New products

• Modern version of an old school classic.
• 21" x 2.15" is a great choice when using any of our custom springers found in Section 3 (Front End) of our catalog.
• 3/4" sealed bearings.
• These wheels have no brake rotor flanges (show use only).
• Custom wheel spacers must be used, depending on your application.
• All Chrome.

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals

V-FACTOR
Black Front Tube Style Wheel
Single Flange
Tapered 3/4" Bearing
16 x 3.00 Size
Fits FLST 1984/1999

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals

V-FACTOR
Black Front Tube StyleWheel
Single Flange
Tapered 3/4" Bearing
16 x 3.00 Size
Fits FLST 1984/1999

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
* Black Front Tube Style Wheel
Dual Flange
Sealed Ball 3/4" Bearing
21 x 2.15 Size
Fits FXD 2000/2003 & XL 2000/2007

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
* Black Front Wheel
Dual Flange
Tapered 3/4" Bearing
21 x 2.15 Size
Fits FX & XL 1984/1999

Weight: 20.00

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
Black Front Tube Style Wheel
Single 5/16" Flange
Tapered 3/4" Bearing
21 x 2.15 Size
Fits FXST & FXDWG 1984/1999

• HighFlow synthetic media
• Pressure relief valve
• Anti-drain back vlve prevents dry starts
• Think shell prevents punctures
• Works with all oils
• QS 9000
• 5 Micron
• Eight, 8.4mm holes for maximum flow
• Dim: 3 1/2" Long, 3/4-16 Thread
• Top: 17mm Hex Nut
• Chrome
• Fits Milwaukee-Eight 2017/Later, Twin Cam 1999/2017
• Anti-drain back upgrade for the following models:
  • XL Models (except XR) 1984/Later, FXR 1982/1994. Softail 1984/1998, Touring Models 1980/1998, FLHR, FLT, & FLHT
• Rpls HD# 63798-99A, 63731-99A, 63813-90, 63796-77A, & 63805-80A filters

POWER HOUSE PERFORMANCE SYSTEMS®

• Extra plate clutch kit.
• Fits Big Twin 1990/1997 & XL 1991/Later.
• Includes 9 friction plates with race proven material on tempered steel cores.
• Starburst groove pattern for maximum heat dissipation and oil circulation.
• Includes 8 tempered steel drive plates.
• Pre-set stack height for easy installation.
• Includes 15% stronger diaphram spring.
• Remove OEM rivet plate.
• 15% more surface area than stock for high performance strokers.

V-FACTOR

Chrome Plated 14" Axle, 3/4" Diameter(Imported)

Dimension A - 14"

Dimension B - 12-2/4"

Chrome plated 4130 cold roll steel

Dimension A: 16"
Dimension B: 14-3/4"

• Designed to provide a minimalist Chopper look by eliminating the external cable and running a singe cable inside the handlebar.
• This is a pull type throttle, and is manufactured with needle bearing and ball bearing operation.
• A built in spring mechanism to return the throttle.
• For use with 1" I.D. handlebars.
• Must use 1" handlebar grips.
• Instructions included.

Jims camshaft needle bearing remover and installer tool is required for correct and accurate replacement of the camshaft inner needle bearing for M8 models. This tool holds tighter tolerances which allows for a more precise installation depth. *NOTE: This remover uses the Jims Style remover collet as well as Jims fine threaded installation driver. A new removal holes works as a window to let you see what you're doing while using the tool. 2017-UP FLT 2018-UP FLST 2018-UP FXST

Hayden Replacement Pad for Milwaukee-Eight®M6BT17-M8

High quality hardware kits by Gardner-Westcott are available in Straight Knurled Allen head and include all hardware as shown.

Big Twin with Rear Pulley or Rear Sprocket

• Used for rear drive train alignment
• CNC machined from billet aluminum with a polished circumference

For use with rotors and Pulleys with 2-1/4" ID

Kit has a 2:1 ratio speedometer and a wired base. Base comes with sockets and bulbs, and includes five post key switch with two keys.
Order cable separately.

FL 1948-1967
FX 1980-1983

• Cruise-Mate is an easy to use lever operated throttle assist.
• Once installed, Cruise-Mate is extremely reliable and easy to operate.
• To set the throttle, simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set.
• Flip lever back (toward rear of bike) and throttle returns to normal operation.
• When adjusted properly, the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency.
• It is not a cruise control and will not maintain speed when going uphill.
• All internal parts are made from Stainless Steel.
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds.
• Lifetime Guarantee.

Ironbraid
Black Cruise Assist
Fits all Harley-Davidson^® Models 1996/Later (except 2014/Later Touring Models)
By: IRONBRAID INC

• Cruise-Mate is an easy to use lever operated throttle assist.
• Once installed, Cruise-Mate is extremely reliable and easy to operate.
• To set the throttle, simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set.
• Flip lever back (toward rear of bike) and throttle returns to normal operation.
• When adjusted properly, the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency.
• It is not a cruise control and will not maintain speed when going uphill.
• All internal parts are made from Stainless Steel.
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds.
• Lifetime Guarantee.

Ironbraid
Chrome Cruise Assist
Fits all Harley-Davidson^® Models 1996/Later (except 2014/Later Touring Models)
By: IRONBRAID INC

• Fits most EFI Softail Models 2001/07
• Fits Most FLT Models 2001/07
• Replaces HD 61001-01

V-FACTOR DRAG PIPES FOR SOFTAIL MODELS 1986/2006

• Top quality drag pipes for models listed
• Chrome plated or black primer that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4" diameter in 40" length
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4" Chrome Plated Set
Fits Softail models 1986/2006

Not legal for sale or use in California, or on any pollution controlled vehicles.

PRIMARY DR GASKET & SEAL KIT TCFL MODELS 1999/2006

FOAMET MATERIAL

Housing Length 62.8"
Free Length 2.7"
RPLS HD #38667-00

• 1 1/4" O.D. provides a hefty look
• Dimpled at the switch area for use with any year handlebar controls.
• Knurled at the riser area to help prevent slippage
• Designed for risers that mount on 3 1/2" centers
• Drilled for internal wiring

V-FACTOR
Chrome Plated Ape Hanger Handlebars
12" rise
35" total width
10" center width
9" pullback

• 1 1/4" diameter for big look, 1" at riser mount
• Available in black
• 6" pull back
• Drilled for internal wiring

V-FACTOR
14" Black Jackknife Handlebars
Fits 1982/Later models, including Fly-By-Wire
34" Total Width, 15" Center Width

• 1 1/4" diameter for big look, 1" at riser mount
• Available in chrome or black
• 6" pull back
• Drilled for internal wiring

V-FACTOR
14" Chrome Jackknife Handlebars
Fits 1982/Later models, including Fly-By-Wire
34" Total Width, 15" Center Width

Jims fork cap installation tool 5821 for use on 49mm forks allows the installation of the fork tube caps on the motorcycle without removing other parts 2014-UP FLT 2006-2017 FXD