Motorcycle Oil and Fuel Line Fittings and Clamps

Oil/Fuel Fitting,1/8" Male Npt Npt To 5/16"Od Straight Hose Nipple Chrome Plated Mfg .2025
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₈ NPT Male to ⁵/₁₆ Nipple

Hose Ends,Fuel & Oil Line Cp Use With 5/8" O.D. Hose Aluminum W/Ss Clp 936-06Dch-6

• Goodridge hose finishers are perfect for low pressure applications like Harley oil lines and fuel crossovers
• Quality chrome hose finishers are constructed of anodized aluminum with stainless steel gear drive clamp
• Quality racing look at an affordable priceGoodridge
  Chrome Plated, ⁵/₈ Hose O.D.
  (Imported)

Oil Fitting,90 Degree Elbow Cp 1/8"Npt Male To Female See *N* Replaces Hd 26338-68..Mfg.2035
HARDWARE
Chrome Plated Oil Line itting
90° elbow with male/female ends
Fits Shovelhead 1968/1984, Big Twin Evolution 1984/1999, FLT 1993/1998
Package of 5
Replaces HD# 26338-68

Fuel/Oil Line End,Grooved Fits Hose 5/8"Od 5/16"&3/8" Id Blue Anodized W/Worm Clamp

• All gas line and oil hose need some type of end clamp, so if you have to clamp it you might as well make it look good
• The circle grooved hose ends are 6061-T6 aluminum and the worm clamps are stainless steel
V-FACTOR
Blue Anodized Grooved style
Fits hose with ⁵/₈ O.D., ⁵/₁₆ & ³/₈ I.D.
Package of 6, (Imported)

Oil Line End,Custom Nickel Fits 3/8" Id Hose To 9/16-18 Male...Goodridge 136-0106E
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for #6 Oil Line and Adapter ittings.

• Ends attach easily yet securely to the oil line
• Steel construction for strength
• Corrosion resistant finish
• The ⁹/₁₆-18 threaded female end is designe to fit with the #6 adapter fittings found in the fuel section (37° sealing taper)

Goodridge
Nickel Plated Straight Line End
(Imported)

Fuel & Oil Line Cutoff Shears Cut All Vinyl And Nitrile Fuel And Oil Lines 12-0013

• No more crooked cuts with this professional grade tool
• 2.5:1 leverage ratio reduces hand fatigue
• Non-slip plastic grips for safety
• Hole in handle for convenient storage
• Teflon^® coated blade for smooth cuts
• Shears line up to 1 O.D.

Note: Not designed for braided stainless steel hoseMotion Pro
8 total length

Oil/Fuel Fitting,1/8" Male Npt Npt To 1/4" Straight Hose Nipple Chrome Plated Mfg .2026
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₈ NPT Male to ¹/₄ Nipple

Oil & Fuel Fitting 1/4 Npt X 3/8" Nipple Chrome
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₄ NPT Male to ³/₈ Nipple

Oil/Fuel Fitting,1/8" Male Npt Npt To 1/4"Od 90 Degree Hose Nipple Chrome Plated Mfg .2034
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated 90° Hose Nipple
¹/₈ NPT Male to ¹/₄ 90° Nipple
Package of 5

Oil/Fuel Fitting,1/8" Male Npt To 3/8"Od 90 Degree Hose Nipple Chrome Plated Mfg .2030
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated 90° Hose Nipple
¹/₈ NPT Male to ³/₈ 90° Nipple
Fits FLT 1993/1998 & oil tanks, all models

Oil & Fuel Fitting Strt Cp L/8"Npt To 3/8"Od Nipple See *N* For Use Rpls 63533-41
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₈ NPT Male to ³/₈ Nipple
Fits K Model & Sportster 1967/1976, Dyna 1991/1998, FLT models 1993/1998, L & X 1965/Later, Softail Early 1984
Replaces HD# 63533-41

Oil Line Fitting,Pump & Tank Bt 1936/1964 45Ci All Years Cp Replaces Hd 63533-15."Hwd"2010

• Exact duplicate of the original type used
• Use with braided stainless steel or stock rigid steel oil lines
• Will adapt any ¹/₈ NPT female to Harley-Davidson^® oil lines
• itting screws into oil tank and oil pump

HARDWARE
Fits Big Twin 1936/1965 & 45ci, all years
Chrome Plated, Package of 3
Replaces HD# 63533-15

Hose Ends, Fuel & Oil Line Cp Use With 1/2" O.D. Hose Aluminum

• Goodridge hose finishers are perfect for low pressure applications like Harley oil lines and fuel crossovers
• Quality chrome hose finishers are constructed of anodized aluminum with stainless steel gear drive clamp
• Quality racing look at an affordable price
• Chrome Plated 1/2" Hose O.D.

