Transmission Tools

Motorcycle Transmission Tools from K and G Cycles!
49 products

49 products

Sold Out
Trn Seal Installation Tool BT 5 Spd 85/L* & Spt 91/05 Installs Main Seal,Rpl Hd41496
Mid-USA
$34.50
Sold Out
Belt Tension Gauge,Use To Check Tension On Secondary Belt Rpls 40006-85 Or 35381
Mid-USA
$28.50
Quick view
V-Twin Manufacturing Transmission Main Gear Nut Wrench
V-Twin Manufacturing
$82.65
Quick view
V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool
V-Twin Manufacturing
$73.38
Quick view
V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool
V-Twin Manufacturing
$43.93
Quick view
BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa
Belt Drives Ltd.
$43.95
Quick view
Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050
Mid-USA
$59.40
Quick view
Main Dr Gear & Bearing Tool BT 5 Spd Spt & Buell 5 Spd* R&R Gear & Brg Jims 35316-80
Mid-USA
$312.70
Quick view
Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84
Mid-USA
$306.00
Sold Out
Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256
Mid-USA
$131.10
Sold Out
Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005
Mid-USA
$83.80
Sold Out
Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316
Mid-USA
$38.20
Quick view
Primary Drive Lock Tool Touring Models 07/L* Jims 2312
Mid-USA
$71.40
Quick view
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315
Mid-USA
$68.10
Sold Out
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A
Mid-USA
$174.20
Quick view
Shifter Tool,Fork Align Gauge Big Twin 1936/Early 1979 Replaces Hd 96384-39
Mid-USA
$162.50
Quick view
Trans Pulley Nut Socket 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 989
Mid-USA
$239.60
Quick view
Trans Main Bearing Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 987
Mid-USA
$270.00
Quick view
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981
Mid-USA
$418.90
Quick view
Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189
Mid-USA
$106.05
Quick view
V-Twin Manufacturing Lower.Adjustable Reamer Clutch Rel.Shft.36-84BT
V-Twin Manufacturing
$79.67
Quick view
V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84
V-Twin Manufacturing
$162.27
Quick view
V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85
V-Twin Manufacturing
$200.93
Quick view
V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL
V-Twin Manufacturing
$32.60
Quick view
V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool
V-Twin Manufacturing
$295.61
Quick view
V-Twin Manufacturing BT Ms Browng Rce Tool JIMS
V-Twin Manufacturing
$289.12
Quick view
V-Twin Manufacturing Vt 5-Speed Trans Door Remover-Installer
V-Twin Manufacturing
$73.38
Quick view
V-Twin Manufacturing JIMS 5-Speed Trans Door Installer Only
V-Twin Manufacturing
$113.77
Quick view
V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer
V-Twin Manufacturing
$71.08
Quick view
V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT
V-Twin Manufacturing
$15.86
Quick view
V-Twin Manufacturing JIMS 85-Up 5-Speed Seal Tool
V-Twin Manufacturing
$121.84
Quick view
V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar
V-Twin Manufacturing
$44.50
Quick view
V-Twin Manufacturing JIMS Primary Locking Bar 5-Speed FLT-FXR
V-Twin Manufacturing
$43.75
Sold Out
V-Twin Manufacturing JIMS Primary Locking Bar 4-Speed BT,FXST 5-Speed
V-Twin Manufacturing
$44.50
Quick view
V-Twin Manufacturing JIMS 5-Speed Tran Cover Browng Rmvr+Installer
V-Twin Manufacturing
$638.88
V-Twin Manufacturing Transmission Main Gear Nut Wrench Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Transmission Main Gear Nut Wrench

VT-16-1261

$82.65

In Stock

Save $-82.65
/
Shipping calculated at checkout.
V-Twin Manufacturing Transmission Main Gear Nut Wrench - Sold Each
OEM No: 94141-10 This tool is used to remove the 2-1/4" hex nut from the main drive gear which secures the rear drive trans pulley. To be used with 1/2" drive ratchet. This tool is designed to remove and install the right handed nut that holds o
V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool

