Clutch Plate,Pressure Big Twin 10 Spring Clutch 7/16" Tk Alum Rpls Hd 38010-41 Can be used with any number of long studs on any Big Twin 10 spring clutch. Extra heavy 7/16 thick aluminum will not warp like the OEM stamped steel unit even when used with heavy duty clutch springs. Increases performance and life of clutch plates and springs. or best results, use with our nylon insert hex nuts 06763.
Clutch Plate Kit,Steel Drive Fits Bdl Chain Drive & #73129 Set Of 8 Bdl Cddp-100 Designed to upgrade your entire clutch assembly. Belt Drives Limited (BDL) has added their Competitor Clutch to their newly engineered Clutch Basket. With Fits Kevlar clutch plates this heavy duty assembly offers approximately 60% more surface area than OE. These feature a large 35mm hub bearing and 9 shoulder bolts and springs for accurate spring tension. Baskets include a 36 tooth sprocket. If you have the power...we have the clutch. Belt Drives Ltd. Replacement steel clutch plates Set of 8 drive plates
Steel Drive Clutch Plates Use With Bdl Clutch Kit #73127 Set Of 7 Steels, Bdl Cc-100-Cs
Provides about 60% more friction surface than stock clutches
Kevlar plates can be run wet or dry
Accurate spring tension is made possible with 9 coil springs and bolts
Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
Can be used with chain or belt primary drive
Belt Drives Ltd. Replacement steel clutch plate set (includes 7)
Friction Clutch Plate Set, Fits Bdl, Set Of 5, Kevlar Wet Or Dry, Cc-100-Cp
Provides about 60% more friction surface than stock clutches
Kevlar plates can be run wet or dry
Accurate spring tension is made possible with 9 coil springs and bolts
Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
Can be used with chain or belt primary drive
Belt Drives Ltd. Replacement friction clutch plate set (includes 5)
Steel Drive Clutch Plate Use With Bdl Clutch Kit #73110 .120"Plate Bdl Cc-130-Bp
Included in the clutch pack are 7 kevlar fibers that have 60% more surface area than OE
Patented ball bearing lock up pressure plate will handle any application up to and including big inch motorsBelt Drives Ltd Steel drive clutch plate, .120 Sold each
Steel Drive Clutch Plates Use With Bdl Clutch Kit #73110 Set Of 6 Steels,Bdl Cc-130-Cs
Included in the clutch pack are 7 kevlar fibers that have 60% more surface area than OE
Patented ball bearing lock up pressure plate will handle any application up to and including big inch motorsBelt Drives Ltd Steel drive clutch plates (set of 6)
Clutch Kit,Complete Wet Or Dry Bt 98/L* Kevlar Bonded/Steel Rpls 37392-98 37319-98 Btx-14 Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Kit includes 9 friction plates bonded to tempered steel and 8 tempered steel drive plates. Use without damper spring and retainer. Big Twin 1998/Later.
Clutch Kit,Complete Wet Or Dry Bt 41/E84 Extra Plate W/Steels Springs Rpls 37850-68 Btx-5E Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Extra Plate Kit includes 6 friction plates bonded to 6061-T6 aluminum with 5 tempered steel drive plates and 10 clutch springs. Big Twin 1941/1984.
Clutch Kit Wet Or Dry Bdl Bt 41/E84 Alum Backed Kevlar W/Drive Plt 37850-68 Btx-5 Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Kit includes 5 friction plates bonded to 6061-T6 aluminum and 4 tempered steeld drive plates. 1941/1984.
Join the K and G Cycles family of friends
Sign up for our mailing list to be the first to get great sales and promotional information.