QTY 6 hose ends

(Imported)

Oil Line Fitting,Spec Adapter #6 An To 3/8"Npt 90 Degree #6 Male Aluminum 822-06-06De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
³/₈ NPT 90° Angle
(Imported)

Oil Line Fitting,Spec Adapter #6 An To 1/4"Npt 90 Degree #6 Male Aluminum 822-06De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
¹/₄ NPT 90° Angle
(Imported)

Oil Line Fitting,Spec Adapter #6 An To 1/8"Npt 90 Degree #6 Male Aluminum 822-06-02De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
¹/₈ NPT 90° Angle
(Imported)

Oil Line Fitting,Spec Adapter #6 An To 1/4" Npt 45 Degree Aluminum Fitting Mfg# 823-06De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
¹/₄ NPT 45° Angle
(Imported)

Oil Line Fitting,Spec Adapter #6 An To 3/8"Npt Straight #6 Male Aluminum 816-06-06De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
³/₈ NPT Straight
(Imported)

Oil Line Fitting,Spec Adapter #6 An To 1/4"Npt Straight #6 Male Aluminum 816-06De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
¹/₄ NPT Straight
(Imported)

Oil Line Fitting,Spec Adapter #6 An To 1/8"Npt Straight #6 Male Aluminum 816-06-02De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
¹/₈ NPT Straight
(Imported)

Oil Line Fitting,Spec Adapter #6 An To3/8"Npt 90 Degree #6 Male Aluminum Russell R60841
These #6 Adapter ittings are made with the same Endura™ coated aluminum as our hose ends and have a matching 37° sealing surface. The compression fit adapter is designed for oil tanks that incorporate welded-in type oil fittings with a .380 O.D. and a single upset at the end (similar to what is found on 1986/1999 Softail oil tanks). All other fittings have a NPT (pipe threat) end.Russell
³/₈ NPT - 90°

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 90 Degree 1/4"Npt 822-06Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
90° to ¹/₄ NPT Adapter

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 90 Degree 1/8"Npt 822-06-02Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
90° to ¹/₈ NPT Adapter

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 45 Degree 1/4"Npt 823-06Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
45° to ¹/₄ NPT Adapter

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 45 Degree 1/8"Npt 823-06-02Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
45° to ¹/₈ NPT Adapter

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines Straight 1/4"Npt 816-06Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
Straight to ¹/₄ NPT Adapter

Oil Line Fitting 90 Degree Cp Uw/ Goodridge -6 Oil Hose 1/8 Npt W/ 360 Degree Swivel
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with -6 (dash six) oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge -6 Oil Line.

• Steel ends attach easily yet securely to the oil line
• Threaded male fittings have a ¹/₈ -27 NPT thread
• The female fitting is designed for oil tanks that incorporate welded-in type oil fittings with a .380 O.D. and a single upset at the end (similar to what is found on 1986/1999 Softail oil tanks)

Goodridge
Chrome Plated 90° End
(Imported)

Oil Line End,Custom Nickel Fits 3/8" Id Hose To 9/16-18 Male...Goodridge 136-4506E
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for #6 Oil Line and Adapter ittings.

• Ends attach easily yet securely to the oil line
• Steel construction for strength
• Corrosion resistant finish
• The ⁹/₁₆-18 threaded female end is designe to fit with the #6 adapter fittings found in the fuel section (37° sealing taper)

Goodridge
Nickel Plated 45° Bend Line End
(Imported)

Oil Tank Nipple Fitting Cp Uw/Goodridge -6 Oil Hose And Welded-In Tank Fitting
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with -6 (dash six) oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge -6 Oil Line.

• Steel ends attach easily yet securely to the oil line
• Threaded male fittings have a ¹/₈ -27 NPT thread
• The female fitting is designed for oil tanks that incorporate welded-in type oil fittings with a .380 O.D. and a single upset at the end (similar to what is found on 1986/1999 Softail oil tanks)

Goodridge
Chrome Plated Oil Tank Nipple End
(Imported)