XL Throttle Cables

V-Twin Manufacturing Throttle Cable Set w-Black Vinyl Cover XL - Set

Generator brush holder is for 2-brush generator, 6 volt type .

OEM: 30350-58

EL 1936-1940
FL 1941-1957
VL 1930-1934
UL 1937-1948

V-Twin Manufacturing Throtle Cable Set w-Black Vinyl Cover +8 XL - Set

Generator brush holder is for 2-brush generator, 12 volt type.

OEM: 30350-66

XL 1958-1981
FL 1958-1969

V-Twin Manufacturing Barnett Black Throttle Cable, 1996-01 XL - Sold Each

Black handlebar plain switch housing accepts screw in throttle and idle cables.

FL 1973-1981
FX 1973-1981
XL 1973-1981

MAGNUM Black Pearl Alternative Length Throttle Cable, elbow 45, Push-in, length 34", travel 4 7/8", Harley 07 - 16 XL

• 12V "Super Coils" feature a unique look to match their high-tech performance and state-of-the-art reliability
• Eye-catching chrome, bright yellow and black colors
• Available for electronic ignitions
• Will not fit F.I. models or Twin Cam applications

LA CHOPPERS Replacement Black Vinyl/Stainless Throttle Cable, Harley 07 - 16 XL

• Each meets or exceeds OEM specifications and features precise construction

LA CHOPPERS Replacement Black Vinyl/Stainless Throttle Cable, Harley 07 - 16 XL

• Kits include stator, rotor, black rectifying voltage regulator and mounting hardware
• Made in the U.S.A.

LA CHOPPERS Replacement Black Vinyl/Stainless Throttle Cable, Harley 07 - 16 XL

• Designed for direct OEM replacements
• Made in the U.S.A.

MAGNUM Black Pearl Throttle Cable, elbow 45, Push-in, length 31 7/8", Harley 11 - 16 XL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

MAGNUM Black Pearl Throttle Cable, elbow 45, Push-in, length 30", Harley 04 - 16 XL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

MAGNUM BYO Build Your Own Black Vinyl Throttle Cable, elbow 45, Harley 96-16 FX 96-16 FL 96 - 16 XL

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

MAGNUM BYO Build Your Own Stainless Steel Throttle Cable, clearcoated, Natural, elbow 45, Braided, Harley 96-16 FX 96-16 FL 96 - 16 XL

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

BARNETT Stealth Series Throttle Cable, elbow 130, Harley 07 - 16 XL

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

BARNETT Stealth Series Throttle Cable, elbow 130, Harley 07 - 16 XL

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

BARNETT Stealth Series Throttle Cable, elbow 130, Harley 96 - 06 XL

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish
• All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

BARNETT Stainless Steel Throttle Cable, elbow 130, Harley 07 - 16 XL

• Provide 25A at idle and 40A continuously above 2800 rpm
• Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications
• Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions
• Custom-designed flanged seal spacer provides maximum support for the rotor
• Voltage regulator output is calibrated to 14.25V from idle on up
• Ideal for fuel-injected engines and bikes with overdrive-type transmissions
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 130, Harley 00 - 01 XL

• Heavy-duty rotors feature a super thick hub and splines that eliminate cracks
• Precision-wound stator
• Includes a chrome regulator with OEM-style connectors

BARNETT Black Vinyl Throttle Cable, elbow 130, Harley 07 - 16 XL

• 32A narrow rotor design converts an original single-phase system to a three-phase system on Evolution or S&S Evolution motors
• Digitally calibrated for optimum charging level over a wide temperature range
• Rugged billet aluminum regulator housing is highly polished for a custom look
• Self-temperature compensated to control heat and extend service life; over-temperature protection prevents catastrophic heat failure under severe operating conditions
• Highly efficient power conversion means more current at lower speeds for easy starting and extended battery life; more current is also available for operating EFI and other electronic accessories
• System reaches full charge at 550 to 650 rpm; factory system reaches full charge at 1000 rpm
• Designed for custom applications

BARNETT Black Vinyl Throttle Cable, elbow 130, Harley 00 - 01 XL

• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• Increase starter performance by supplying maximum battery current to the starter motor
• Contain all battery cables to replace OEM cables
• Available in clear or black
• Made in the U.S.A.

MAGNUM Alternative Length Polished Braided Stainless Throttle Cable, Natural, elbow 45, Push-in, length 34 3/4", travel 5 1/8", Harley 96 - 06 XL

• Increase starter performance by supplying maximum battery current to the starter motor
• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility
• Specially rated 125C, oil- and grease-resistant, ultra-flexible jacket guarantees excellent performance (available in clear or black)
• All cables manufactured with 1/4" terminal and 5/16" terminal
• Sold each
• Made in the U.S.A.

