Bag Mounts and Hardware

4 piece set of bumpers made of rubber to replace the lower bumpers on saddlebags.

OEM: 90764-93

• Securely fasten your bags to your bike
• Fit 93-13 HD bags

• Protect your saddlebag lids from scuffs and scratches
• Made of form fitted vinyl
• Available in plain or studded

Chrome saddlebag supports are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.
Sold in a quantity of 2.

Saddlebag lid gasket has self adhering backing.

OEM: 90675-93

Measurements:

Saddlebag Gasket: 62" Long

• Made of high-quality steel with a black powder-coat or chrome finish
• Comes with fastening mechanisms
• Will work with fixed or detachable sissy bar side plates
• Use 93-13 style OEM hard-sided saddlebags which must be purchased separately
• Optional license plate bracket for Dyna is available in black only
• Optional Slick Signal license plate frame with LED run, turn, brake and plate lights; need to be hardwired; not DOT compliant
• Made in the U.S.A.

• Allows easy removal of strut-mounted saddlebag supports when used with quick-detachable back rest and luggage
• Once hardware is installed, saddlebag support brackets can easily be removed without removing hardware through struts and fenders
• Made from high-quality materials
• Made in the U.S.A.

• Everything needed to assemble and mount OEM-style hard saddlebags and saddlebag lids
• Features chrome right and left latch assemblies with hardware, chrome mounting brackets, wear plates with hardware, chrome lock set with keys, bail head studs and washers, grommets, and lid gaskets
• Lid tethers and faceplates are not included (must be purchased separately)

• Securely fasten your bags to your bike
• Fit 93-13 HD bags

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FLSTC/FLSTS applications are for OEM saddlebags
• Dyna Glide models, FXST, FLSTF and FLSTN applications are for OEM accessory leather saddlebags
• Will not work with rear highway/bag guards
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of the BareBacks when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1
• Made in the U.S.A.

• Available in chrome or black
• Include all necessary installation hardware and instructions
• Accept Drag Specialties passenger floorboards PART #1621-0463 or OEM H-D passenger floorboards (floorboards sold separately)

• Everything needed to assemble and mount OEM-style hard saddlebags and saddlebag lids
• Features chrome right and left latch assemblies with hardware, chrome mounting brackets, wear plates with hardware, chrome lock set with keys, bail head studs and washers, grommets, and lid gaskets
• Lid tethers and faceplates are not included (must be purchased separately)

• Made of one-piece steel construction and have Dzus clips for quick 1/4 turn bag detachment
• Softail brackets mount at two locations: on fender rails and behind the rear passenger pegs; relocation of rear turn signals for lid clearance may be required on some models
• Dyna brackets mount easily to the fender rails and shock stud; models with rear turn signals located on fender rails will require relocation of signals
• Sportster brackets mount easily to the fender rails and shock stud; rear turn signals must be relocated
• High-gloss powder-coat finish
• Designed for use with 93-13 FLT/FLHT/FLHR style saddlebags
• Made in the U.S.A.

• Made of high-quality steel with a black powder-coat or chrome finish
• Comes with fastening mechanisms
• Will work with fixed or detachable sissy bar side plates
• Use 93-13 style OEM hard-sided saddlebags which must be purchased separately
• Optional Slick Signal license plate frame with LED run, turn, brake and plate lights; need to be hardwired; not DOT compliant
• Made in the U.S.A.
• U.S. Patent #7,278,560.B2
• Will not fit models with Shotgun-style exhaust; exhaust must be lower than rear axle.
• Requires turn signal to be relocated on Fatboys.
• May not fit with all styles of axle covers.

• Take necessary precautions and properly support your saddlebags with these chrome-steel supports
• Prevents spoke-chewed luggage
• Attaches to existing hard mounts on the bike for quick installation
• Made of sturdy steel
• Bent to fit each bike model and then polished and chrome plated
• Sold in pairs
• Made in the U.S.A.

