Motorcycle Turn Signal Related Hardware

V-Twin Manufacturing Motorcycle Turn Signal Front Support Mount - Sold Each

Support for the turn signal on the front of a XL models.

OEM: 68555-87

XL 1988-UP
FXR 1988-1994
FXD 1991-UP

V-Twin Manufacturing 4" Short Chrome Rear Directional Signal Mount Bar, 1974-84 FLH 1986-up - Sold Each

8-3/4" bracket chrome is constructed of formed and welded steel which offers the greatest strength against vibration.

FL 1974-1984
FLST 1986-UP
FLHR 1991-UP

V-Twin Manufacturing 39mm Chrome Turn Signal Clamp Kit - Set

Smooth clamp set chrome will mount custom or stock turn signals to fork tubes on 39mm front ends. Includes hardware.
Turn signals are unthreaded and are sold with 2 bolts, 2 spacers, and 2 nuts. Clamp set is equipped with an 8.5mm hole for accepting

V-Twin Manufacturing Short Length Rear Turn Signal Mount - PR

1-1/4" long rear turn signal threaded stud set.
Sold in a quantity of 2.

FXR 1987-1994

V-Twin Manufacturing Front Signal Mount Ball Stud - Set

Ball stud set is for front turn signal.
Sold in a quantity of 2.
OEM: 67822-88

XL 1988-UP
FXR 1988-1994
FXD 1991-UP

V-Twin Manufacturing FLH Turn Lamp Chrome Mounting Complete Kit, 1968-85 - Kit

Turn signal chrome mounting kit has clamp and mounting bolt included. Kit is necessary for mounting the turn signals below spotlamp unit.

OEM: 68519-68

FL 1968-1984

Tech Note:

Suggested to use with #31-3974 turn signal clamps

V-Twin Manufacturing Front Turn Signal Mount Stud-Spacer Kit - Kit

Stud and chrome spacer kit for the front turn signal.

OEM: 68528-77A

FX 1977-1984
XL 1977-1984

RSD Black Rear Strut Mounts For Turn Signals, Gloss, Harley 06-16 FX 04 - 16 XL

• CNC machined billet aluminum
• Mount RSD Tracker turn signals
• Available in gloss black and chrome
• Hardware included
• Sold in pairs
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Turn Signal Swivel Kit, Harley 88-16 FX 86-16 FL 88 - 16 XL

• Available in chrome or black
• Swivels are CNC-machined steel
• Replaces stock zinc swivel
• Sold as a set for both sides

DRAG SPECIALTIES Chrome Turn Signal Standoff, Harley 63-15 FL

• Available with a chrome or gloss black finish
• Designed for easy wire routing
• Sold each

DRAG SPECIALTIES Chrome Fine-Thread Turn Signal Mounting Studs, size 5/16"-24

• Chrome-plated hollow steel studs
• Mount to turn signals with internal threads
• Perfect for custom mounting, wires run internally through the studs
• Overall length is 3.886", spacer length is 1.560"
• Sold in pairs

DRAG SPECIALTIES Chrome Coarse-Thread Turn Signal Mounting Studs, size 5/16"-18

• Chrome-plated hollow steel studs
• Mount to turn signals with internal threads
• Perfect for custom mounting, wires run internally through the studs
• Overall length is 3.886", spacer length is 1.560"
• Sold in pairs

DRAG SPECIALTIES Black Turn Signal Swivel Kit, Harley 88-16 FX 86-16 FL 88 - 16 XL

• Available in chrome or black
• Swivels are CNC-machined steel
• Replaces stock zinc swivel
• Sold as a set for both sides

DRAG SPECIALTIES Black Short Turn Signal Fork Mounts, Gloss, Harley 87-07 FX 87 - 07 XL

• Move turn signal closer to the bike for a cleaner look
• Available in chrome or gloss black
• Spacers are included for installation on 49mm forks
• Sold in pairs

CHRIS PRODUCTS Black Nickel Rear Turn Signal Brackets, Each, Harley 00-13 FX

• Chrome or black nickel finish
• Direct OEM replacements
• Must purchase screw attachment PART #0104 (OEM #56104-94) to attach rear turn signal bracket PART #DS-280267
• Sold each

ARLEN NESS Chrome Custom Turn Signal Mounts, Natural, Harley 87-05 FX 87 - 16 XL

• Relocates turn signals off handlebars; brings them in close to triple trees
• Direct bolt-on to triple tree pinch bolts; mount on upper or lower tree
• Made of billet aluminum
• Sold in pairs