MAGNUM Black Pearl Throttle Cable, clearcoated, elbow 45, Push-in, length 28 3/4", made in the usa, Copper, travel 5 1/8", Harley 96 - 06 XL

• Available in Retro style with black with red inflec with red ends or solid color red or black w/ cloth cover
• 4-gauge cable with pure electrolytic-grade 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• 1/4" and 5/16" terminal ends
• Increase starter performance by providing maximum current to starter motor
• Sold each
• Made in the U.S.A.

MAGNUM Alternative Length Sterling Chromite II Throttle Cable, Natural, elbow 45, Push-in, length 40", Harley 07 - 16 XL

• Available in Retro style with black with red inflec with red ends or solid color red or black w/ cloth cover
• 4-gauge cable with pure electrolytic-grade 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• 1/4" and 5/16" terminal ends
• Increase starter performance by providing maximum current to starter motor
• Sold each
• Made in the U.S.A.

MAGNUM Sterling Chromite II Throttle Cable, Natural, elbow 45, Push-in, length 30", Harley 07 - 16 XL

• Increase starter performance by supplying maximum battery current to the starter motor
• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility
• Specially rated 125C, oil- and grease-resistant, ultra-flexible jacket guarantees excellent performance (available in clear or black)
• All cables manufactured with 1/4" terminal and 5/16" terminal
• Sold each
• Made in the U.S.A.

DRAG SPECIALTIES Braided Stainless Steel Throttle Cable, clearcoated, Natural, elbow 45, Push-in, length 30", Harley 07 - 16 XL

• 4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility
• Increase starter performance by supplying maximum battery current to the starter motor
• Contain all battery cables to replace OEM cables
• Available in clear or black
• Made in the U.S.A.

BARNETT Platinum Series Throttle Cable, elbow 130, Harley 96 - 06 XL

• Specifically designed for hard-starting, high-performance engines that need extra cranking power
• Radial grid technology delivers higher cranking amps and superior performance
• Special-absorbed glass-mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid; Acid Pack included
• Superior vibration-resistance and durability provides a long service life
• PART #2113-0275 features a convenient, one-piece foldable handle for easy installation
• PART #s 2113-0275, 2113-0276 and 2113-0277 feature new flush-mount terminal adapters that eliminate the need for spacers ensuring a secure, vibration-resistant and direct-path connection
• See HARDWARE, CHEMICALS AND TOOLS section for Drag Specialties/Hotop battery lift tool, sold separately

DRAG SPECIALTIES Black Vinyl Throttle Cable, Threaded, elbow 45, length 31 3/4", travel 4 3/8", Harley 86 - 87 XL
HARDWARE
Starter Shaft Shifter Collar
Fits Big Twin 1965/1969, Big Twin 1983/1988, Sportster 1967/1980, Belt Drive Classic 1982
Replaces HD# 31503-65

DRAG SPECIALTIES Black Vinyl Throttle Cable, Threaded, elbow 45, length 30", Harley 88 - 95 XL
V-FACTOR
Starter Drive Shift Lever
Fits Big Twin 1965/1982
Replaces HD# 314445-65
(Imported)

DRAG SPECIALTIES Black Vinyl Idle Cable, elbow 45, Push-in, length 31 3/4", Harley 96 - 98 XL
V-FACTOR
Chrome Plated Right Side Switch Housing Assembly
Includes button head mounting hardware with allen wrench and includes the thumb screw throttle lock assembly
Fits Big Twin & Sportster 1982/1995 (except models with radio controls)
(Imported)

DRAG SPECIALTIES Black Vinyl Throttle Cable, Push-in, elbow 45, length 30", Harley 96 - 03 XL
Blue Streak^® points and condensers have long been the standard of quality in the automotive industry and are now available for yourHarley-Davidson^® .Blue Streak
Includes Point Set & Condenser
Fits Big Twin 1970/Later & Sportster 1971/Later with Points Type Ignitions
Replaces HD# 32661-70 & 32726-30A

DRAG SPECIALTIES Black Vinyl Throttle Cable, elbow 45, Push-in, length 28 3/4", travel 5 1/8", Harley 96 - 06 XL
Tune-up kits include points set, condenser and cam grease capsule.HARDWARE
Fits Big Twin 1970/Early 1978 & Sportster 1971/Early 1978