Speedometers

Electronic speedometer with tachometer starts at zero.
Certain years and models will require separate purchase of correct wiring harness and tachometer adapter. Please see tech notes.

*NOTE: Gauge reads in kilometers per hour, 0-220KPH.

*Note: Tach wire harness, required all models, all years P/N VT- 32-1336

FLST 1996-2003
FXST 1996-2003
FLHR 1996-2003
FXDWG 1996-2003

V-Twin Manufacturing 2240:60 Ratio Speedometer w-Tach, 1991-95 FLH-FXST-FLST - Sold Each

Speedometer has a ratio of 2240:60 and features built in electric tachometer, and operates from coil impulse.
Accepts a 12mm cable.

FXST 1991-1995
FLST 1991-1995
FXDWG 1991-1995

Replica 2:1 Speedometer with Orange Needle
Replica speedometer has a ratio of 2:1. This speedometer features a dome glass lens with stainless narrow bezel, and orange airplane style needle. The rim and glass is included, but not installed. Includes knurled early style reset knob.
Speedometer features a male fitting on back for use of a 5/8" female nut cable fitting. For use with an 11 tooth transmission drive unit. Unassembled speedometer includes reset knob, bezel, needle glass, and complete speedometer assembly. Components do not interchange with original. Bezel may be affixed by silicone or returned to V-Twin Motor Shop to install the bezel with our factory style tooling. The reset knob is removable, knurled, and is encased in rubber. Face and rim are not installed. Speedometers are shipped unassembled so customer can customize face with graphics for restoration purposes. After the personalized graphics have been completed, the unit can be returned to the Motorshop for assembly. Rim must be crimped in place after assembly. V-Twin offers Rim and Lense Installation VT #60-0743.
Fits:
FL 1941-1961
EL 1936-1940
WL 1936-1952
UL 1938-1948
UOM: 1 - EA
Country of Origin: Imported

DRAG SPECIALTIES Electronic Speedometer, Harley 96-03 FX 96-03 FL

• OEM replacement electronic speedometer; includes all OEM gauge functions including check engine light
• Plug-in installation in 99-03 models
• Available in mph or km/h
• Sub-wire harness is required for all other applications listed; available separately; allows plug-in installation of late-style speedometer to 96-98 factory main wire harness

Custom Mini Speedo,2:1 Ratio Fx,Fxr 1973/1990,Spt 1973/1990 W/Fr Whl Dr Ss Case Cp Hrdw

• Chrome Plated reinforced handlebar clamp with a rubber insulator to minimize vibration
• Designed to fit most bikes with stock length forks without any adapters or modifications
• Instrument measures 2 ⁵/₈ O.D. by 2 ¹/₁₆ deep
• 140 MPH face

V-FACTOR
Stainless Steel Gauge with Chrome Plated Clamp & 2:1 Ratio
Fits X, FXR 1973/1990 & Sportster 1973/1990 with front wheel drive
No cable included, (Imported)

Speedometer, Fat Bob 2:1 16Mm Fl 47/67 Fl Fx Fxr XL 81/84 Bullseye Face

• 120 MPH faces
• Will fit all at Bob instrument panels with dash mounted speedometers
• Designed for use with 12 mm or 16mm speedometer cable nut as listed below
• Requires 48235 tripometer reset knob (not included)

Note: These speedometers do not incorporate the circuitry required for models with self-cancelling turn signals.V-FACTOR
1946/1947 ace style, 2:1 drive ratio
Fits transmission drive L 1947/1967, front wheel drive L, X, FXR & Sportster 1981/1984 (except Softail & XWG) for 16mm Cable (Imported)

Speedometer, Fat Bob 2:1 16Mm Fl 47/67 Fl Fx Fxr XL 81/84 Tombstone Face

• 120 MPH faces
• Will fit all at Bob instrument panels with dash mounted speedometers
• Designed for use with 12 mm or 16mm speedometer cable nut as listed below
• Requires 48235 tripometer reset knob (not included)

Note: These speedometers do not incorporate the circuitry required for models with self-cancelling turn signals.V-FACTOR
1962/1967 ace style, 2:1 drive ratio
Fits transmission drive L 1947/1967, front wheel drive L, X, FXR & Sportster 1981/1984 (except Softail & XWG) for 16mm Cable (Imported)

V-Twin Manufacturing 2:1 Ratio Speedometer w-Tach, 1981-90 FLH-FXST-FLST - Sold Each

Speedometer has a ratio of 2:1 and features a built in tachometer to operate from coil impulse.
Use with a 5/8" speedometer nut and a 11 tooth transmission drive unit.

