Top End Tools

V-Twin Manufacturing Cylinder stud removal tool allows for removal by locking onto stud - Sold Each
Cylinder Extracting Tool The cylinder stud removal tool allows for removal by locking onto stud. Fits: FXST 1984-1998 FLST 1986-1998 FXD 1991-1998 FLT 1984-1998 FXR 1984-1994 XL 1986-UP UOM: 1

V-Twin Manufacturing 3" 3-3-16" Cylinder Flex Hone - Sold Each
Cylinder Wall Flex Hone features silicone carbide globules which allow the deglazing of Cylinders 3 to 4 1/4 when powered by a 3/8 or larger drill,180 Grit. Bore: 3 3/16

Rocker Shaft Bushing Bt 66/L* XL 57/L* Rpls.Hd#17428-57
V-FACTOR
Rocker Arm Bushing
Fits Shovelhead 1966/1984, Big Twin Evolution 1984/1999, Twin Cam all years, Evolution Sportster all years
Replaces HD# 17428-57
(Imported)

Exhaust Stud Drill Plate Tool Bt Evo Tc88 Spt Evo All Yrs* Guides & Aligns Drill Bit.1705

• Designed to guide and keep alignment of the included ¹/₄ drill bit in order to drill out a broken exhaust stud
• ollow up the drilling process with a tap and you are ready to install a new exhaust stud
• CNC machined from billet aluminum and anodized to protect the finish
• Hardened drill bushing to prevent the drill bit from damaging the main body
• Can be used without removing the head on any stud with the proper frame clearance
• Instructions included

Jims
or all Evolution models & Twin Cam

V-Twin Manufacturing FXST Rear Intake Valve Spring Comp Tool - Sold Each
Rear Intake Valve Spring Compressor. Compresses intake valve spring on the rear Cylinder of the ST so the rocker box can be removed while the engine is still in the frame. It does this without damage to the valve stem, valve sprin

V-Twin Manufacturing Replica Valve Spring Compressor 36-84 - Sold Each
Valve Spring Compressors Factory style replaces 96600-36 for all Big Twins OHV. Fits /Brand/ Fits: 1936-84 Replica BT

V-Twin Manufacturing Sifton Teflon Valve Guide Seals, 4 Piece, 1948-84 Sifton - Set

Sifton teflon valve stem seal, 4 piece, machining required

FL 1948-1984
FX 1971-1984
FLT 1979-1983
FXR 1982-1983

LANG TOOLS 12mm Spark Plug Rethreader, Black, made in the usa, Each

• Used to clean up dirty or damaged spark plug threads on Twin Cam, V-Rod and some Sportster models
• Consists of a special 12mm spark plug thread with a lead in (for proper alignment) and flutes (for dirt and chip relief)
• Also features a 5/8" hexagon with O-ring and female 3/8" square drive; requires the use of a 5/8" spark plug socket, or the female square requires the use of a male 3/8" square drive
• Special 12mm spark plug thread ensures proper engagement

LANG TOOLS Lower Rocker Box Wrench, Harley 94-00 FX 94-99 FL 94 - 94 XL

• Extra-long reversible ratcheting wrench is used to install/remove the lower rocker box
• A special 7/16" socket protrudes out of the wrench to reach the application
• Vinyl grip provides a comfortable, ergonomic grip and prevents the wrench from scratching or marring the bike

LANG TOOLS Replacement Bits For Rocker Box Cover Ratcheting Wrench, 3-Pack, size 3/16"

• To install and remove rocker box covers
• 93/4" long chrome-plated single-end reversible wrench has a 1/4" drive and 3/16" replaceable Allen bit end
• Low profile to allow clearance between frame and engine
• Comfortable, ergonomic vinyl grip
• Vinyl will not scratch chrome or paint
• Replacement bits also available
• Made in the U.S.A.

LANG TOOLS Cylinder Sleeve Hold-Down, Silver, Zinc-plated, made in the usa, 4-Pack, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

• Specialty nuts are used to hold down cylinder sleeves during service
• Allow motor to be turned over with heads off
• Nuts fit 3/8"-16 UNC thread
• Feature 3/4" hexagon with a small cylinder protruding down to catch the cylinder stud
• Case-hardened and zinc-plated
• Sold in packs of four

LANG TOOLS Rocker Box Cover Bolt Ratcheting Wrench, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

• To install and remove rocker box covers
• 93/4" long chrome-plated single-end reversible wrench has a 1/4" drive and 3/16" replaceable Allen bit end
• Low profile to allow clearance between frame and engine
• Comfortable, ergonomic vinyl grip
• Vinyl will not scratch chrome or paint
• Replacement bits also available
• Made in the U.S.A.

FEULING OIL PUMP CORP. Pushrod Tube Holder Tool, Black, made in the usa, Each

• Makes for easy adjustment of adjustable pushrods, holding pushrod tubes up and out of the way
• Sold each
• Made in the U.S.A.

