Rear 11.5" Motorcycle Rotors

Brake Disc,Drilled 11.5"Od Rr Fx 4Spd 81/86 Fxr 82/L,St84/91 Spt 79/91 Flhs 81/84 Fxwg81/86

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled 11 ¹/₂ O.D. & 2 I.D. Disc
C mount hole style & ³/₈ bolt size
Fits X, XWG Rear 1981/1986, FXR Rear 1982/1991*, FLHS Rear Late 1981/1984, Softail Rear 1984/1991*, Sportster Rear 1979/1991*
Replaces HD# 41789-79A
(Imported)
* Will also fit 1992/1999 models if our 57123 mounting hardware is used

Brake Disc,Solid 11.5" Od Rr Fx 4Spd 81/86 Fxr 82/L,St84/91 Spt 79/91 Flhs 81/84 Fxwg81/86

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Solid 11 ¹/₂ O.D. & 2 I.D. Disc
C mount hole style & ³/₈ bolt size
Fits X, XWG Rear 1981/1986, FXR Rear 1982/1991*, FLHS Rear Late 1981/1984, Softail Rear 1984/1991*, Sportster Rear 1979/1991*
Replaces HD# 41789-79A
(Imported)
* Will also fit 1992/1999 models if our 57123 mounting hardware is used

DRAG SPECIALTIES Stainless Steel Drilled Rear Brake Rotor, One-piece, diameter 11.5", Harley 86-99 FL

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

Brake Disc,Drilled 11-1/2"Od All Single/Dual Fr Disc 84/99 Exceeds Oem..Rpls Hd 44136-92

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled 11 ¹/₂ O.D & 2 I.D. Disc
D mount hole style & ⁵/₁₆ bolt size
Fits all single or dual disc front brakes 1984/1999
Replaces HD# 44136-92
(Imported)

V-Twin Manufacturing x-Spoke Rear Rotor, 11.5", Polished SS 00-up - Sold Each
X Polished Stainless Brake Rotors. Fits 2000-up, Rear

V-Twin Manufacturing 11-1/2" Rear Brake Disc 18 Spoke Style fits 2000-Up - Sold Each
11-1/2" Rear Brake Disc 18 Spoke Style Polished stainless steel rear 11-1/2" brake disc with 18-spoke design. Fits: FXST 2000-UP XL 2000-UP FLST 2000-UP FXD 2000-UP UOM: 1 - EA Country of Origin: I

V-Twin Manufacturing 5-Spoke Rear Rotor, 11.5", Polished SS, 00-up Wire - Sold Each
11.5" Dura Polished Stainless Rotors. Fits 2000-up, Rear, Bolt kit 9807-10 Wire, 9818-5 Cast

V-Twin Manufacturing Razor Rear Right Rotor,11.5",Polished SS 93-99 - Sold Each
Polished SS Razor Rotors features full stainless construction polished to high gloss, Rear - 11.5". Order screw set separately. Fits 1993-99, Right side, Screw set 9807-10, Countersunk holes.

DRAG SPECIALTIES Stainless Steel Drilled Rear Brake Rotor, One-piece, diameter 11.5", Harley 00-16 FX 00-16 FL 14 - 16 XL 02 - 07 VR

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

DRAG SPECIALTIES Stainless Steel Drilled Rear Brake Rotor, One-piece, diameter 11.5", Counter-Sunk Mounting Holes., Harley 81-91 FX 86-91 FL 79 - 91 XL

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

DRAG SPECIALTIES Stainless Steel Drilled Rear Brake Rotor, One-piece, diameter 11.5", Counter Bore Mounting Holes., Harley 92-99 FX 92-99 FL 92 - 99 XL

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

DRAG SPECIALTIES Stainless Steel Drilled Rear Brake Rotor, One-piece, diameter 11.5", Counter Bore Mounting Holes., Harley 08-16 FL

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

DRAG SPECIALTIES Stainless Steel Drilled Front Brake Rotor, One-piece, diameter 11.8", Harley 08-16 FL

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

DRAG SPECIALTIES Stainless Steel Drilled Front Brake Rotor, Counter Bore Mounting Holes., Notched For Speedo Drive., diameter 11.5", Harley 84-00 FX 84-99 FL 84 - 99 XL

• Ground finish
• Drilled for better heat dissipation and consistent braking in wet weather
• Designed for use with OEM calipers and most aftermarket calipers
• Sold each

