Cams Gears and Related

Cam,W/O Gear Grind # Tw26A Twin Cam 00/L 5 Speed Models Stock Springs Andrews.288126

• Want more power for your Twin Cam 88 Engine?
• Andrews Products has eight proven cam grinds to get you there
• More horsepower and torque for stock or modified engines is within easy reach
• All cam grinds listed are designed for use with stock HD hydraulic lifters

Note: (*) Timing and duration listed for .053 cam lift.Andrews
Application: Bolt-in Cam: 88-95 inches and stock compression ratio. Great for two up touring, this cam will add torque and horsepower at lower and middle RPM ranges. (1800-5200 RPM)
Grind: TW26a
Timing(*): 11/35, 41/09
Duration: .053 - 226, 230; .020 - 262, 266
Valve Lift: .490, .490
Lift @ TDC: .138, .112
Springs: Stock

Cams W/O Dr Spkt,Grind # Tw55 Twin Cam 00/L 5 Speed Models .550"Valve Lift,Andrews.288155

• Want more power for your Twin Cam 88 Engine?
• Andrews Products has eight proven cam grinds to get you there
• More horsepower and torque for stock or modified engines is within easy reach
• All cam grinds listed are designed for use with stock HD hydraulic lifters

Note: (*) Timing and duration listed for .053 cam lift.Andrews
Application: Great Cams for 95 inch engines with 9.8 to 10.2 CR. Max horsepower and torque at mid & upper RPMs (2600-6200)
Grind: TW55
Timing(*): 22/46, 52/20
Duration: .053 - 248, 252; .020 - 283, 292
Valve Lift: .550, .550
Lift @ TDC: .197, .181
Springs: Hi-Lift

Cam,W/Gear Viper 560V Big Twin Evo All Years* Hyd Or Mech Power House 560V
Dyno proven POWER HOUSE cams for maximum performance. rom bolt in, for more all around performance and touring, to .620 lift for those ground pounding street and strip machines.Hydraulic or Solid Lifters--Performance valve springs required. The best cam for higher compression 80 Cl 9:1/11:1 compression good for strokers up to 96 Cl wanting lots of torque. Stock or ported heads. should only be used with performance exhaust, carburetion and ignition. Very strong mid range with the ability to pull very hard up to about 6500 RPM depending on cylinder head air flow. Valve Lift .560. TDC Lift (at valve) In. .182 Ex. .182. Duration (degrees) In. 248 Ex. 252. Timing @ .053 18/50 54/18. Grind Viper 560V.

Cam,W/Gear Gt 530G Big Twin Evo All Years* Hyd Or Mech Power House 530G
Dyno proven POWER HOUSE cams for maximum performance. rom bolt in, for more all around performance and touring, to .620 lift for those ground pounding street and strip machines.Hydraulic or Solid Lifters--Performance valve springs recommended. Excellent cam for 80 Cl 9:1/10:1 compression works well with stock or ported heads. Performance cam for lighter Big Twins X and FXR type wanting a good mid range with fairly strong top end. Reworked carburetor jetting with performance exhaust and ignition is a real plus. Valve Lift .530. TDC Lift (at valve) In. .184 Ex. .184. Duration (degrees) In. 242 Ex. 246. Timing @ .053 18/44 50/16. Grind GT 530G.