Engine Mounts - FX

V-Twin Manufacturing Stabilizer Link, Chrome, FLT-FXR - Sold Each

Chrome stabilizer link is used with front engine mount or as a stock OE replacement.

OEM: 16219-79B

FLT 1979-2008
FXR 1982-1994

Measurements:

Eyelet inner: 3/8"
Eyelet outer: 1/2"
Extended Length: 5-1/2"
Collapsed

Top Engine Mount Heavy Duty Cp Softail Models 1984/1999 W/Horn Mount Rpls Hd 16852-83

• Replacement heavy-duty mount is ¹/₄ thick
• Complete with choke/horn bracket, mounting hardware and brackets

V-FACTOR
Chrome Plated
Fits Softail models 1984/1999
Replaces HD# 16852-83
(Imported)

Engine Mount,Top Heavy Duty Cp Fxr Evo 1984/Later W/Choke Bracket Replaces Hd 16216-83D
This replacement chrome plated heavy-duty top engine mount is ¹/₄ thick and is complete with choke/horn bracket.V-FACTOR
Chrome Plated
Fits FXR Evolution 1984/Later
Replaces HD# 16216-83D
(Imported)

V-Twin Manufacturing Top Motor Mount, Chrome w-Coil Bracket, 84-99 BT - PR

Chrome top motor mount set is a 2 piece design and features a tab to mount coil.

FXST 1984-1998
FLST 1986-1998

Tech Note:

Suggested to use with #31-1266 engine mount angle bracket

CUSTOM CYCLE ENGINEERING Top Stabilizer Link, made in the usa, Each, specific application, Harley 91-16 FX 12-16 FL

• Reduces engine vibration and aligns power train
• Adjustable rubber-isolated design
• Greatly reduces vibration especially at high speeds
• Replaces stock link which is metal-to-metal from top motor mount

CUSTOM CYCLE ENGINEERING Black Adjustable Front Engine Bracket, Motor Mount, Anodized, made in the usa, Aluminum, Each, specific application, Harley 91-16 FX 12-16 FL

• Replace stock front engine bracket with custom slotted bracket with alignment lines
• Allows the rider to dial in the engine to perfect alignment
• Slides the engine left or right using the same alignment principals as FXR or early FLT models
• Hash marks at 0.05" intervals
• Includes black anodized aluminum bracket, two 3/8-16 x 21/4 hex bolts and two 3/8-16 nyloc nuts

DRAG SPECIALTIES Isolator Rear Motor Mount, Harley 99-16 FX 12-16 FL

• High-quality replacement motor mounts
• Meet or exceed OEM specifications
• Install using OEM hardware
• Sold each

DRAG SPECIALTIES Rear Isolator Motor Mount, Harley 91-98 FX

• High-quality replacement motor mounts
• Meet or exceed OEM specifications
• Install using OEM hardware
• Sold each

DRAG SPECIALTIES Chrome Motor Mount Stabilizer, Harley 82-00 FX 80-08 FL 87 - 94 XL

• Available in a chrome finish
• Two required for FLT/FLHT/FXR applications
• One required for Dyna Glide applications
• Includes mounting hardware
• Sold each

PRO-ONE PERF.MFG. Chrome Top Motor Mount, Natural, Harley 84-99 FX 86-99 FL

• Machined from 6061 T-6 billet aluminum
• All are either triple show-chrome-plated or black anodized
• All components sold individually, allows for mixing and matching finishes to create a custom look
• Include necessary mounting hardware
• Black ignition/starter switch and chrome ignition key switch sold separately; see ELECTRICAL section

PAUGHCO Chrome Top Motor Mount, Natural, made in the usa, Each, specific application, Harley 84-89 FX 86-89 FL

• High-quality top motor mount
• Bolts not included
• Made in the U.S.A.

Engine Mount,Top Universal Cp Bt Evo All 84/L*,Tc88 Custom Use Rpls Hd 16242-90 16247-91
This two piece top engine mount measures ⁵/₃₂ thick and can be used for Softail type solid mount applications (use both pieces) or for rubber mounted engine applications (use one piece). The two piece design allows for the use of taller cylinders and/or an offset engine. This custom mount is designed for applications that do not require brackets such as the choke mount or horn mount connected to the top engine mount. rame bracket can be mounted on either top or bottom of motor bracket, using ³/₈ mounting bolts of your choice to bolt engine and frame bracket together. V-FACTOR
Chrome Plated Mount
Fits all Big Twin Evolution models 1984/Later & Twin Cam 88 engine when used in a solid mount type frame
Replaces HD# 16242-90 & 16247-91
(Imported)

Engine Mount,Top Hardbody Bt Evo In Solid Mt Custom Frm Stroker Cyls,Heavy Duty 2Pc Cp
Adjustable top engine mount is made from ¹/₄ thick steel. V-FACTOR
Chrome Plated Mount
Made exclusively for our HARDBODY wide tire frames using Big Twin Evolution engines with stock length and up to .200 longer cylinders. Also adjusts to fit all Big Twin Evolution engines in solid mount frames

Front Rubber Engine Mount Flt & Fxr Models 1980/2006 Replaces Hd 16207-79B
V-FACTOR
Fits all rubber mounted FLT & FXR models 1980/2006
Replaces HD# 16207-79B
(Imported)