FL 1941-1961

Tech Note:

Suggested to use with #36-0621 black

DRAG SPECIALTIES Polished/Black Face 140 MPH 1 7/8" Mini Mechanical Speedometer, Front Wheel, Transmission

• Polished, stainless steel housing
• Available with 2240:60 or 2:1 ratio
• Accept 12mm cable
• LED illuminated face
• Include mounting clamp for 1" - 11/4" tubing
• Matching tachometer PART #s 2211-0055, 2211-0056 available separately

DRAG SPECIALTIES Black Speedometer Relocation Bracket, Harley 04 - 13 XL

• Relocate the OEM speedometer and indicator lights to the left side of the motor replacing the top motor mount bracket
• Include mount bracket, gauge/indicator light mount and backing plate
• Mount using existing hardware

DRAG SPECIALTIES Chrome Speedometer Relocation Bracket, Natural, Harley 04 - 13 XL

• Relocate the OEM speedometer and indicator lights to the left side of the motor replacing the top motor mount bracket
• Include mount bracket, gauge/indicator light mount and backing plate
• Mount using existing hardware

DRAG SPECIALTIES 220 KM/H Black Face Programmable Mini Electronic Speedometer With Odometer/Tripmeter 2.37"

• Programmable with any sending unit that sends 3,000 - 90,000 pulses per mile
• Available in a polished or matte black finish in 1.87" or 2.4" diameter metal housing with a black or white gauge face
• Features a 12V LED backlit display
• Digital odometer has two resettable trip meters
• Remote single-button switch allows easy changing between odometer and trip meter
• Compatible with all 95-03 OEM sensors and most aftermarket sensors
• Matching tachometer PART #s 2211-0031, 2211-0032 or 2211-0121, 2211-0122, 2211-0123, 2211-0124 (1.87") available separately

DRAG SPECIALTIES 140 MPH 2.4" Black Face Programmable Mini Electronic Speedometer With Odometer/Trip Meter Matte Blac

• Programmable with any sending unit that sends 3,000 - 90,000 pulses per mile
• Available in a polished or matte black finish in 1.87" or 2.4" diameter metal housing with a black or white gauge face
• Features a 12V LED backlit display
• Digital odometer has two resettable trip meters
• Remote single-button switch allows easy changing between odometer and trip meter
• Compatible with all 95-03 OEM sensors and most aftermarket sensors
• Matching tachometer PART #s 2211-0031, 2211-0032 or 2211-0121, 2211-0122, 2211-0123, 2211-0124 (1.87") available separately

DRAG SPECIALTIES Black Mini Mechanical Speedometer, Front Wheel, 2240:60

• Available with a white or black translucent face
• Water-resistant, vibration-resistant with chrome or black housing
• Select styles have odometer, trip meter as listed, and reads speeds up to 140 mph or 220 km/h
• Trip meter knob is not removable
• Accept 12mm cable
• Backlit with 12V bulb; replacement bulbs available separately, see page ???

DRAG SPECIALTIES Black Face 2.4" Mini Mechanical Speedometer With LED Indicators, Front Wheel, White, Natural, Chrome, Each, 2:1, 12mm

• Feature a trip meter and four LEDs built into the face of the speedometer
• Blue for high beam, green for neutral, red for oil pressure and yellow for turn signals
• Accept a 12mm cable
• Available with a white or black face in mph and km/h
• Backlit with long-lasting LEDs
• Include wiring, connector and handlebar clamp
• Matching tachometer PART #s 2211-0103, 2211-0104 available separately

DRAG SPECIALTIES 140 MPH 2.4" White Face Programmable Mini Electronic Speedometer With Odometer/Trip Meter Polished

• Programmable with any sending unit that sends 3,000 - 90,000 pulses per mile
• Available in a polished or matte black finish in 1.87" or 2.4" diameter metal housing with a black or white gauge face
• Features a 12V LED backlit display
• Digital odometer has two resettable trip meters
• Remote single-button switch allows easy changing between odometer and trip meter
• Compatible with all 95-03 OEM sensors and most aftermarket sensors
• Matching tachometer PART #s 2211-0031, 2211-0032 or 2211-0121, 2211-0122, 2211-0123, 2211-0124 (1.87") available separately

