All

MAIER Rear Hugger, Gloss, made in the usa, Plastic, specific application, Fender

• Created with the racer in mind
• A great alternative to the stock piece, offering attractive styling and proven coverage of the rear tire that is required to reduce turbulence and drag

MAIER Rear Splash Guard, Black, Textured, made in the usa, specific application

• Fender extensions designed to attach to the lower part of the front or rear fender, offering additional protection from tire sling; help keep exhaust crossover pipes free from dings
• Rear splash guards attach under the rear seat, keeping the rear of the motor and shock free of mud and gunk
• Mount in minutes

MAIER Rear Splash Guard, Black, Textured, made in the usa, specific application

• Fender extensions designed to attach to the lower part of the front or rear fender, offering additional protection from tire sling; help keep exhaust crossover pipes free from dings
• Rear splash guards attach under the rear seat, keeping the rear of the motor and shock free of mud and gunk
• Mount in minutes

MAIER Replacement Left Side Panel, Black, Plastic, Each, Honda 71-76 CB500/550K

• High-impact ABS plastic
• Black only; priced per side
• Moly fasteners included

MAIER Replacement Left Side Panel, Black, Plastic, Each, Honda 77-78

• High-impact ABS plastic
• Black only; priced per side
• Moly fasteners included

MAIER Replacement Right Side Panel, Black, Plastic, Each, Honda 71-76 CB500/550K

• High-impact ABS plastic
• Black only; priced per side
• Moly fasteners included

MAIER Replacement Right Side Panel, Black, Plastic, Each, Honda 77-78

• High-impact ABS plastic
• Black only; priced per side
• Moly fasteners included

MAIER Smoke Universal Sport Windshield, Acrylic, specific application

• Designed to fit most standard motorcycles with 7/8" handlebars
• Sleek, sporty styling fits most standard rectangular and round headlights
• Quick-release hardware allows easy removal
• Fully adjustable shield moves up or down to match the rider's height
• Made of DOT-certified acrylic
• Available in clear or smoke

MAIER Universal Mirror Mount, Natural, Anodized, made in the usa, Aluminum, Each, size 10mm

• Universal fit for most clutch perches
• Mirror mount comes with a standard 10mm thread
• Mount holes are 6mm and 31mm (1.220") center-to-center

NOTE: This mount does not fit hydraulic perches or KTM models.

Main dash coil wiring harness assembly runs from the dash panel to the OEM type terminal box mounted behind the coil or dual point coils. *NOTE: Made from 16 gauge cotton braided over vinyl wire with machine crimped and insulated #6 of the red and green wires and crimped #10 flag terminals on the other wire ends. 1948-1969 FL

Main Drive Gear Bushing Tool Drive Gear Bt 4 Spd 1936/Later Install/Remove Bushing....1005
Jims
Used to remove and install main drive gear bushings on Big Twin 1936/Later with 4 speed transmissions

This 45 main drive gear seal installer. 1929-1973 G

Main Drive Gear Seal Installer Bt 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256

• Reduces the possibilities of leaks or misalignment
• Used while the transmission is assembled, this tool sets the proper seal depth and has a protective sleeve for the seal
• A must for any shop

Jims
or use on Big Twin 5 speed 1980/Later

Main drive gear seal kit includes a case race nut lock tab seal o-ring and cork. 1941-1976 FL

Main drive gear spacer kit for 4 speed models includes nut seal kit and collar. 1941-1976 FL 1937-1952 EL

Main Drive Gear,26 Tooth Bt Late 1977/1986 Replaces Hd# 35067-77
V-FACTOR
Main Drive Gear 26T
Fits Big Twin 4 speed Late 1977/Later
Use with needle bearing
Replaces HD# 35067-77

Main Drive Transmission Gear Sportster 1991/2005 Replaces Hd# 35034-89

• * Note: 1994/Later gears must be replaced as sets due to higher tooth count

Andrews
Main Drive Gear
Fits Sportster 5 speed 1991/2005
Replaces HD# 35034-89

Main nozzle discharge tube with lower plug is for L series carburetors. 0-All application for L" series carburetor"

