Solenoids

Starter Part,Solenoid Boot Blk Big Twin 65/88 Spt 67/80 Rpls Hd 31444-65A & 31475-77
Starter solenoid boot meets and exceeds OEM specifications.V-FACTOR
Black Rubber Boot
Fits Big Twin 1965/1988 & Sportster 1967/1980
Replaces HD# 31444-65A & 31475-77
(Imported)

Starter Solenoid Plunger Boot All Models 1965/1988 Replaces Hd 31444-65A
V-FACTOR
Fits all models 1965/1988
Replaces HD# 31441-65A
(Imported)

S&S CYCLE Compression Release Silicone Solenoid Cap, Pair

• Available in electric or manual styles for S&S heads that accept compression releases
• Electric compression releases open when you press the start button and close when the button is released
• Manual compression releases are opened manually and close when the motor starts
• Kits include the required parts for installation
• For ease of installation and removal, a special socket can be purchased separately
• Not for use on OEM heads
• Made in the U.S.A.

Starter Solenoid Repair Kit Big Twin 91/06,Spt 81/Later* Rpls Hd 31604-91

• If you are experiencing starter problems and only hear a click when you push the starter button, you may not need to replace the whole starter assembly
• Chances are, you only need to replace the key solenoid parts that normally wear out
• Includes everything needed as shown
• Installation hints are included

V-FACTOR
Fits Big Twin models 1991/2006 & Sportster 1981/Later
Replaces HD# 31604-91
(Imported)

Starter Solenoid,Dual Bracket Bt 5 Spd 80/88(Ex Softail) Chrome,Rpls Hd 31526-81B

• Provide positive starter engagement under the most severe conditions
• Permanently sealed, moisture proof cases are used to prevent water damage
• Hardened steel plungers with high performance contact discs assure maximum durability
• High strength dielectric end caps prevent arcing and burn through
See below for availability of finishes

POWER HOUSE
Chrome Plated finish with Dual Bracket
Fits Big Twin 5 speed 1980/1988 (except Softail)
Replaces HD# 31526-81B

Starter Solenoid Repair Kit Big Twin 65/88,Sportster 67/80 Rpls Hd 71465-85T .100K-Ha989
V-FACTOR
Fits Big Twin 1965/1988 & Sportster 1967/1980
Replaces HD# 71465-85T
(Imported)

SPYKE Chrome Solenoid End Cover/Starter Button, 1.0kW, 2.0kW, 2.4kW, 2.6kW

• Machined from billet 6160 aluminum, then triple show-chrome plated
• Feature a unique internally adjustable actuator to maintain constant contact as parts wear
• Can be used as a primary or backup starter actuation system
• Fit Spyke starters only
• Made in the U.S.A.

SPYKE Chrome Solenoid End Cover/Starter Button

• Machined from billet 6160 aluminum, then triple show-chrome plated
• Feature a unique internally adjustable actuator to maintain constant contact as parts wear
• Can be used as a primary or backup starter actuation system
• Fit Spyke starters only
• Made in the U.S.A.

SPYKE Chrome Solenoid End Cover Starter Button, 1.2kW, 1.4kW

• Machined from billet 6160 aluminum, then triple show-chrome plated
• Feature a unique internally adjustable actuator to maintain constant contact as parts wear
• Can be used as a primary or backup starter actuation system
• Fit Spyke starters only
• Made in the U.S.A.

