All

6 volt LED Spring Fork lamp insert is for use with the original Cycle Ray and replica V-Twin headlamps. Insert fits 6-1/2 stock Spring Fork head lamps. *NOTE: LED lamp has H-4 base to accept 3 prong lamp socket. Installer must connect 3 terminal block wires to original wiring. 12 LED bulbs are available separately. The original lens can also be re-ysed or replaced with a glass lens also available separately. 1937-1952 EL 1941-1948 FL

Spring Fork top triple tree without ears with 1/2 mount holes are constructed of cast steel and features a raw finish. Inline top triple tree fits stock or custom Spring Forks. 1/2 holes allows post risers to be installed using allen cap screws 1/2 x 20 or 1/2 x 13. *NOTE: Triple tree is machined from a forged part. Holes for fitting on fork is machined the rest of the surface area is as forged finish. 1929-1952 WL 1929-1957 G 1936-1940 EL 1938-1945 UL 1941-1945 FL

Rear spring fork legs only features a chrome finish and is for use on FXST models. Fork stem is oxidized due to the plating process. 1988-2006 FXSTS

Spring Fork riser kit includes 4 chrome glide style risers chrome inline tree and acorn stem. Inline custom tree includes riser set that bolts from underside of the tree. Bolts are hidden in top of the Spring Fork tubes. 1941-1945 EL 1941-1945 FL 1936-1945 UL 1936-1952 W

Spring Fork rocker bearing kit includes 2 spherical bearings 4 race bearings and 4 ball bearings. Ten piece kit. Includes two spherical bearings four race bearings and four collars. 1988-UP FXSTS 1997-UP FLSTS

Spring fork rocker stud set features a black finish with parkerized hardware. Set of four. Set includes 2 long with slot (OEM #45676-30) 1 short with tip (OEM #45674-30) and 1 short with slot (OEM #45675-30). For use on 45 Solo models with 3/8 axle and inside rockers. Bushings sold separately. 1936-1952 W

Spring Fork rod cross bar features original 1930's design and is detailed cast to fit under two acorn Spring Fork rod top nuts. Spring fork rod brace will fit custom and original spring fork rods. Cross bar is nickel plated steel. 1936-1952 W 1936-1957 G 1941-1948 FL

Rod nut set includes two hex nuts with attached acorn top nut for ease of installation in a chrome finish. Hex nut is covered by an acorn top nut why? Less cost than machining an acorn nut. This is a 4 piece kit. *NOTE: Includes 2 Replica acorn type nuts made exactly as the original 2 piece design with the cap pressed onto the nut and the spring retainer nuts. And 2 lower hex cadmium nuts with 7/16 -20 threads. 1936-1948 EL 1936-1952 WL 1936-1957 G 1937-1948 UL 1941-1948 FL

Rod nut set includes two hex nuts with attached acorn top nut for ease of installation parkerized as original! Hex nut is covered by an acorn top nut why? Less cost than machining an acorn nut. This is a 4 piece kit. *NOTE: Includes 2 Replica acorn type nuts made exactly as the original 2 piece design with the cap pressed onto the nut and the spring retainer nuts. And 2 lower hex cadmium nuts with 7/16 -20 threads. 1936-1948 EL 1936-1952 WL 1936-1957 G 1937-1948 UL 1941-1948 FL

Full rebuild kit for shackle bar for spring brake contains all parts needed to restore the front brake shackle assembly. 1941-1948 FL 1941-1948 EL 1941-1948 UL

Spring Fork shock features a black finish. 1988-2006 FXSTS

Spring Fork shock features a chrome finish. 1997-2006 FLSTS 2005-UP FLSTSC

Spring fork rods are zinc plated steel. Set includes two shock units to replace rods on front spring fork legs. Body is zinc plated and the rod/socket features a parkerized finish.