VT-16-0821

$73.38

In Stock

Save $-73.38
/
Shipping calculated at checkout.
V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool - Sold Each
Countershaft Sprocket Lock Nut Wrench features an extra long two piece design Inner collar which will retain wrench to nut. Fits 1936-up Big Twins, 1 7/8 hex, 4 and 5 speed models. Brand: V-Twin
V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool

VT-16-0118

$43.93

In Stock

Save $-43.93
/
Shipping calculated at checkout.
V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool - Sold Each
Clutch Drum Locking Tools for removing Clutch hub and motor nuts. Year/ Model: 1941-84 Big Twin
BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa Garage and Shop Belt Drives Ltd. - K and G Cycles
Belt Drives Ltd.

BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa

DS-38010240

$43.95

In Stock

Save $-43.95
/
Shipping calculated at checkout.
BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa
  • For use on all BDL open belt drive kits
  • Choose the appropriate side of the tool for your kit; one side is for open belt drives up to 06 models and the smaller, reverse side is for open belt drive kits for 07-16 models
  • Made in the U.S.A.
Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050

MID-70439

$59.40

In Stock

Save $-59.40
/
Shipping calculated at checkout.
Trn Stud Installation Tool Bt 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050
Use to easily install transmission mounting studs on Big Twins with solid mount transmissions. Features a ball bearing end on the jam stud that eliminates any possibility of stud damage. Can be used to install any 3/8-24 stud. Includes instructions. Jims
Installation Tool
Fits Big Twin 4 speed 1936/Later & Softail 5 speed 1986/1999
Main Dr Gear & Bearing Tool BT 5 Spd Spt & Buell 5 Spd* R&R Gear & Brg Jims 35316-80 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Dr Gear & Bearing Tool BT 5 Spd Spt & Buell 5 Spd* R&R Gear & Brg Jims 35316-80

MID-70438

$312.70

In Stock

Save $-312.70
/
Shipping calculated at checkout.
Main Dr Gear & Bearing Tool Bt 5 Spd Spt & Buell 5 Spd* R&R Gear & Brg Jims 35316-80
  • Removes and installs the main drive gear and bearing without removing the transmission case from the bike
  • Will not damage the bearing or main drive gear during installation
Jims
Use on Big Twin 1980/Later, Sportster & Buell® 1991/Later
Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84

MID-70434

$306.00

In Stock

Save $-306.00
/
Shipping calculated at checkout.
Mainshaft Brng Inner Race Tool Bt L84/L* Removes & Replaces Pressed On Race Jims 34902-84
  • Designed to remove and install the pressed-on bearing inner race on the transmission mainshaft
  • Works on the bike or on the work bench
Jims
Fits all Big Twin Late 1984/Later
Primary Drive Lock Tool Touring Models 07/L* Jims 2312 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Tool Touring Models 07/L* Jims 2312

MID-70411

$71.40

In Stock

Save $-71.40
/
Shipping calculated at checkout.
Primary Drive Lock Tool Touring Models 07/L* Jims 2312
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits Touring models 2007/Later 6 speeds
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315

MID-70410

$68.10

In Stock

Save $-68.10
/
Shipping calculated at checkout.
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits Dyna 2006/Later & XST 2007/Later 6 speeds
Shifter Tool,Fork Align Gauge Big Twin 1936/Early 1979 Replaces Hd 96384-39 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Shifter Tool,Fork Align Gauge Big Twin 1936/Early 1979 Replaces Hd 96384-39