Front Bullet Ts Mounts,Chrome Touring Models 1996/2013 Will Not Fit Road King

• Give your Touring model the custom stripped-down look of the Street Glide^®
• These mounts replace the factory passing lamps and flat lens turn signal mounts and give the option of the sleek bullet turn signals found in the electric section

V-FACTOR
Chrome Mount Set
Fits Touring Models 1996/2013 (except Road King)
(Imported)

Marker Light Mount To Mirror Big Twin And Sportster 1973/L* Use W/Custom Dual Marker Light

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Optional Mount & Replacement Part
Chrome Plated Mirror Stem Mounts
Kit mounts marker lights to threaded portion of mirror stems under controls
Sold in pairs, (Imported)

Turn Signal Relocation Kit, Cp Fits 41Mm Fork Tubes Clamp W/ Hardware Chrome Plated

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Optional Mount & Replacement Part
Chrome Plated ork Tube Clamps/ront Mounts
Fits 41mm fork tubes
(Imported)

Turn Signal Relocation Kit, Cp Fits 39Mm Fork Tubes Clamp W/ Hardware Chrome Plated

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Optional Mount & Replacement Part
Chrome Plated ork Tube Clamps/ront Mounts
Fits 39mm fork tubes
(Imported)

Turn Signal Mount,Rr 8-1/4" Lg Fl 4Spd 74/84 Flst/C 86/06 Flt 91/06,Cp Stl,Rpls Hd 68510-74C

• Available in the standard 13 length as an OE style replacement when using saddlebags or the shorter 9 or 8 1/4 version that works great when the saddlebags have been removed
• See below for availability of construction (OE style die-cast aluminum or high mileage vibration resistant steel)

V-FACTOR
8 1/4 Chrome Plated Aluminum
5 7/8 ender Mount Width
Fits L 4 speed 1974/1984, LST/C 1986/2006 & FLT 1991/2006
Replaces HD# 68510-74C

Mount Kit Ts & Passing Light Bt 68/82 Chrome Plated Rpls Hd 68519-68 & 68795-68
This Turn Signal and Passing Light Mount is a quality reproduction of original equipment manufacturer's parts. Use with OE spotlight support bar or any 3/4 O.D. tube to mount turn signals or additional lighting to the front or rear of L models 1968/Later and custom use. Includes the cast turn signal mount used on Big Twin 1969/Later (Replaces HD# 68519-68) and the support bar clamp used on Big Twin 1968/1982 (Replaces HD# 68795-68)V-FACTOR
Chrome Plated Complete Kit
Replaces HD# 68518-68

Rear Turn Signal Mounts Fxstd 00/Later & Customs Chrome, Pair, Hd# 68821-00

• Die cast mount is an exact duplicate of the OEM part
• Sold in pairs

V-FACTOR
Optional Mount & Replacement Part
Rear Deuce style mounts
Turn Signal Mount Pair
Fits 2000/Later Deuce and 2002/Later Non-Touring models
Replaces HD# 68821-00
(Imported)

V-Twin Manufacturing Front Chrome Turn Signal Visors, 1986-up FLT - Set

Chrome front turn signal visor set

OEM: 67734-88T

FLT 1986-UP

V-Twin Manufacturing Front & Rear Chrome Turn Signal Visors, 1986-up FLT - Set

Turn signal set, chrome for rear application.

OEM: 67737-88T

FLT 1986-UP

V-Twin Manufacturing XL Rear Extended Turn Signal Mounting Hardware - Set

Turn signal extension set.

XL 1990-UP

Measurements:

Overall Length: 3.706"
Shortend Stud Length: .394"
Longer end Length: .846"

V-Twin Manufacturing End Nuts for Chrome Low Boyz Turn Signal Bar - Set

OE chrome turn signal bar end nuts.

OEM: 68424-89

All models

V-Twin Manufacturing Replacement Red Lens Set for Turn Signal 33-0597 - Set
Red lens set for Tombstone tail lamp assembly. Fits: Replacement application for tombstone tail lamp UOM: 2 - SET Country of Origin: Imported

V-Twin Manufacturing Bracket & Plug for Big Twin Flasher, 1970-81 FLH - Sold Each

Wiring flasher connector is 3 prong type with mounting bracket riveted on. Flasher connector includes bracket and plug.

All models