Engine Mount Hrdw,Top & Lower Ohv Big Twin 1936/69 Hex Head Chrome Plated ..Colony 8164-19
Engine mount hardware kits with heat treated studs, bolts, nuts and heavy duty washers. Pieces included ().Colony
Chrome Plated Top & Lower Hex Head Hardware Kit
Fits Overhead Valve Big Twin 1936/1969 (27)

Engine Mount Hrdw,Top & Lower Big Twin 1970/1984 Hex Head Chrome Plated ..Colony 8806-17
Engine mount hardware kits with heat treated studs, bolts, nuts and heavy duty washers. Pieces included ().Colony
Chrome Plated Top & Lower Hex Head Hardware Kit
Fits Big Twin 1970/1984 (17)

Top Motor Mnt W/Choke Bracket Fits Big Twins 1948/1984 Rpls Hd# 16853-48 & 16882-67Ta
OE style mount available with or without choke cable bracket.V-FACTOR
Chrome Plated with Choke Cable Bracket
Fits Big Twin 4 speed models 1948/1984
Replaces HD# 16853-48 & 16882-67TA

V-Twin Manufacturing Velva Ride Motor Mount, Black - Kit

Urethane mount replaces stock on all Big Twins with rubber mounted engines. The formulated compounds enhance compression and rebound dampening properties for a 20% reduction in vibration.
For use on 5 and 6-speeds.
OEM: 16207-79B

FLT 1979-

V-Twin Manufacturing Chrome Billet Top Mount, 1991-98 FXD Mounted Frames with Evo - Sold Each

Top motor mount chrome billet will accept bolt on coil mount or key switch brackets.
For use on mounted frames with Evolution engines.

FXD 1991-1998

V-Twin Manufacturing Urethane Motor Mount Chrome Sifton - Sold Each

Urethane ISO mount replaces stock on all Big Twin rubber mounted engines. The mount plate is billet aluminum with a polyurethane bushing assembly.
The formulated compounds enhance compression and rebound dampening properties for a 20% reducationin v

V-Twin Manufacturing Chrome Top Engine Mount Set, Softail - Kit
OEM No: 69136-06 Chrome top engine mount set is without choke cable mount. Fits: FXST 2006-UP FLST 2006-UP UOM: 1 - KIT Country of Origin: Imported

V-Twin Manufacturing Urethane Motor Mount Black Sifton - Sold Each

Urethane ISO mount replaces stock on all Big Twin rubber mounted engines. The mount plate is of black finish billet aluminum with a polyurethane bushing assembly.
The formulated compounds enhance compression and rebound dampening properties for a 20

V-Twin Manufacturing Chrome Top Motorcycle Motor Mount, FXST 1984-1998 - Sold Each

Chrome top engine mount features an integral coil mount for use with 80" to 100" Big Twin engines.
It features billet construction, provides a coil mounting location that is up and behind the normal top engine mount leaving this area open for the sw

V-Twin Manufacturing Chrome Top Motorcycle Motor Mount, FXST 1984-1998 - Sold Each

Chrome top motor mount features an integral coil mount for use on 101"-up Big Twin engines.
Chrome top motor mount with integral coil mount features billet construction, provides a coil mounting location that is up and behind the normal top motor mo

V-Twin Manufacturing Billet Coil Mount Bracket, 1992-up BT - Sold Each

Ignition coil mount bracket will attach to 3 bolts on the stock engine mount to mount coil. Coil mount bracket is made of billet alloy.
For custom application on 1992-up Big Twin models.

Custom application

V-Twin Manufacturing Sifton Top Motor Mount Strap, Chrome - Sold Each

Bottom engine mount replaces the stock engine mount on rubber mounted engines. The mount plate is chrome steel with a polyurethane bushing assembly.
Urethane motor mount utilizes formulated compounds that enhance compression and rebound dampening pr

V-Twin Manufacturing OE Rear Motor Mount, 1999-up FXD - Sold Each

Rear engine mount.

OEM: 47564-99

FXD 1999-UP

Measurements:

Length: 4-1/2"
Total Width: 2-13/16"
Drilled Holes C2C: 1-1/4"
Threaded Holes C2C: 1-1/8"
Thread: 3/8"-16

V-Twin Manufacturing Chrome Top Motorcycle Motor Mount, 2000-Up FXST-FLST - Sold Each

Top motor mount chrome billet

FXST 2000-UP
FLST 2000-UP

V-Twin Manufacturing Top Motor Mount, Chrome, 1992-99 Dyna - Sold Each

Chrome Top Engine Mount Cross Strap

OEM: 16242-90

FXST 1984-1998
FLST 1986-1998
FXD 1991-1998

V-Twin Manufacturing Top Motor Mount , Chrome, 2 Piece, 1984-99 Evo FLT - Kit

Chrome top engine mount is a two piece design to be installed on rubber mounted engines in stock or custom solid mount frames. For Evolution engines.

FLT 1984-1998

V-Twin Manufacturing Motor Mounts, Chrome, 1984-99 FXST-FLST - Set

Chrome heavy duty motor mount kit includes 2 mounts constructed of 1/4" thick steel, horn, and choke mount. This mount has provisions to direct mount two bolt ignition coils.

FXST 1984-1998
FLST 1986-1998