All

2 light dash lens kit includesa red lense holder and rubber bumper. This is a 3 piece kit. 1947-1961 FL 1947-1952 WL 1947-1948 UL

1 black handlebar with indents. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

2-1/4 Chrome straight muffler set includes black billet tips installed. Baffles are removable. Ends are straight cut to accept end cap. Removable baffles and black billet end caps included. Order inlet clamp set end clamp set and cross tube gaskets separately. Existing inlet clamps may be used with this installation. 2014-UP XL

Shock set will lower by 2-1/4 and features a gloss black finish. The inner diameter of the eye holes measures 1/2 . 2006-UP XL

Baffle pipe set fits inside drag pipes. Baffle is 10 long and fiberglass packing. Custom application for drag pipes.

Baffle pipe set fits inside drag pipes. 2-1/4 denotes the size of the pipe into which the baffle fit. Baffle is 8-1/4 long and the outer diameter of the baffle is 2.12 . The set comes in fiberglass packing. Custom

Pipe baffler fits inside straight pipe. Bafflers are like the original Snuff-or-Not which is a washer that can be turned to baffle position. *Baffler diameter denotes the size of the pipe into which it fits. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. Custom application for 2-1/4 drag pipes

Double barrel muffler set features 2 pipes on each side which are 2-1/2 outside diameter hot rod style with baffles. Set of two. Order clamps and baffles separately. Order replacement T-bolts separately if required. 1995-2016 FLT

Baffle pipe set fits inside drag pipes. 2-3/8 denotes the size of the pipe into which the baffle fit. Baffle is 8 long and the baffle outer diameter is 2.24 . The set comes in fiberglass packing. Custom

Generator gear features a parkerized finish for use with two-brush generators on Flathead Side Valve models with the built in oil slinger. For use on all 12 volt conversions on Side Valve 45 and Big Twin motors. *NOTE: Installation requires 5946W spacer 5/16 x 11/16 x 3/32 washer and 7725 lock nut which is not included. 1958-1973 G

2004-UP XL 883R, 883N and 1200N with EFI

Black Buffalo Ape Hanger 1-1/4 handlebar has a 20 rise with indents and wire holes. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

Chrome sissy bar kit includes a 20 sissy bar back and a set of detachable side plates. Detachable sissy bar side straps mount to the outside of the fender struts. 2004-UP XL

Sissy bar measures 20" high x 8-3/4" wide.
The bolt holes center to center measure 1-1/4" and the cross bar center to center measures 2".

FXST 1984-2005 except FXSTD
FLST 1986-2005
FL 1958-1984
XL 2004-UP with detachable sideplates
FXD 2006-2017 except FXDF, FXDFSE/2, 2010 FXDWG
FX 1980-1986

Chrome 20 megaphone slip on muffler includes end clamp fit 1-3/4 pipes and mount strap. Custom application

Chrome solid sissy bar kit includes a 20 sissy bar back and a set of non-detachable side plates. Rigid sissy bar side plates mount to the inside of the fender struts between the fender and struts. 2004-UP XL

20 Sissy bar back. 1991-2001 FXD 1982-1994 FXR 1982-2003 XL

Sissy bar measures 20 high x 8 wide. 1972-1985 FX

Sissy bar measures 20 high x 7-1/2 wide and accepts insert. 2004-UP XL with rigid side plates 2002-2005 FXD equipped with either rigid or detachable side plates

Center valve inner tube with metal stem. For use with 200/55R17 radial tires. 0-Rear

Our V-Twin 16 tire tube is manufactured with 100% natural rubber and meet OEM quality and performance. Center valve inner tube with metal stem. 0-Rear

2000 watt bulb 120 volt for fresnel tungsten lights. 0-All

20-50W Synthetic blend Spectro oil comes in a case 0-All models

Replacement wheel bearing for 25mm axle. For use on ABS and non ABS models. ABS models require one ABS bearing and one non ABS bearing. Designed for bikes with stock diameter or larger than stock diameter wheels. Bearings for larger than stock diameter wheels have a greater reinforced magnetic area that will not set off any engine codes after proper installation. Custom Application

1984-1999 FLT

Front 21 x 3.25 wheel assembly features a chrome hub with all internal bearings installed 40 spokes and a chrome rim laced and trued. NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1980-1983 FXWG

Features a Replica 21 x 2.15 drop center rim a chrome hub with 25mm bearings and 40 chrome spokes. Not ABS compatible. NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. NOTE: Non ABS. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2017 FXST 2007-2017 FXDWG

Features a Replica 21 x 2.15 drop center rim a chrome hub with 25mm bearings and 40 stainless spokes. NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2017 FXST 2007-2017 FXDWG

21 x 2.15 front wheel features a chrome finish and 40 spokes. 2011-2017 FLST with ABS 2011-2017 FXST with ABS 2011-2017 FXD with ABS

21 front wheel includes chrome rim spokes and hub. For use with 2015-up XL with ABS. 2015-UP XL with ABS