MID-70413

$162.50

In Stock

Save $-162.50
/
Shipping calculated at checkout.
Shifter Tool,Fork Align Gauge Big Twin 1936/Early 1979 Replaces Hd 96384-39
  • This is a must have tool designed to be used any time the shifter top has been removed for any reason
  • This tool gauges off of the shifter drum and transfers the exact position of the shift forks in relation to the gears
Jims
Fits Big Twin 1936/Early 1979 with hand shift top or ratchet top transmission
Replaces HD# 96384-39
Trans Pulley Nut Socket 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 989 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trans Pulley Nut Socket 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 989

MID-70409

$239.60

In Stock

Save $-239.60
/
Shipping calculated at checkout.
Trans Pulley Nut Socket 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 989
  • Use to remove the larger 2 1/4 hex nut from the end of main drive gear, which secures the rear drive trans pulley
  • Very save and easy to use
  • Just thread on the inner support collar to end of mainshaft, place the socket over the collar with your favorite 1/2 drive tool and unthread (right hand thread) locknut
Jims
Use on all Dyna 2006/Later, FLHT & XST 2007
Trans Main Bearing Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 987 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trans Main Bearing Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 987

MID-70408

$270.00

In Stock

Save $-270.00
/
Shipping calculated at checkout.
Trans Main Bearing Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 987
  • Safely install a new bearing using hand tools
  • Job can be performed with the transmission still in the frame
  • Holds bearing square to Fits bore, eliminating any marring of the bearing bore
Jims
Main Bearing Installer Tool
or use on Dyna 2006/Later, L & XST 2007/Later
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981

MID-70406

$418.90

In Stock

Save $-418.90
/
Shipping calculated at checkout.
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981
  • Safely install a new or newly repaired main drive gear
  • Job can be performed with the transmission still in the frame
  • Holds the main drive gear square to Fits bearing bore, eliminating any marring of gear or bearings
Jims
Main Gear Installer Tool
or use on Dyna 2006/Later, L & XST 2007/Later
Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189

MID-70404

$106.05

In Stock

Save $-106.05
/
Shipping calculated at checkout.
Trn Shaft Installer Tool Bt 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189
  • Pulls the transmission shafts into the access door without the use of a hydraulic or arbor press
Jims
or use on Big Twin 5 Speed 1980/Later
V-Twin Manufacturing Lower.Adjustable Reamer Clutch Rel.Shft.36-84BT Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Lower.Adjustable Reamer Clutch Rel.Shft.36-84BT

VT-16-1801

$79.67

In Stock

Save $-79.67
/
Shipping calculated at checkout.
V-Twin Manufacturing Lower.Adjustable Reamer Clutch Rel.Shft.36-84BT - Sold Each
Adjustable Reamers use to fit I.D. on new bushings. Years /Fits: 1936-84 BT Clutch Release Shaft
V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84

VT-16-1799

$162.27

In Stock

Save $-162.27
/
Shipping calculated at checkout.
V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84 - Sold Each
Adjustable Reamers use to fit I.D. on new bushings. Years /Fits: 1936-84 BT-XL Kicker Shaft
V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85

VT-16-1798

$200.93

In Stock

Save $-200.93
/
Shipping calculated at checkout.
V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85 - Sold Each
Adjustable Reamers use to fit I.D. on new bushings. Years /Fits: 1941-85 BT Main Drive Gear
V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL

VT-16-1767

$32.60

In Stock

Save $-32.60
/
Shipping calculated at checkout.
V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL - Sold Each
Mainshaft/Drive Bearing Press Tools. Fits/ Press: 1991-up BT-XL Drive
V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool

VT-16-0994

$295.61

In Stock

Save $-295.61
/
Shipping calculated at checkout.
V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool - Sold Each
Jims 5-Speed Transmission Main Drive Gear Tools. Use 16-0994 to remove and install main drive gear and install main bearing. Use 16-0718 for remove main drive bearing. Both Tools can be used without removing transmission case. Use
V-Twin Manufacturing BT Ms Browng Rce Tool JIMS Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing BT Ms Browng Rce Tool JIMS

