that is top of the line and environmentally safe. Super stopping power. Clean, quite and easy on rotors.

V-FACTOR
Disc Pad Pair
Fits FLT, FLHT, FLHR & FLTR 2000/2007 (front & rear), Softail (except Springer) 2000/2007 (front & rear), Softail Springer 2000/2007 (rear only), Dyna 2000/2007 (front & rear), VRSC 2002/2005 (front & rear), Sportster 2000/2003 (single or dual disc, front & rear)
Replaces HD# 44082-00

Axle With Spike Nuts 5/8 Diameter 9.5 Long Chrome Spike Nuts
This is a collection of axles and spacers for custom applications.V-FACTOR
Chrome Plated 9.5 long ront Axle with ⁵/₈ diameter with chrome spike nuts for custom applications
(Imported)

Dash Kit, Late Model Fits Big Twin 1984/1990 2240:60 Ratio

• Include cover, speedometer, ignition switch, base plate, tripometer reset knob and mounting hardware in an attractive display box
• All kits fit aftermarket and 1947/1990 at Bob tanks (solid mount and flatside)

V-FACTOR
Chrome Plated Late Model Kit
2240:60 Ratio
Fits at Bob tanks 1947/1990
(Imported)

Ins Panel Hrdw,Odometer Knob Softail Models 1990/1995 Chrome Replaces Hd 67212-93
V-FACTOR
Chrome Plated OE Replacement
Fits Softail models 1990/1995
Replaces HD# 67212-93 or 67215-89T
(Imported)

• Handlebar mounted stainless steel custom mini tachometers
• Designed to fit most bikes with stock length forks without any adapters or modifications
• Tachometers measure 2 5/8" O.D. x 2 1/16" deep
• Mini Tachometer has a 0 to 8000 RPM operating range
• Feature reinforced chrome plated steel mounts with rubber inserts for minimum vibration and also have 12 volt lighting capabilities

V-FACTOR
Stainless Steel Gauge with Chrome Plated Bracket
Fits all models, Mechanical Drive (2:1 Ratio)

Rear Mcl Rebuild Kit Flt 92/L*,Dnya 91/L*,St & Fxr L87/L*,Spt L87/03 42382-87A
V-FACTOR
11/16 Bore Master Cylinder Rebuild Kit
Fits Softail Late 1987/Later, FXR Late 1987/Later, Dyna 1991/Later, FLH & FLT 1992/Later, Sportster Late 1987/2003
Replaces HD# 42382-87A

Rear Brake Master Cylinder,Blk Touring Models 2008/Later* Rpls Hd 41763-08B

• aithful reproduction of the OE rear master cylinder for Touring models
• See below for availability of finishes and replacement parts

V-FACTOR
Black Master Cylinder
Fits Touring models 2008/Later
Replaces HD# 41763-08B

Master Cylinder Reservoir,Rear Bt 82/99 See Catalog Or Oem # For Fit Hd 41800-81A,41804-84A
Rear brake master cylinder fluid reservoir replaces the unsightly stock black version with a chrome plated ABS plastic part that is equal in quality to the stock part.V-FACTOR
Chrome Plated
Fits FXR models 1982/Later, FLHS-80 1983/1984, X models 1983/1985, FLT models 1983/1994 & XST models 1984/1999
Replaces HD# 41800-81A & 41804-84A

Cruisemate Throttle Assist Blk Fits All 1982/1995 Models Ironbraid# 2005-Blk

• Cruise-Mate is an easy to use lever operated throttle assist
• Once installed, Cruise-Mate is extremely reliable and easy to operate
• To set the throttle simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set
• lip lever back (toward rear of bike) and throttle returns to normal operation
• When adjusted properly the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency
• It is not a cruise control and will not maintain speed when going uphill
• All internal parts are made from Stainless Steel
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds
• Lifetime Guarantee

Ironbraid
Black Cruise Assist
Fits all Harley-Davidson^® Models 1982/1995

Cruisemate Throttle Assist Chrome Fits All 1982/1995 Models

• Cruise-Mate is an easy to use lever operated throttle assist
• Once installed, Cruise-Mate is extremely reliable and easy to operate
• To set the throttle simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set
• lip lever back (toward rear of bike) and throttle returns to normal operation
• When adjusted properly the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency
• It is not a cruise control and will not maintain speed when going uphill
• All internal parts are made from Stainless Steel
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds
• Lifetime Guarantee

Ironbraid
Chrome Cruise Assist
Fits all Harley-Davidson^® Models 1982/1995

Billet Alum Fat Bar Risers 08/L* Fxdf & Cust Ap W/1-1/4" Bars,Black,Uw 1-1/4" Bars

• orged 6061-T6 billet aluminum risers and clamp for 1 ¹/₄ diameter handlebars
• 5 rise height
• See below for availability of finish

V-FACTOR
Black Powder Coat Top Clamp & Risers
Fits XD 2008/Later & custom applications
Replaces HD# 59783-08 & 56898-08
(Imported)

Fr Fork Part,Lower Cup W/Stop Bt W/Replaceable Fork Cups Use Fxr Dyna Lower Fork Braket
This fork cup has a built in fork stop that cleans up frame neck area for that sanitary custom look. To prevent the cup from twisting in the frame a ³/₁₆ I.D. hole is provided in the fork cup so the frame neck can be drilled by the technician. A ³/₁₆ O.D. staking pin is also included. This fork steel fork cup is designed to be used with Big Twin frames with removable fork cups.V-FACTOR
Chrome Plated
Fits with OE style FXR or Dyna style lower fork bracket & also fits custom lower fork brackets with upriight fork stop nubs, (Imported)

Fork Boots,Black Rubber Fits 39Mm Fxd, XL
V-FACTOR
Black Rubber Boots
Fit XD & XL (39mm)