• Used for the ultimate custom look
• Goes from the frame to the lower saddlebag support brackets and replaces the saddlebag guards
• Allows the removal of the upper saddlebag rails
• Available in chrome or black
• Sold in pairs

• Used for the ultimate custom look
• Goes from the frame to the lower saddlebag support brackets and replaces the saddlebag guards
• Allows the removal of the upper saddlebag rails
• Available in chrome or black
• Sold in pairs

• High-quality replacements available for most dresser models
• Chrome-plated finish
• Check OEM # before ordering; sold as a set of one left- and one right-side bracket

• Stabilizes saddlebag support brackets side-to-side when using custom rear fender
• Use with Sumax Phantom saddlebag and exhaust support brackets PART #3501-0333 (above)
• Made of cold-rolled steel, then powder-coated in a high-gloss black finish
• Stainless steel fasteners included
• Made in the U.S.A.

• Made of high-quality steel with a black powder-coat or chrome finish
• Comes with fastening mechanisms
• Will work with fixed or detachable sissy bar side plates
• Use 93-13 style OEM hard-sided saddlebags which must be purchased separately
• Optional license plate bracket for Dyna is available in black only
• Optional Slick Signal license plate frame with LED run, turn, brake and plate lights; need to be hardwired; not DOT compliant
• Made in the U.S.A.

• Designed to attach/detach all Saddlemen saddlebags and any rigid-back aftermarket and OEM saddlebags with a twist of the QTL (Quarter Turn Locking) fasteners
• Complete kit includes docking posts and fasteners, turn signal relocator and support bracket
• For specific applications, components are also sold individually; see descriptions below
• Docking posts and fasteners replace fender strut bolts and allow you to put on or take off saddlebags with a quick twist of the QTL (Quarter Turn Locking) fasteners; includes four docking posts with fasteners, spacers, saddlebag grommets, support clips, nuts/bolts/fasteners needed and instructions
• Docking post kit should be used in conjunction with Saddlemen saddlebag support bracket; can be used to mount OEM H-D and H-D accessory saddlebags (except 1200S bags) without purchase of additional bracket
• Support bracket kit includes two chrome-plated steel saddlebag supports and comes with an assortment of 5/16" and 3/8" fasteners in lengths to fit the most popular H-D models and aftermarket accessories
• Two types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender rail

• Designed to attach/detach all Saddlemen saddlebags and any rigid-back aftermarket and OEM saddlebags with a twist of the QTL (Quarter Turn Locking) fasteners
• Complete kit includes docking posts and fasteners, turn signal relocator and support bracket
• For specific applications, components are also sold individually; see descriptions below
• Docking posts and fasteners replace fender strut bolts and allow you to put on or take off saddlebags with a quick twist of the QTL (Quarter Turn Locking) fasteners; includes four docking posts with fasteners, spacers, saddlebag grommets, support clips, nuts/bolts/fasteners needed and instructions
• Docking post kit should be used in conjunction with Saddlemen saddlebag support bracket; can be used to mount OEM H-D and H-D accessory saddlebags (except 1200S bags) without purchase of additional bracket
• Support bracket kit includes two chrome-plated steel saddlebag supports and comes with an assortment of 5/16" and 3/8" fasteners in lengths to fit the most popular H-D models and aftermarket accessories
• Two types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender rail

• Designed to attach/detach all Saddlemen saddlebags and any rigid-back aftermarket and OEM saddlebags with a twist of the QTL (Quarter Turn Locking) fasteners
• Complete kit includes docking posts and fasteners, turn signal relocator and support bracket
• For specific applications, components are also sold individually; see descriptions below
• Docking posts and fasteners replace fender strut bolts and allow you to put on or take off saddlebags with a quick twist of the QTL (Quarter Turn Locking) fasteners; includes four docking posts with fasteners, spacers, saddlebag grommets, support clips, nuts/bolts/fasteners needed and instructions
• Docking post kit should be used in conjunction with Saddlemen saddlebag support bracket; can be used to mount OEM H-D and H-D accessory saddlebags (except 1200S bags) without purchase of additional bracket
• Support bracket kit includes two chrome-plated steel saddlebag supports and comes with an assortment of 5/16" and 3/8" fasteners in lengths to fit the most popular H-D models and aftermarket accessories
• Two types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender rail