DRAG SPECIALTIES Polished Zinc Finish Drilled Rear Brake Rotor, Counter-Sunk Mounting Holes., Silver, diameter 11.875", Harley 81-85 FL

• Available for most models at an affordable price
• Drilled for better heat dissipation and faster braking in wet weather
• Designed for use with OEM and most aftermarket calipers; sold each

DRAG SPECIALTIES Polished Stainless Steel Drilled Rear Brake Rotor, One-piece, Natural, diameter 11.8", Counter Bore Mounting Holes., Harley 08-16 FL

• Available for most models at an affordable price
• Drilled for better heat dissipation and faster braking in wet weather
• Designed for use with OEM and most aftermarket calipers; sold each

DRAG SPECIALTIES Polished Stainless Steel Drilled Rear Brake Rotor, One-piece, Natural, diameter 11.5", Harley 86-99 FL

• Available for most models at an affordable price
• Drilled for better heat dissipation and faster braking in wet weather
• Designed for use with OEM and most aftermarket calipers; sold each

DP BRAKES Rear Brake Rotor, Harley 08-16 FL

• Direct OEM replacement rotors
• Give improved feel, performance and stopping power
• Manufactured from high-quality 410 stainless steel
• 100% laser-cut for precise fitment
• High-quality blanchard-ground for precise flatness and an attractive finish
• Compatible with all brake pad compounds and aftermarket calipers
• The ideal combination with DP Brakes brake pads
• Made in the U.S.A.

DP BRAKES Rear Brake Rotor, diameter 11.5", Harley 00-16 FX 00-16 FL 00 - 16 XL 02 - 07 VR

• Direct OEM replacement rotors
• Give improved feel, performance and stopping power
• Manufactured from high-quality 410 stainless steel
• 100% laser-cut for precise fitment
• High-quality blanchard-ground for precise flatness and an attractive finish
• Compatible with all brake pad compounds and aftermarket calipers
• The ideal combination with DP Brakes brake pads
• Made in the U.S.A.

BRAKING Rear Brake Rotor, One-piece, Buell 03-07

• Superior materials provide unmatched friction, feel and heat dissipation
• Extensive racing experience combined with cutting-edge technology provides superior brake systems
• CAD/CAM laser process produces exceptionally light and stress-free rotors
• Heat-treated according to its mass, thickness and targeted use
• Diamond surface finish is applied for perfect symmetry, flatness and balance
• Provide maximum stopping power while remaining perfectly flat
• Design is covered by an international license
• Sold each

Brake Disc,Floating Ss,11.5"Od Bt,Spt 2000/L* Rear,Cp Center U/W Stock Mt Hrdw,Mfg #R47013

• Available in your choice of Satin Finish, Pro Polish or loating type
• Satin finish discs have a machined surface and are a good economical choice for OE replacement
• Pro Polish discs feature an exclusive ES^™ (extremely flat surface) finishing process that produces a mirror finish that has a near perfect flatness providing zero disc runout
• loating discs have a machined satin disc surface with a chrome plated mounting center. The two pieces are separated by spring loaded retention spacers that provide a rattle free self alignment function. The floating effect helps to eliminate disc warpage by not transferring heat to the center
• All discs are made from 420 stainless steel (SVS420JZ) that provides superior durability with excellent resistance to oxidation
• The discs longevity is achieved by a high frequency induction hardening process prior to the final surface finishing process
• Precision placement of holes provide improved heat dissipation, water dispersion and reduced unsprung weight
• Compatible with all types of brake pads including the OE type sintered metal, Kevlar^® or organic
• Can be used with the OE mounting hardware or our chrome plated hardware kits
• All discs are sold each

Russell
loating
See Miscellaneous Information for itment Chart
(Imported)

Chart:

Model & Year

Brake Disc,Drilled 3Spoke 11.5 St Dyna Fxr 92/99 Rr Stainless Stl Rpls Hd 41789-92
Spruce up your spoke, non-spoke or custom wheels with these custom 3 Spoke Directional Brake Discs. Machined from 420 stainless steel plate, these brake discs are heat treated for strength, wear resistance and hardness. Precision ground for trueness, these discs are drilled to reduce weight and provide cooling while reducing brake fade under extreme conditions. These discs have a unique style, increased friction coeffeciency and excellent wear characteristics.Brake Disc. 11 1/2 O.D. 2 I.D. 3/8 Mount hole style & bolt size. Fits Softail, Dyna, and FXR Rear 1992/1999. Note: Will also fit X, XST 1981/1991 rear and FXR 1982/1991 rear when used with 1992/Later hardware. (Imported)Note: Polishing or chrome plating will severely alter discs performance and is not recommended.