VT-16-0877

$289.12

In Stock

Save $-289.12
/
Shipping calculated at checkout.
V-Twin Manufacturing BT Ms Browng Rce Tool JIMS - Sold Each
Jims Big Twin Mainshaft Primary Bearing Race Remover & Installer for use on all 1984-up Big Twins, replaces 34902.
V-Twin Manufacturing Vt 5-Speed Trans Door Remover-Installer Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Vt 5-Speed Trans Door Remover-Installer

VT-16-0756

$73.38

In Stock

Save $-73.38
/
Shipping calculated at checkout.
V-Twin Manufacturing Vt 5-Speed Trans Door Remover-Installer - Sold Each
5-Speed Kicker Installation Tool. Save time when installing 5-speed kicker conversion units, because the complete trans does not have to be dismantled. Mainshaft & Clutch pak can remain in place. Reduces labor from 6 to 3 hours.
V-Twin Manufacturing JIMS 5-Speed Trans Door Installer Only Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing JIMS 5-Speed Trans Door Installer Only

VT-16-0731

$113.77

In Stock

Save $-113.77
/
Shipping calculated at checkout.
V-Twin Manufacturing JIMS 5-Speed Trans Door Installer Only - Sold Each
5-Speed Transmission Door Remover & Installer removes and replaces the door bearings Saves time as the complete transmission does not have to be dismounted allowing the mainshaft and countershaft clusters to remain in place for us
V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer

VT-16-0719

$71.08

In Stock

Save $-71.08
/
Shipping calculated at checkout.
V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer - Sold Each
Big Trans Stud Installer Tool for 1936-86 4 and 5-Speed Softail.
V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT

VT-16-0711

$15.86

In Stock

Save $-15.86
/
Shipping calculated at checkout.
V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT - Sold Each
Needle Bearing Bushing Race Press Tools. Fits /Item/ Use: 1970-up BT Bushing Cam
V-Twin Manufacturing JIMS 85-Up 5-Speed Seal Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing JIMS 85-Up 5-Speed Seal Tool

VT-16-0700

$121.84

In Stock

Save $-121.84
/
Shipping calculated at checkout.
V-Twin Manufacturing JIMS 85-Up 5-Speed Seal Tool - Sold Each
Big Twin Mainshaft Seal Remover & Installer replaces 95660-42. Use to install and remove main seal. This Tool will push seal in as flat and straight as possible to .050 below housing for a no leak fit. Years/ Speed: 1985-up 5
V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar

VT-16-0682

$44.50

In Stock

Save $-44.50
/
Shipping calculated at checkout.
V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar - Sold Each
Primary Locking Bars use to lock Primary for servicing. Use: 1991-up Sportster & Buell
V-Twin Manufacturing JIMS Primary Locking Bar 5-Speed FLT-FXR Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing JIMS Primary Locking Bar 5-Speed FLT-FXR

VT-16-0681

$43.75

In Stock

Save $-43.75
/
Shipping calculated at checkout.
V-Twin Manufacturing JIMS Primary Locking Bar 5-Speed FLT-FXR - Sold Each
JIMS Prim Lockng Bar 5-Speed FLT-FXR OEM No: 2317 Jims Primary locking bar Tool is used to lock the Primary for service work on FXR, FLT and FLHT models. Fits: FLT 1979-UP FXR 1982-1994 UOM: 1 - EA Coun
V-Twin Manufacturing JIMS 5-Speed Tran Cover Browng Rmvr+Installer Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing JIMS 5-Speed Tran Cover Browng Rmvr+Installer

VT-16-0672

$638.88

In Stock

Save $-638.88
/
Shipping calculated at checkout.
V-Twin Manufacturing JIMS 5-Speed Tran Cover Browng Rmvr+Installer - Sold Each
5-Speed Transmission Door Remover & Installer removes and replaces the door bearings Saves time as the complete transmission does not have to be dismounted allowing the mainshaft and countershaft clusters to remain in place for us