DRAG SPECIALTIES 140 MPH 2.4" White Face Programmable Mini Electronic Speedometer With Odometer/Trip Meter Polished

• Programmable with any sending unit that sends 3,000 - 90,000 pulses per mile
• Available in a polished or matte black finish in 1.87" or 2.4" diameter metal housing with a black or white gauge face
• Features a 12V LED backlit display
• Digital odometer has two resettable trip meters
• Remote single-button switch allows easy changing between odometer and trip meter
• Compatible with all 95-03 OEM sensors and most aftermarket sensors
• Matching tachometer PART #s 2211-0031, 2211-0032 or 2211-0121, 2211-0122, 2211-0123, 2211-0124 (1.87") available separately

DRAG SPECIALTIES 140 MPH 1.87" White Face Programmable Mini Electronic Speedometer With Odometer/Trip Meter Polished

• Programmable with any sending unit that sends 3,000 - 90,000 pulses per mile
• Available in a polished or matte black finish in 1.87" or 2.4" diameter metal housing with a black or white gauge face
• Features a 12V LED backlit display
• Digital odometer has two resettable trip meters
• Remote single-button switch allows easy changing between odometer and trip meter
• Compatible with all 95-03 OEM sensors and most aftermarket sensors
• Matching tachometer PART #s 2211-0031, 2211-0032 or 2211-0121, 2211-0122, 2211-0123, 2211-0124 (1.87") available separately

DRAG SPECIALTIES Electronic Speedo/Tachometer, Harley 96-03 FX 96-03 FL

• Combination speedometer and tachometer
• Available with 120 mph or 220 km/h speedo and 8000 rpm tachometer
• Black face matches the stock gauge look
• LCD odometer, trip meter, all stock indicators including check engine light
• Plug-in installation for 99-03 models
• All 96-98 models require sub-wire harnesses; sold separately
• All 96-03 models require the use of a tachometer wiring kit; sold separately

DRAG SPECIALTIES Electronic Speedometer Speed Sensor Hole Plug, Chrome, Aluminum, specific application, Harley 95-13 FX 95-13 FL 95 - 03 XL

• Removing your OEM electronic speedometer or changing to a mechanical speedometer?
• This unique part from Don Hotop is designed to seal the speed sensor hole in all models that use an OEM electronic speedometer
• Manufactured from 6061 billet aluminum and brilliantly chrome plated
• Comes complete with O-ring and chrome-plated button head screw

Digital Ins Panel W/Spdo/Tach Requires Hb Mount & Pickup Sensor,Multifunction,Chrome

• This stylish high quality unit supplies all the functions you need
• Designed with a bar graph style tachometer
• Utilizes a LCD to display odometer and trip odometer mileage
• Speedometer calibration is simple with step by step instructions provided
• Requires separate handlebar mount and speedometer pickup sensor
• Other functions include:
  • Oil pressure warning light
  • High beam indicator
  • Neutral light
  • Turn signal indicators
  V-FACTOR
  Chrome Plated Speedometer/Tachometer
  (Imported)

Speedometer W/Lcd Odometer Fits Cable Dr Models Thru 1995 W/Fat Bob Dash,Mph Or Kph

• These custom speedometers include an LCD display odometer/tripometer
• Your choice of speedometer or speedometer with tachometer
• Unique design allows you to adjust speedometer for KMH to MPH
• Also settings for 1 to 1 ratio, 2 to 1 ratio or 2240:60 to 1 ratio
• These adjustments are made with an included push button
• Designed for use with a 16mm cable nut

V-FACTOR
Speedometer
Fits cable drive models through 1995
(Imported)

Oe Style Elec Speedometer Mph All Flst & Fxst Models 96/98 Rpls Hd# 67027-96A

• 120 MPH face
• Includes speedometer back clamp

V-FACTOR
Fits LST & XST models 1996/1998
Replaces HD# 67027-96A
(Imported)

Electronic Spdo, 2 5/8" Dia Custom App,Uw Oe Pickup Sensor Black Face W/White Numbers

• Single function MPH 12 volt speedometers for use with OE type transmission mounted pick-up sensor. Alternate triggered sensors can be found in the control section
• Housing measures 1.700 long and has a 2 3/8 O.D. (2 5/8 trim ring O.D.)
• The removable handlebar clamp fits bars as large as 1 1/4 O.D. or as small as 3/4 O.D. if used with the included rubber reducers
• 140 MPH face back lit with LED light
• Waterproof housing that is vibration resistant
• Includes 26 lead wire and instructions

