Twin Cam Tappets

JIMS Powerglide Steady Roll Tappet, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

JIMS Powerglide Steady Roll Tappet, size +.002", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL

• The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL

• Full-travel hydraulic lifters made from machined steel
• Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
• Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
• Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
• Available in oversize diameters
• Recommended for both strip and performance street engines
• Sold in a set of four
• Made in the U.S.A.

FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 84-00 FX 84-99 FL 86 - 94 XL

• Performance hydraulic roller lifters dyno developed and track tested
• CNC-machined and precision ground
• When used with Feuling oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides
• Extend life of top end valve gear
• Can also be used for OEM replacements
• Sold in a set of four
• Made in the U.S.A.

FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 91 - 03 XL Buell 94-99

• Performance hydraulic roller lifters dyno developed and track tested
• CNC-machined and precision ground
• When used with Feuling oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides
• Extend life of top end valve gear
• Can also be used for OEM replacements
• Sold in a set of four
• Made in the U.S.A.

JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
• Billet body
• Increased roller width
• Roller perpendicularity held to .0002"
• Hand-honed hydraulic unit cavity
• Dynamic load capacities increased over 30%
• Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
• Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
• Sold each
• Made in the U.S.A.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.0015", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• Full-travel hydraulic lifters made from machined steel
• Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
• Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
• Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
• Available in oversize diameters
• Recommended for both strip and performance street engines
• Sold in a set of four
• Made in the U.S.A.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.001", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• Full-travel hydraulic lifters made from machined steel
• Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
• Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
• Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
• Available in oversize diameters
• Recommended for both strip and performance street engines
• Sold in a set of four
• Made in the U.S.A.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• Full-travel hydraulic lifters made from machined steel
• Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
• Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
• Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
• Available in oversize diameters
• Recommended for both strip and performance street engines
• Sold in a set of four
• Made in the U.S.A.

FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Exhaust, Intake, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

• Performance hydraulic roller lifters dyno developed and track tested
• CNC-machined and precision ground
• When used with Feuling oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides
• Extend life of top end valve gear
• Can also be used for OEM replacements
• Sold in a set of four
• Made in the U.S.A.

S&S CYCLE Hydraulic Tappets, 4-Pack, specific application, Harley 84-00 FX 84-99 FL 86 - 94 XL

• Rollers have a larger-than-stock inner bearing race that reduces stress and increases axle life
• Each lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct operation
• Redesigned plunger assembly withstands forces associated with heavy-duty valve springs and pushrods typically used in high-performance applications
• Revised metering device precisely controls oil delivery to top end, ensuring rapid lifter pump-up and reducing possibility of oil starvation to bottom end
• Sold in set of four

Powerglide Steady Roll Tappet Twin Cam 99/L* & Spt 00/L* .002" Oversize

• High performance engines require high lift high performance camshafts
• This adds increased loads on the tappet rollers which can lead to failure
• If you have ever had roller bearings in the tappet disintegrate and damage your entire engine, you know what this upgrade can do for you
• These tappets eliminate the needle rollers and replace them with a special bronze alloy bushing, still utilizing the proven Jim's Powerglide^™ tappet assembly
• Sold each

Jims
+.002 O.D. Tappet
Fits Twin Cam 1999/Later & Sportster 2000/Later

Powerglide Steady Roll Tappet Twin Cam 99/L* & Spt 00/L* Standard Diameter

• High performance engines require high lift high performance camshafts
• This adds increased loads on the tappet rollers which can lead to failure
• If you have ever had roller bearings in the tappet disintegrate and damage your entire engine, you know what this upgrade can do for you
• These tappets eliminate the needle rollers and replace them with a special bronze alloy bushing, still utilizing the proven Jim's Powerglide^™ tappet assembly
• Sold each

Jims
.8425 STD O.D. Tappet
Fits Twin Cam 1999/Later & Sportster 2000/Later

Hydraulic Performance Tappet Twin Cam 99/L*,Spt 2000/L* Turns To Solid At High Rpms

• These performance tappets offer premium performance, strength and reliability at a reasonable price
• Made of high strength steel alloy and heat treated for strength and wear resistance
• The internal parts are machined to tolerances for long lasting use

POWER HOUSE
or higher spring pressures that demand slow leak down acts like solids at high RPMs
Fits Big Twin Evolution 1984/1999 & Sportster 1986/1990
Standard O.D.

Hydraulic Performance Tappet Twin Cam 99/L*,Spt 2000/L* Replaces Hd# 18538-99
POWER HOUSE
Style: OE Replacement
Fits Twin Cam 1999/Later & Sportster 2000/Later
Replaces HD# 18538-99

Tappet,Hyd Powerglide Big Axle Twin Cam 88 99/L*,Spt 2000/L* Std Od Replaces Hd 18538-99
Available in your choice of performance levels, Powerglide or Hydrosolid. The Powerglide Hydraulic Tappet Assembly is designed for the performance minded and is as close as possible to a solid lifter while still remaining a hydraulic liter. The Hydrosolid Hydraulic Tappet Assembly is the ultimate high performance/RPM tappet available. The Hydrosolid performs like a hydraulic tappet up to about 5500 RPM and then turns into a solid tappet. The second it turns into a solid tappet it adds about three to six more useable horsepower. Hydrosolids will not pump up and allow your valves to hit each other and can be used with hydraulic type or solid type cams. Std. O.D. .8425. Sold each.Powerglide Hydraulic. Fits Twin Cam 88 1999/Later & Sportster 2000/Later. .8425 STD.

Tappet,Hydrosolid Big Axle Twin Cam 88 99/L*,Spt 2000/L* Std Od Replaces Hd 18538-99
Available in your choice of performance levels, Powerglide or Hydrosolid. The Powerglide Hydraulic Tappet Assembly is designed for the performance minded and is as close as possible to a solid lifter while still remaining a hydraulic liter. The Hydrosolid Hydraulic Tappet Assembly is the ultimate high performance/RPM tappet available. The Hydrosolid performs like a hydraulic tappet up to about 5500 RPM and then turns into a solid tappet. The second it turns into a solid tappet it adds about three to six more useable horsepower. Hydrosolids will not pump up and allow your valves to hit each other and can be used with hydraulic type or solid type cams. Std. O.D. .8425. Sold each.Hydrosolid Hydraulic. Fits Twin Cam 88 1999/Later & Sportster 2000/Later. .8425 STD.

V-Twin Manufacturing Hydraulic Tappet fits 1999-Up for TC-88 and TC-96 engines - Sold Each
Sifton Hydraulic Tappet Sifton tappet is made of forged steel and has heavier springs installed. For TC-88 and TC-96 engines Fits: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP UOM: 1 - EA Coun

V-Twin Manufacturing Hydraulic Tappet fits 1999-Up For TC-88 and TC-96 engines - Sold Each
Sifton Hydraulic Tappet Sifton tappet is made of forged steel with an anti-pump design with heavier springs installed. For TC-88 and TC-96 engines. Fits: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP

V-Twin Manufacturing Elevator Lifter Set TC 88 Lifters - Kit

Raises the tappet top for better pushrod angle of travel for TC-88 engine.

FXST 1999-UP
FLST 1999-UP
FLT 1999-UP
FXD 1999-UP