All

Linkert M51L 1-1/4 carburetor hardware kit includes all parts except brass body and throttle arm. This is for 1-1/4 bore linkert carburetors. 1937-1952 WL 1937-1952 WLA 1937-1952 WLC 1937-1952 WLD 1941-1948 U 1941-1952 WR

Linkert needle and seat kit. 1936-1952 EL 1941-1965 FL 1936-1952 W 1936-1957 G

Linkert needle valve lever and screw kit is for 1 carburetors and includes the brass needle valve lever with the bolt and spring. Kit includes a 7/8 venturi Linkert Needle Valve for 1 carburetors with screw kit Nylon Bushing kit for the throttle shaft Float Arm Assembly which includes an unsinkable M float one piece cast brass float arm the bolt pivot cap and pin set for mounts. Lever fits all 1 Linkert carburetors on M-2 M-4 M-5 M-6 M-7 M-8 M-11 M-12 M-16 M-17 and M-18 models. 1930-1936 RL 1932-1956 G

This M model float is our exclusive tooling for an exact Replica fit and function. Molded of nitrophyl material which is fuel resistant. NOTE: Includes bolt and nut to attach to float arm. This float will not leak or swell and is impervious to modern fuel. This is the same weight as the orginal and used the same settings. For use with all round-bowl series M Linkerts. Arm is not included. Includes genuine linkert M float. For the float arm installation the center prong of the float arm should have .003 of clearance in order for the arm and needle to move freely. *NOTE: Include
35-0748" Allows use of 22mm petcock in a fuel tank designed for Delphi fuel injection. Includes o-ring stock replacement for 2001-06 FXSTD 2006-06 FLT and 2004-06 FXST carburetor models. 1933-1934 VL 1936-1940 EL 1937-1948 UL 1941-1965 FL 1933-1952 WL

1/4 x 40 tap tool for Linkert carburetors. 1941-1965 FL

Linkert tear drop carb cover includes a chrome smooth die cast tear drop cover attaches by 3 screws to the steel. 1941-1965 FL 1941-1952 W

Linkert snap throttle kit is for use with 1 custom bars. This kit includes snap kit 1/4 fast throttle assembly grips cable and cable end. Original Flanders style replica of the 1940's. Originally designed to be used with the Hellings-Stellings handle bar conversion. The 1 handle bar conversion and rubber mounted Flanders risers allowed a vibration reduction alternative for the Spring Fork models of the 1940's. Snap throttle kit is for 1936-65 OHV conversion models with the brass linkert carburetors. Cable must be cut to length for each specific application. 1936-1952 EL 1941-1965 FL

Linkert throttle lever base is only for linkert 4 bolt model carburetors is cast as original. 1948-1965 FL 1948-1952 EL

Linkert thumb choke lever includes detent ball and spring. 1933-1952 W 1936-1952 EL 1930-1936 VL

This carburetor adapter is machined from billet stock with a natural finish. Allows the installation of the 40mm CV carburetor 4 bolt linkert to Big Twin manifold. For use with 40mm CV carburetors connected by rubber sleeve. *NOTE: Rubber sleeve and clamp not included must order separately. 1936-1953 EL 1941-1965 FL

Linkert tool kit includes 6 special drills with brass knurled handles 1 idle shot tool and 1 venturi tool for use on brass linkert carburetor bodies all years. Kit includes 6 drill pivots and 1 idle slot tool blade. Drill bit sizes include #55 (1.3mm) #53 (1.5mm) #56 (1.2mm) #42 (2.3mm) #72 (0.6mm). The #55 drill bit is used by two different length handles. Slot tool blade sizes include .017 and .009 for all carburetors. **NOTE: For hand use only. The 1-3/16 collar is used for M-4 ll 16 and 18 carburetors. The 1-3/8 collar is used for M-2 5 6 21 31 41 41L 42
16-1409" This Jims spigot bore tool allows the boring of cylinder spigot hole up to 3.8125 by using the stock cylinder base holes. 1936-1952 EL 1936-1952 W 1941-1965 FL

Precision machined from steel and heat treated for durability. Includes three interchangeable adaptors to service all Linkert carburetors to remove venturis. **NOTE: The use of an arbor or hydraulic press is recommended. 1941-1965 FL

Liquid oil pressure gauge 0-60lbs features a black face stainless steel case chrome rim housing and weather resistant sealed lens. Liquid filled face eliminates needle bouncing giving a constant reading. Gauge has a 1/8 National Pipe Thread male rear fitting. 0-All models

Lockhart patches can be either ironed or sewn on. NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. Sold as a pair. 0-All

Lodge spark plug patches can easily be ironed or sewn on. Sold as a pair. NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Parkerized lower brake cable clamp for Spring Forks. 1936-1940 EL 1941-1948 FL 1938-1948 UL 1929-1952 WL 1929-1958 G

Parkerized lower brake cable clamp for Spring Forks. 1936-1940 EL 1941-1948 FL 1938-1948 UL 1929-1952 WL 1929-1958 G

Chrome plated complete stock lower engine mount kit features heat treated and plated bolts locknuts and heavy duty washers. 2007-UP FLT

Lower fender trim rail includes two stanchions and one ball in the center. Mount studs are 1/4-20 UNC thread. Trim rail is chrome plated steel. 1949-UP FL

Lower fender trim screw kit. Used on fender trim. 0-Replacement application screws for fender trim

Fork bearing race set includes 1 threaded upper and 1 lower race. For use with 1-1/8 fork stems only. 1930-1936 VL

Lower fork damper tube. Sold as a pair. 2006-2017 FXD

• High quality replacement fork legs for Softail

• orged from 6061-T6 for superior strength
• Beautiful triple chrome plating

• 8 piece button head allen screws and washer kit

Lower front mount tie rod ball joint. 1924-1929 JD 1930-1933 VL 1936-1952 EL 1941-1984 FL 1938-1948 UL