XL Throttle Cables

Generator brush holder is for 2-brush generator, 6 volt type .

OEM: 30350-58

Generator brush holder is for 2-brush generator, 12 volt type.

OEM: 30350-66

• 12V "Super Coils" feature a unique look to match their high-tech performance and state-of-the-art reliability
• Eye-catching chrome, bright yellow and black colors
• Available for electronic ignitions
• Will not fit F.I. models or Twin Cam applications

• 15, 30, 40 or 50A versions available
• Sold each

• 15, 30, 40 or 50A versions available
• Sold each

• 15, 30, 40 or 50A versions available
• Sold each

• 15, 30, 40 or 50A versions available
• Sold each

• Feature encapsulated magnets in a reinforced steel shell
• Direct OEM replacements
• Heavy-duty rotor, PART #DS-195206, features a .476" reinforced center thickness

• Each meets or exceeds OEM specifications and features precise construction

• Each meets or exceeds OEM specifications and features precise construction

• Kits include stator, rotor, black rectifying voltage regulator and mounting hardware
• Made in the U.S.A.

• Designed for direct OEM replacements
• Made in the U.S.A.

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

• Provide 25A at idle and 40A continuously above 2800 rpm
• Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications
• Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions
• Custom-designed flanged seal spacer provides maximum support for the rotor
• Voltage regulator output is calibrated to 14.25V from idle on up
• Ideal for fuel-injected engines and bikes with overdrive-type transmissions
• Made in the U.S.A.

• Heavy-duty rotors feature a super thick hub and splines that eliminate cracks
• Precision-wound stator
• Includes a chrome regulator with OEM-style connectors

• 32A narrow rotor design converts an original single-phase system to a three-phase system on Evolution or S&S Evolution motors
• Digitally calibrated for optimum charging level over a wide temperature range
• Rugged billet aluminum regulator housing is highly polished for a custom look
• Self-temperature compensated to control heat and extend service life; over-temperature protection prevents catastrophic heat failure under severe operating conditions
• Highly efficient power conversion means more current at lower speeds for easy starting and extended battery life; more current is also available for operating EFI and other electronic accessories
• System reaches full charge at 550 to 650 rpm; factory system reaches full charge at 1000 rpm
• Designed for custom applications

• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• Increase starter performance by supplying maximum battery current to the starter motor
• Contain all battery cables to replace OEM cables
• Available in clear or black
• Made in the U.S.A.

• Increase starter performance by supplying maximum battery current to the starter motor
• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility
• Specially rated 125C, oil- and grease-resistant, ultra-flexible jacket guarantees excellent performance (available in clear or black)
• All cables manufactured with 1/4" terminal and 5/16" terminal
• Sold each
• Made in the U.S.A.

• Transfer more cranking power with the least amount of amperage drop
• Over 1,000 bare strands of copper covered with a special vinyl insulation that is covered by a synthetic thermo-rubber jacket
• Sealed and insulated black heat tubing is moisture-proof
• Made in the U.S.A.

• Available in Retro style with black with red inflec with red ends or solid color red or black w/ cloth cover
• 4-gauge cable with pure electrolytic-grade 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• 1/4" and 5/16" terminal ends
• Increase starter performance by providing maximum current to starter motor
• Sold each
• Made in the U.S.A.

• Available in Retro style with black with red inflec with red ends or solid color red or black w/ cloth cover
• 4-gauge cable with pure electrolytic-grade 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• 1/4" and 5/16" terminal ends
• Increase starter performance by providing maximum current to starter motor
• Sold each
• Made in the U.S.A.

• Increase starter performance by supplying maximum battery current to the starter motor
• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility
• Specially rated 125C, oil- and grease-resistant, ultra-flexible jacket guarantees excellent performance (available in clear or black)
• All cables manufactured with 1/4" terminal and 5/16" terminal
• Sold each
• Made in the U.S.A.

• Increase starter performance by supplying maximum battery current to the starter motor
• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility
• Specially rated 125C, oil- and grease-resistant, ultra-flexible jacket guarantees excellent performance (available in clear or black)
• All cables manufactured with 1/4" terminal and 5/16" terminal
• Sold each
• Made in the U.S.A.

• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• Increase starter performance by supplying maximum battery current to the starter motor
• Contain all battery cables to replace OEM cables
• Available in clear or black
• Made in the U.S.A.

• Increase starter performance by supplying maximum battery current to the starter motor
• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility
• Specially rated 125C, oil- and grease-resistant, ultra-flexible jacket guarantees excellent performance (available in clear or black)
• All cables manufactured with 1/4" terminal and 5/16" terminal
• Sold each
• Made in the U.S.A.