Note: Use our recalibration module 48629 if required. V-FACTOR
Stainless Steel Gauge with Chrome Plated Bracket
Illuminated Black ace with white numbersbr>(Imported)

Speedometer,Elec-Autometer Cus App 2 5/8" Dia,Chrome Dial W/Cp Bezel/Cup Lcd Odo .19342

• 2 ⁵/₈ O.D. speedometers are designed for use with our custom brackets found in the control section
• eatures through the numbers cobalt blue lighting with an illuminated needle
• Can be used with the OE sending unit or an aftermarket sending unit and does not require a recalibration module
• LCD odometer with separate tripometer which can be set to display miles or kilometers
• Accumulated hours in use will be shown for 3 seconds on the LCD readout after the speedometer is powered up
• Instructions are included

Pro-Cycle by Auto Meter
Chrome Plated with Chrome ace

Spdo,1 7/8"Mini 2:1 Wh Face Bt 36/67 Fx,Fxr 73/90 Spt54/90 Trn Dr/Fr Whl Ss Case/Mtg Hrdw

• Encased in all stainless steel body that's 1 ⁷/₈ O.D. x 1 ³/₄ long with a 2 ¹/₈ O.D. x ¹/₄ thick bezel
• A glass lens covers a 1 ⁵/₈ 140 MPH face
• Illuminated with a 12 volt bulb and includes two feet of lead wire
• Includes mounting bracket with ⁵/₁₆ mounting hole and installation instructions
• See the control section for speedometer cables with 12 mm top nut

V-FACTOR
Stainless Steel with White ace
Fits transmission drive L 1947/1967, front wheel drive L, X, FXR & Sportster 1981/1984 (except Softail & XWG)
(Imported)

Spdo,1 7/8"Mini 2:1 Blk Face Bt 36/67 Fx,Fxr 73/90 Spt54/90 Trn Dr/Fr Whl Ss Case/Mtg Hrdw

• Encased in all stainless steel body that's 1 ⁷/₈ O.D. x 1 ³/₄ long with a 2 ¹/₈ O.D. x ¹/₄ thick bezel
• A glass lens covers a 1 ⁵/₈ 140 MPH face
• Illuminated with a 12 volt bulb and includes two feet of lead wire
• Includes mounting bracket with ⁵/₁₆ mounting hole and installation instructions
• See the control section for speedometer cables with 12 mm top nut

V-FACTOR
Stainless Steel with Black ace
Fits transmission drive L 1947/1967, front wheel drive L, X, FXR & Sportster 1981/1984 (except Softail & XWG)
(Imported)

Speedometer,Fatbob 89/L* Face Fxwg 84/L Softail 84/90 2240:60 Ratio Uw/Fr Whl Drive

• Fits all at Bob instrument panels with dash mounted speedometers
• Includes rubber damper, light with wire and mounting kit
• Designed for use with 12 mm speedometer cable nut
• Requires 48244 tripometer reset knob (not included)

V-FACTOR
1989/Later ace
Fits XWG 1984/1986, Softail 1984/1990 without self-cancelling turn signals
(Imported)

Speedometer,Fatbob 68/84 Face 2240:60 Ratio Fxwg 84/86 Softail 84/90 W/Fr Whl Drive

• Fits all at Bob instrument panels with dash mounted speedometers
• Includes rubber damper, light with wire and mounting kit
• Designed for use with 12 mm speedometer cable nut
• Requires 48244 tripometer reset knob (not included)

V-FACTOR
1968/1984 ace
Fits XWG 1984/1986, Softail 1984/1990 without self-cancelling turn signals
(Imported)

Speedometer, Mini 1:1 Ratio All 1:1 Ratio Trans Drive Complete W/Clamp

• Chrome Plated reinforced handlebar clamp with a rubber insulator to minimize vibration
• Designed to fit most bikes with stock length forks without any adapters or modifications
• Instrument measures 2 ⁵/₈ O.D. by 2 ¹/₁₆ deep
• 140 MPH face

V-FACTOR
Stainless Steel Gauge with Chrome Plated Clamp & 1:1 Ratio
or transmission drives
No cable included, (Imported)