MOTION PRO Tappet Screen Plug Tool, Black, Each

• Compact design
• O-ring on drive retains tool in 7/16" wrench or socket
• 7/16" drive allows more rotation without contacting motor
• Flange design allows downward force to be applied to tool

Piston Wrist Pin Remover All Models, All Years Simplifys Removal Jims.1276
With this tool one person can easily remove the connecting rods wrist pin from the piston with no fear of damage to the wrist pin bushing, connecting rod or the piston.Jims
Fits all models, all years
Replaces HD# 42320

Engine Tool,Cyl Head Holder 12 & 14Mm S.Plug Mt In Bench Vice Any Pos. Pingel .62082

• Mounts in any bench vise in any position and holds the cylinder head securely in place for all types of head work
• 10 long tool offers 12mm threads on one end and 14mm threads on the other end
• The hex portion of the shaft of the tool is also drilled for clean and easy wall storage

Pingel
Steel and Zinc Plated

Torque Plates Twin Cam 88 & 96 3.75"-3.875" Jims 951
Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminum cylinders. They easily adapt to conventional boring bars or a Sunnen type honing machine. These plates are drilled precisely for multiple applications use and can accommodate various bore sizes, with stock or oversize big bores. Kits are laser lettered for ease of use with torquing sequence and most sets don't require removal of ring dowels. Refer to chart for sizes and applications available.Jims
Use on Twin Cam 88, 96 with OEM bolt pattern, 1999/Later
Bore size 3.75 - 3.875

Valve Spring Compressor Tool Bt Ohv 1936/L* Spt 1957/L* Replaces Hd 96600-36B
Made for the longer valve and spring combination of the Evolution but will still work on all early Big Twin and Ironhead Sportster modelsJims
Black Wrinkle Powder Coated
Works on all Big Twin & Sportster heads, all years
Replaces HD# 96600-36B

Engine Tool,Universal Driver Use W/60724-60819-35100-57905 60793-60749-61750-60747-60748

• Used with many of Jim's tools
• Sold separately to decrease your tool costs
• The ¹/₂ O.D. pilot includes an O ring to hold the installed tool in place

Jims
eatures a knurled 1 O.D. grip & is a total of 12 long

Engine Tool,Lock Ring Tool Sh 83/L Bt Evo 84/L Spt L85/L* Install Only Rpls Hd 34623A
Used to install round wire piston pin lock rings like 65196. Lock ring not included.Jims
Used on Shovelhead 1983/Later, Big Twin Evolution & all Sportster Late 1958/Later
Replaces HD# 34623A

Engine Tool,Valve Guide Driver All Models W/5/16,11/32 & 3/8" Id Valve Guides.....Jims.1001
Jims
Three piece set fits ⁵/₁₆, ¹¹/₃₂ and ³/₈ I.D. value guides
or use on Big Twin, Sportster and 45ci, with shouldered type valve guides

Tappet Block Alignment Tool Sh Bt Evo Late 77/L Use Two For Perfect Job..Jims 33443-84

• Tapered shank is designed to provide perfect alignment with the threads
• Use two to insure proper alignment

Jims
Aligns Big Twin Late 1976/1999 tappet block, all Evolution & Twin Cam lower rocker covers, cam support plate for Twin Cam models
Sold Each, Replaces HD# 33443

Alignment Tool With 1/4-20 Thd Fits Various Eng Applications See Catalog Fof Uses

• Tapered shank is designed to provide perfect alignment with the threads
• Use two to insure proper alignment

V-FACTOR
Aligns Big Twin Late 1976/1999 tappet block, all Evolution & Twin Cam lower rocker covers, cam support plate for Twin Cam models
Sold Each, Replaces HD# 33443
(Imported)

Engine Tool,Piston Pin Bushing All Models Except Twin Cam 88" Replaces Hd 95970-32A....Jims
Used to remove and install wrist pin bushings without removing rods from crankcase on all Harley-Davidson^® models (except Twin Cam). Includes a thrust bearing for smooth tool operation.Jims
or all Harley-Davidson^® models (except Twin Cam)
Replaces HD# 95970-32A

Pushrod Keeper Tool Cad All Ohv Mdls,Ex Spt 91/L Easy Removal/Install 08-0255

• Designed to compress the spring cover with one hand when removing or installing the retainer clip
• This is the most professional tool available for the type of service it performs
• 13 long for good leverage and made from steel for strength
• Rubber coated handles for comfort

Motion Pro
Fits all OHV models (except Sportster 1991/Later)
(Imported)

Rocker Arm Cover Wrench Cad Bt Evo Tc88,Spt Evo All Years 3/16"Allen,Vinyl Grip 08-0220

• Designed to improve access to the rear rocker cover allen bolts directly below the frame
• The stubby ³/₁₆ allen wrench is TIG welded to an 8 long handle for leverage
• A ³/₈ drive hole is provided for use with a torque wrench
• Comfortable rubber coated handle

Motion Pro
Cadmium Plated
Fits all Evolution models & Twin Cam
(Imported)

Engine Tool,Oil Screen Plug Bt L52/99(Ex Tc88) Tappet Plug W/Slot Clears Exh Pipe Mfg2233
No longer will it be necessary to remove the rear exhaust pipe to access the tappet oil filter plug to clean the screen. This tool squeezes in where other tools won't fit and will not damage the slotted access plug.Jims
or Big Twin Late 1952/1999 with OEM style slotted plug (except Twin Cam)

Eng Base Gasket By-Pass Insert Bt Spt Evo All Years* 2 Pigtail Insert & Instr

• If you have an Evolution with about 20,000 miles on it, you have a base gasket leak! The factory has tried to remedy this problem with at least four different styles of cylinder studs to no avail
• Eliminates top end drain back oil from even touching the base gasket
• or best results use with metal base gaskets
• Tap the cylinder in the top end oil drain back hole with the supplied aluminum tap and install the PigTail^® with about one inch left protruding to be inserted into the crankcase
• Can be easily removed for cylinder service
• Designed for OE style cylinders (not intented for big bore cylinders)
• Includes instructions

HARDWARE
Replacement pack of 2 PigTail^® Inserts only

V-Twin Manufacturing 57-Up XL Sprocket Shft Trning Tool - Sold Each
Shaft Turning Tool fits spline or taper on assembled motor and allows engine to be turned over by ratchet or impact driver. Sifton unless noted. Years/ Type: 1957-up XL, Spline