TERRY COMPONENTS Chrome Loaded Starter Solenoid Body, Natural

• Sold complete with solenoid, contacts, plunger with spring, solenoid cover and switch terminal all loaded in starter solenoid housing

STANDARD MOTOR PRODUCTS Starter Solenoid, made in the usa, Harley 71-88 FX 65-88 FL 67 - 80 XL

• Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc

STANDARD MOTOR PRODUCTS Starter Solenoid, Harley 82-88 FX 80-88 FL 87 - 88 XL

• Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc

DRAG SPECIALTIES Starter Solenoid Repair Kit, Harley 89-07 FX 89-08 FL 86 - 16 XL

• Kit contains contacts and gaskets to cover all models

DRAG SPECIALTIES Starter Solenoid Repair Kit, Harley 06-16 FX 07-16 FL

• Kit contains contacts and gaskets to cover all models

DRAG SPECIALTIES High-Performance Starter Solenoid, Zinc-plated, Natural, Each, specific application, Harley 71-88 FX 65-88 FL 67 - 80 XL

• Designed with extra current capacity for starting high-compression motors
• Recommended for use with Drag Specialties High Performance Starters
• Features zinc-plated case
• Copper terminals and hardened plunger
• Sealed cover for long life

Starter Sol Cvr W/Str Button Bt 89/06 & Most Aftermarket Starters, Chrome Plated

• Use with 1.2/1.4 k/watt starters
• Simple mechanical push button built into the starter solenoid end cover eliminates the handlebar button, relay and wires
• Does not affect the function of the handlebar button

V-FACTOR
Chrome Plated Original Style Cover
Fits Big Twin 1991/Later & most aftermarket starters
(Imported)

Pyramid Starter Solenoid Cover. With Button 89/06 & Most Aftermarket Starters,

• Use with 1.2/1.4 k/watt starters
• Simple mechanical push button built into the starter solenoid end cover eliminates the handlebar button, relay and wires
• Does not affect the function of the handlebar button

V-FACTOR
Chrome Plated Pyramid Style Cover
Fits Big Twin 1991/Later & most aftermarket starters
(Imported)

Starter Solenoid,Chrome Bt 4 Spd 65/86,St 84/88,Spt 67/80,Rpls Hd# 71743-77A

• Provide positive starter engagement under the most severe conditions
• Permanently sealed, moisture proof cases are used to prevent water damage
• Hardened steel plungers with high performance contact discs assure maximum durability
• High strength dielectric end caps prevent arcing and burn through
See below for availability of finishes

POWER HOUSE
Chrome Plated finish with Single Bracket
Fits Big Twin 4 speed 1965/1986, Softail 1984/1988, Sportster 1967/1980
Replaces HD# 71743-77A

Starter Part,Solenoid End Cvr Bt 4 Spd 65/86,Softails 84/88 Chrome Rpls Hd 31353-85T
Cover the body of that dull zinc plated or black painted OEM solenoid with the stamped steel body cover and the gray or black rubber solenoid boot with the die cast solenoid cover. Beatiful covers are a must for any good custom job. V-FACTOR
Chrome Plated End Cover
Fits Big Twin 4 speed 1965/1986 & Softail 1984/1988
Replaces HD# 31352-85T
(Imported)

V-Twin Manufacturing Solenoid Cover ONLY XL - Sold Each

Chrome solenoid end cover
Order roller boot separately.

FL 1965-1984
FX 1971-1984
XL 1967-1980
FXST 1984-1988
FLT 1979-1988
FLST 1986-1988
FXR 1982-1988

Tech Note:

Order #28-0117 roller boot

V-Twin Manufacturing Solenoid Repair Kit, 91-up Big Twin - Kit

Repair kit includes plunger assembly, springs, and contacts.

OEM: 31604-91

FXST 1991-UP
FLST 1991-UP
FLT 1991-UP
FXD 1991-UP

V-Twin Manufacturing Starter Solenoid, 1965-1988 - Sold Each
OEM No: 71469-69 Chrome starter solenoid. Fits: FXST 1984-1988 FL 1965-1984 FLH 1965-1984 XL 1967-1980 FX 1971-1984 FLST 1986-1988 UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing 5-Speed Starter Solenoid, Zinc, VT, 1979-88, FLT, 1982-88 FXR - Sold Each

Accel starter solenoid has a zinc finish.
Use 4-Speed style solenoid on 1984-1988 FXST 5-Speed models.
OEM: 31489-79

FLT 1979-1988
FXR 1982-1988