Tombstone-Style Motorcycle Taillights

Taillight/Lic Mt 12V Bulb Type Fxwg,Fxst 1980/1999 & Cus 7" Fat Bob Fdr Heavy Duty Mt Cp

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Complete Bulb type Kit with Heavy Duty Mount with slotted mounting hole for adjustment of angle (.120 thick)
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Taillight &Mount,Tombstone Kit All Model W/Fl Style Rear Fdr With 73/98 Tail Light Mount Cp
These Tombstone Taillight Kits include a mount kit that will simplify installation on the L style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157 or our 11801 dual contact incandescent bulb. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models.

Note: These taillights are not DOT apporved and should be used accordingly.V-FACTOR
Chrome Plated Bulb type Taillight with Mount Kit
Fits L style rear fenders 1973/1998
(Impoted)

Tombstone Taillight W/12V Bulb Fits Bt 47/54 & Custom Fenders Features Wrap-Around Lens,Cp

• A new version of an old standard
• The lens now covers more area and wraps around the base for a more visual taillight
• Available in your choice of bulb type (which uses a standard #1157 incandescent bulb found in the electrical section)
• Made from cast aluminum
• Includes rubber fender gasket, license mount and hardware
• Use with mount kit 13109 to adapt to 1973/1998 style rear fender

Note: These tailight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Bulb type Taillight
Fits Big Twin 1947/1954 & custom applications
Replaces HD# 68003-47T

Tombstone Taillight Asy Oem Big Twin 1947/1954 & Custom W/ 12V Bulb,Bracket & Gasket Cp
Available in your choice of the bulb type or the LED (light emitting diode) type. The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb. The LED type uses 45 red LEDs for the brake/taillight and three blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredible life span. The LEDs do not produce any power robbing heat and draw only 4.5 watts of power as opposed to the 29.4 watts of power that the incandescent bulb draws. These 12 volt taillights feature a die cast housing and include a rubber fender gasket. License mount and hardware is also included.

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Bulb type Tombstone Taillight Assemby only
Fits L style rear fenders 1973/1998, Big Twin 1947/1954 & custom applications
Replaces HD# 68003-47T
(Imported)