Main Shaft Oil Seal Bt 70/84 Rpls Hd# 12026B Cometic C9351
Cometic Gasket
Main Shaft Oil Seal
Fits Big Twin 1970/1984
Package of 5
Replaces HD# 1202B
Cometic # C9351

Main wiring harness features plastic covered wires. Main wiring harness includes high tension wires only. Order handlebar tail lamp and turn signal wires separately. 1975-1976 XLH Electric start XL models

Mainshaft Ball Bearing Bt 1980/1984 5 Speed Models Rpls.8975 & 8980.Shielded Brg
RB International
Shielded Main Shaft Ball Bearing
Fits Big Twin 5 speed 1980/1984
Replaces HD# 8975 & 8980
(Imported)

Main shaft bearing C-Clip Fits All BDL Motor plates, Mfg.CC-193

Belt Drives Ltd.
Replacement Main shaft Support Bearing C-Clip
Fits Softail 1990/2006

Mainshaft Bearing Fits All Bdl Motorplates (Ex Shovelhead) Mfg.Mpb-9
The 14mm by 3 3/8 belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission mainshaft. The outboard support plate is reversible. The back side is channeled for another distinct look, but just the flat side will be polished.

eatures:

• 14mm x 85mm (3 3/8) wide belt, the same belt as used on top fuel Harley-Davidson^® race bikes
• Kevlar^™ clutch has nine 6 3/8 diameter frictions & eleven steels for ultimate power transfer
• Speciallly manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
• Hub is manufactured from 7075 aluminum and hard anodized for maximum strength and longevity
• 30-46 tooth combo provides 1.53:1 drive ratio

A) Belt Drives Ltd.
Replacement Mainshaft Support Bearing for Motor Plate
Fits Softail 1990/2006 (except Shovelhead)

Mainshaft Bearing Nut Lock Big Twin 4 Spd 1936/Later Replaces Hd 35050-40
V-FACTOR Bearing nut lock. 1936/Later. Sold in packages of 10. (Imported)

Mainshaft Case Bearing Kh Spt 1954/Later Bt L 84/89 Replaces Hd 9025A
Mainshaft case bearing 1954/Later K Model & Sportster 4 speed. Big Twin 1984/1989. (Imported)

Mainshaft Key Big Twin 5 Spd L1984/1990 Replaces Hd 37523-85..Mfg.2212
HARDWARE
Mainshaft Clutch Key
Fits Big Twin 5 speed 1984/1990
Package of 10
Replaces HD# 37523-85

Mainshaft Nut Cl Side W/O Seal Big Twin 10 Spring Clutch Rpl Hd 37496-41,37496-65..Mfg.7072
HARDWARE
Mainshaft Nut Clutch Side without Seal
Fits Big Twin 10 spring clutch 1941/Later
Replaces HD# 37496-41 & 37496-65

Mainshaft Oil Seal Big Twin Late 84/Later* D.Lip Rpls Hd 12052A Cometic #C9260
Cometic Gasket
Double Lip Mainshaft Oil Seal fits L, X 4 speed Late 1984/Later, Big Twin 5 speed Late 1984/Later, Softail 1989/Later & Dyna 1991/Later
Inner Primary Bearing Seal (Double Lip) fits Big Twin Late 1984/2005
Package of 5
Replaces HD# 12052A
Cometic # C9260

Mainshaft Shifter Clutch Big Twin 4 Spd 1938/Later Replaces Hd 35440-38....205340
Andrews Shift Clutch
Fits Big Twin 1938/Later
Replaces HD# 35440-38

Maintenance Free Battery 12V Flt 80/96 21Ah Power House + Rpls Hd 66010-82B ..Ytx24Hl-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
350 Cold Cranking Amps, 21 Amp Hours
8 ¹/₈ Long x 3 ⁷/₁₆ Wide x 6 ³/₈ Tall
Fits FLT, FLHT, FLHR 1980/1996
Terminal Location: - on FLH, + on RH
Replaces HD# 66010-82B
MG# YTX24HL-BS