Drilled Brake Disc,Polished Ss Bt & Spt 84/L* Front,11.5"Od Rpls Hd 44136-92 & 44156-00

• DOT Approved
• Includes adapter ring that reduces I.D. to 2 for 1984/1999 models
• Made from 420 stainless steel with a low carbon content
• Drilled for lightweight, water dispersal & improved heat dissipation
• See below for availability of finishes
• Precision ground for maximum flatness
• Mounting hardware found in the wheel section

Note: Always install new brake pads with new brake discs to ensure maximum brake pad and disc life. See the wheel section for brake padsV-FACTOR
Front Brake Disc
Stainless Steel with Polished Finish
11 ¹/₂ O.D., 2.220 I.D. disc diamters
Mount hole style & bolt size: ⁵/₁₆
Fits Big Twin & Sportster 1984/Later with single or dual disc
Replaces HD# 44136-92 & 44156-00, (Imported)

Drilled Brake Disc,Satin Ss Bt 81/L* Rear (Ex Flt) Spt 79/L* Rear,11.5"Od

• DOT Approved
• Includes adapter ring that reduces I.D. to 2 for 1984/1999 models
• Made from 420 stainless steel with a low carbon content
• Drilled for lightweight, water dispersal & improved heat dissipation
• See below for availability of finishes
• Precision ground for maximum flatness
• Mounting hardware found in the wheel section

Note: Always install new brake pads with new brake discs to ensure maximum brake pad and disc life. See the wheel section for brake padsV-FACTOR
Rear Brake Disc
Stainless Steel with Satin Finish
11 ¹/₂ O.D., 2.220 I.D. disc diamters
Mount hole style & bolt size: ³/₈
Fits Big Twin 1981/Later (except FLT models) & Sportster 1979/Later
Replaces HD# 41789-92 & 41797-00
(Imported)

Drilled Brake Disc,Satin Ss Bt & Spt 84/L* Front,11.5"Od Rpls Hd 44136-92 & 44156-00

• DOT Approved
• Includes adapter ring that reduces I.D. to 2 for 1984/1999 models
• Made from 420 stainless steel with a low carbon content
• Drilled for lightweight, water dispersal & improved heat dissipation
• See below for availability of finishes
• Precision ground for maximum flatness
• Mounting hardware found in the wheel section

Note: Always install new brake pads with new brake discs to ensure maximum brake pad and disc life. See the wheel section for brake padsV-FACTOR
Front Brake Disc
Stainless Steel with Satin Finish
11 ¹/₂ O.D., 2.220 I.D. disc diamters
Mount hole style & bolt size: ⁵/₁₆
Fits Big Twin & Sportster 1984/Later with single or dual disc
Replaces HD# 44136-92 & 44156-00, (Imported)

Brake Disc,Drilled,Rear Flt 86/99,Stainless Steel 11.5" Od, Rpls Hd 40939-86A

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled Stainless 11 ¹/₂ O.D. Disc
mount hole style & ³/₈ bolt size
Fits FLT Rear 1986/1999
Replaces HD# 40939-86A
(Imported)

Brake Disc,Drilled Ss 11.5"Od All Mdls Rear 00/Later* Satin Rpls Hd 41797-00 R47007

• Available in your choice of Satin Finish, Pro Polish or loating type
• Satin finish discs have a machined surface and are a good economical choice for OE replacement
• Pro Polish discs feature an exclusive ES^™ (extremely flat surface) finishing process that produces a mirror finish that has a near perfect flatness providing zero disc runout
• loating discs have a machined satin disc surface with a chrome plated mounting center. The two pieces are separated by spring loaded retention spacers that provide a rattle free self alignment function. The floating effect helps to eliminate disc warpage by not transferring heat to the center
• All discs are made from 420 stainless steel (SVS420JZ) that provides superior durability with excellent resistance to oxidation
• The discs longevity is achieved by a high frequency induction hardening process prior to the final surface finishing process
• Precision placement of holes provide improved heat dissipation, water dispersion and reduced unsprung weight
• Compatible with all types of brake pads including the OE type sintered metal, Kevlar^® or organic
• Can be used with the OE mounting hardware or our chrome plated hardware kits
• All discs are sold each

