All

Steel bushing set for use with kickstand pin features a brass plated finish. Set of two. 2007-2017 FXST 1989-UP XL

Kit includes chrome plated mounting hardware and rubber type extended peg for easier operation of kickstand. 2004-2006 XL

Kit includes chrome plated mounting hardware and rubber type extended peg for easier operation of kickstand. 2007-UP XL

Extension kit is black with bracket and hardware. 2007-UP XL 2007-UP XR

Chrome kickstand leg is stock length. 2009-UP XR 1200

Kickstand mount bracket. *NOTE: Does not fit FLHTKL models. 2017-UP FLH

Kickstand pad has a 4 diameter surface. Pad fits in saddlebag or tool pouch to support stand on soft pavement. 0-All models

Chrome kickstand wedge kit is used for lowering FLT models. 1981-1984 FLT 1985-2006 FLT 1981-1984 FLHT 1985-2006 FLHT 1981-1984 FLHR 1985-2006 FLHR 1981-1984 FLHS 1985-2006 FLHS

KLG spark plug patches can easily be ironed or sewn on. Sold as a pair. NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Klieg Newburgh patches can be ironed or sewn on. Sold as a pair NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Male end mount knuckle billet footpeg set features a black finish. 0-All models with female mounting block

Male end knuckle billet footpeg set features a chrome finish. 0-All models with female mounting block

Knuckle kick start pedal without shaft is made from billet aluminum and has a natural alloy finish. Custom application

Knuckle nut set like the original style used on 1936-1947 Knuckleheads in a chrome finish. 1936-1940 EL 1941-1947 FL

Knuckle nut set like the original style used on 1936-1947 Knuckleheads featuring cadmium plating. 1936-1940 EL 1941-1947 FL

Knuckle nut set like the original style used on 1936-1947 Knuckleheads in a parkerized finish. 1936-1940 EL 1941-1947 FL

Knucklehead breather stud kit includes stud with tube and end snoot. 1936-1947 EL 1941-1947 FL

V-Twin Knucklehead cam chest assembly kit includes internal Big Twin replacement type parts for years listed including a Sifton cam Replica cam cover and hardware. 1936-1936 EL

V-Twin Knucklehead cam chest assembly kit includes internal Big Twin replacement type parts for years listed including a Sifton cam Replica cam cover and hardware. 1936-1940 EL 1941-1947 FL

V-Twin Knucklehead cam chest assembly kit includes internal Big Twin replacement type parts for years listed including a Sifton cam replica finned cam cover for 61 and 74 engines and hardware. 1941-1947 EL 1941-1947 FL

Knucklehead Rocker Box Mount Tab Replacements include a set of two tabs made in a single mold casting.The tabs must be cut to size one long and one short and must be welded on. *NOTE: Holes are not drilled. After welding machining will be required to level mounting surface. 1936-1947 EL 1941-1947 FL

Motor case set features a blank number boss there are no serial numbers on the case. Sold with Bill of Sale only. Oil from top end returns through pushrod tubes. Does not return through cylinder base. Case accepts loose roller bearings on the sprocket and pinion shaft side. Case set required line lapping of the main case races. Order case race available separately. Case set is designed for replacement of the original cases. No serial numbers are provided with these case sets. A Bill of Sale will be issued for blank cases. Case sets do not include pinion and sprocket shaft races.
10-0110" Cam cover includes installed bushings and seal. For use on models with a side oiling pinion shaft. 1941-1947 FL 1937-1947 EL

74 motor case for knucklehead motors accurately cast and machined. Features a natural cast finish and a blank number boss. Manufacturer's Bill of Sale available upon request. Case set is designed for replacement of the original cases. No serial numbers are provided with these case sets. A Bill of Sale will be issued for blank cases. Case sets do not include pinion and sprocket shaft races. Case is made in Germany by Motortechnic and features the original detail in the casing. *NOTE: Numeral 7 stamped on rear motor mount halves to denote 74 cubic inch. Builder may stamp these n
10-0948" Features built in seal flange to give added support for alternator rotor. 1941-1947 FL

Knucklehead engine case set includes case bushings line lapped for standard size rollers. Oil from top end returns through pushrod tubes. Does not return through cylinder base. Case accepts loose roller bearings on the sprocket and pinion shaft side. Case set is designed for replacement of the original cases. No serial numbers are provided with these case sets. A Bill of Sale will be issued for blank cases. Case sets do not include pinion and sprocket shaft races. Use 2 gaskets when mounting the oil pump body for proper clearance. **NOTE: Numeral 7 stamped on rear motor mount h
10-0985" Sifton tappet screw kit includes screws and nuts. Screws are 1-9/16 long with 9/32 x 32 TPI. 1941-1947 FL

Knucklehead engine plaque measures 18 X 24 0-All

1936-1947 EL 1941-1947 FL

Set of 4 nuts used on 1936-1947 Knucklehead rocker cover return lines. 1936-1940 EL 1941-1947 FL

Keychain with detailed multi-piece take apart style Knucklehead engine design is 2 tall and heavy! 0-All

Knucklehead oil filter bracket attaches to the rear rocker box rear bolt for mounting cannister oil filter unit. 1936-1947 EL 1941-1947 FL