1937-1952 W
1941-1948 FL
1937-1957 G
1936-1948 EL
1937-1948 U

Spring Fork spotlamp assembly with clamps toggle switch 12 volt clear bulb and red lens. Mounts to ride control or shock assembly on Spring Forks. *NOTE: For show or decorative use only and are not D.O.T. approved. 1938-1940 EL 1941-1957 FL 1938-1947 UL 1938-1952 WL 1938-1957 G

Bracket for late style or aftermarket Guide brand spotlamps features a zinc finish. 1938-1948 UL 1938-1948 EL

Scissor style spring fork steering damper is parkerized. 1945-1948 FL 1945-1948 UL 1945-1952 WL 1945-1957 G

Spring Fork steering damper kit includes a damper handle kit fiber and spider washer. 1942-1957 G 1942-1948 FL 1942-1952 EL 1942-1952 W 1942-1952 U

Spring Fork stem neck race kit with ball bearings is for use with 7/8 stem. Kit includes stem cone nut clutch ball bearings 2 fork stem ball bearing races Spring Fork stem nut and bearing guard. Does not include races. NOTE: Order neck cups separately. 1936-1952 W 1936-1957 G

Black 6-1/2 headlamp assembly features the Spring Fork style and shape with a universal mount to fit all models. Complete assembly includes a diamond cut reflector 12 volt 60/55 watt H4 bulb and 5 watt parking light. ECE approved. Custom application

Chrome 6-1/2 headlamp assembly features the Spring Fork style and shape with a universal mount to fit all models. Complete assembly includes a diamond cut reflector 12 volt 60/55 watt H4 bulb and 5 watt parking light. ECE approved. Custom application

Spring Fork tree with riser kit features a chrome inline top tree with 4-1/2 offset dog bone risers. The risers are rubber mounted and accept 1/2 x 13 threaded bolts. 1936-1940 EL 1941-1945 FL 1929-1952 WL 1929-1957 G 1938-1948 UL

Spring Fork handlebar forging is for offset triple trees completely machined in raw finish. Use for Hellings and Stellings riser intstallation or for handlebar fabrication or repair. This is a raw forging accepting 1 bars which must be welded in place. Trecs have holes for cables and wires to exit. Restoration quality for V-Twin! Bar ends not included. *NOTE: The center to center distance is 4-3/4 . 1946-1948 EL 1946-1948 FL 1946-1948 U

Spring fork handlebar forging is inline triple trees completely machined in raw finish. Use for Hellings and Stellings riser installation or for handlebar fabrication or repair. This is a raw forging accepting 1 bars which must be welded in place. Trecs have holes for cables and wires to exit. Restoration quality for V-Twin! 1936-1945 EL 1936-1952 W 1936-1957 G 1941-1945 FL

Spring Fork triple tree kit is for inline forks with chrome components that include topinline tree T bar clamp and screws to attach risers. This will fit OE Wyatt Gatling and Paughco inline forks. Also included are a set of Riser Adapter Insert Set which may be screwed in the rear legs. Legs must be tapped 3/4 x 16 to accept these inserts. NOTE: Order top nut separately. 1936-1952 W 1941-1945 FL 1936-1957 G 1936-1945 EL

Raw Spring Fork front leg tube set is flatened and drilled for 7/8 as original! The flat face side goes to the inside. Note: Must be brazed into original forging. 1936-1952 W 1941-1948 FL 1936-1948 EL

Kit includes a black real leather Bates bobber solo seat and spring mount kit. 2004-2006 XL 2010-UP XL

Kit includes a black synthetic leather Bates bobber solo seat and spring mount kit. 2004-2006 XL 2010-UP XL

Kit includes a black Bates bobber solo seat and spring mount kit. 2004-2006 XL 2010-UP XL

Kit includes a Bates smooth leather solo seat and spring mount kit. 2004-2006 XL 2010-UP XL

Kit includes a black naugahyde Bates 1960 style solo spring saddle and spring mount kit. 2004-2006 XL 2010-UP XL