Russell
Satin Finish
See Miscellaneous Information for itment Chart
(Imported)

Chart:

Model & Year

Brake Disc,Drilled Ss 11.5"Od Rr Bt Spt 92/99 (Ex Flt) Rpls 41789-92 Russell R47005

• Available in your choice of Satin Finish, Pro Polish or loating type
• Satin finish discs have a machined surface and are a good economical choice for OE replacement
• Pro Polish discs feature an exclusive ES^™ (extremely flat surface) finishing process that produces a mirror finish that has a near perfect flatness providing zero disc runout
• loating discs have a machined satin disc surface with a chrome plated mounting center. The two pieces are separated by spring loaded retention spacers that provide a rattle free self alignment function. The floating effect helps to eliminate disc warpage by not transferring heat to the center
• All discs are made from 420 stainless steel (SVS420JZ) that provides superior durability with excellent resistance to oxidation
• The discs longevity is achieved by a high frequency induction hardening process prior to the final surface finishing process
• Precision placement of holes provide improved heat dissipation, water dispersion and reduced unsprung weight
• Compatible with all types of brake pads including the OE type sintered metal, Kevlar^® or organic
• Can be used with the OE mounting hardware or our chrome plated hardware kits
• All discs are sold each

Russell
Satin Finish
See Miscellaneous Information for itment Chart
(Imported)

Chart:

Model & Year

Brake Disc,Drilled 11.5"Od Rr Fx Fxwg 81/86 Rxr 82/91 St 84/ 91 Spt 79/91 Flhs 81/84 Ss

• Available in your choice of Satin Finish, Pro Polish or loating type
• Satin finish discs have a machined surface and are a good economical choice for OE replacement
• Pro Polish discs feature an exclusive ES^™ (extremely flat surface) finishing process that produces a mirror finish that has a near perfect flatness providing zero disc runout
• loating discs have a machined satin disc surface with a chrome plated mounting center. The two pieces are separated by spring loaded retention spacers that provide a rattle free self alignment function. The floating effect helps to eliminate disc warpage by not transferring heat to the center
• All discs are made from 420 stainless steel (SVS420JZ) that provides superior durability with excellent resistance to oxidation
• The discs longevity is achieved by a high frequency induction hardening process prior to the final surface finishing process
• Precision placement of holes provide improved heat dissipation, water dispersion and reduced unsprung weight
• Compatible with all types of brake pads including the OE type sintered metal, Kevlar^® or organic
• Can be used with the OE mounting hardware or our chrome plated hardware kits
• All discs are sold each

Russell
Satin Finish
See Miscellaneous Information for itment Chart
(Imported)

Chart:

Model & Year

Brake Rotor, Drilled Ss 11.5" Rear Softail Dyna XL 00/L Touring 00/07 Rpls 41797-00

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled Stainless Steel 11.5 O.D. Disc
Fits Softail, Dyna & XL Rear 2000/Later, Touring Models Rear 2000/2007
Replaces HD# 41797-00
(Imported)

Brake Rotor, Drilled Ss 11.5" All Rear 92/99 Ss Rpls Hd 41789-92 Cntrbore

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled Stainless Steel 11.5 O.D. Disc
Fits rear disc for all models 1992/1999 (except FLT)
Replaces HD# 41789-92
(Imported)

Brake Rotor, Drilled Ss 11.5" Rear 81/91 Ss Rpls Hd 41789-79A Cntrsunk

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled Stainless Steel 11.5 O.D. Disc
Fits X, XWG Rear 1981/1986, FXR Rear 1982/1991*, FLHS Rear Late 1981/1984, Softail Rear 1984/1991*, Sportster Rear 1979/1991*
Replaces HD# 41789-79A
* Will also fit 1992/1999 models if our 57123 mounting hardware is used
(Imported)

V-Twin Manufacturing Drilled Rear Rotor, 11.5", Standard SS 93-99 FXST-FXR-FXDB XL - Sold Each

Standard stainless brake disc are compatible with all brake pads including sintered metal and OEM.

XL 1993-1999
FXST 1993-1999
FXR 1993-1994
FXDB 1993-1999
FLST 1993-1999

Tech Note:

Order #9807-10 bolt kit for cast o