Mid-USA

Bullet Marker Light Red Lens Dual Filament 12 Volt Chrome Plated

• A beautiful copy of theHarley-Davidson^® old style marker lights with 12 volt bulb and hidden wire mounting base
• Includes rubber mounting gasket and ⁵/₁₆ mounting stud with nut
• See below for availability of bulb and lens color

V-FACTOR
Chrome Plated Complete Assembly with dual filament bulb & red lens
(Imported)

Skull Cateye Taillight Univ Mt W/Clear Skull/Red Lens Cp Die Cast 4 Step Housing

• LED type taillight includes 33 red LEDs for the brake/running light function and 6 separate white LEDs to illuminate the license plate
• Die cast housing features a four step design
• lat backed housing for custom use mounts on 2 centers

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Skull Cateye Taillight (LED type)

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.

V-FACTOR
Chrome Plated LED type Taillight Assembly only
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

5 3/4"Custom Headlight Asy,12V 6"Long W/Bottom Mount & 60/55W Halogen Bulb,Black Powder Coat

• 60/55 Watt Halogen
• This 6 long aluminum assembly features a cam lock style bezel and a lens that meets DOT specifications
• Includes a replaceable H4 style 12 volt 60/55 watt halogen bulb
• Requires a ³/₄ wide male mount

Note: Does not include a high beam indicator and should be used accordinglyV-FACTOR
Matte Black Headlight Assembly

• Modern version of an old school classic.
• 21" x 2.15" is a great choice when using any of our custom springers found in Section 3 (Front End) of our catalog.
• 3/4" sealed bearings.
• These wheels have no brake rotor flanges (show use only).
• Custom wheel spacers must be used, depending on your application.
• All Chrome.

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals

V-FACTOR
Black Front Tube Style Wheel
Single Flange
Tapered 3/4" Bearing
16 x 3.00 Size
Fits FLST 1984/1999

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals

V-FACTOR
Black Front Tube StyleWheel
Single Flange
Tapered 3/4" Bearing
16 x 3.00 Size
Fits FLST 1984/1999

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
* Black Front Tube Style Wheel
Dual Flange
Sealed Ball 3/4" Bearing
21 x 2.15 Size
Fits FXD 2000/2003 & XL 2000/2007

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
* Black Front Wheel
Dual Flange
Tapered 3/4" Bearing
21 x 2.15 Size
Fits FX & XL 1984/1999

Weight: 20.00

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
Black Front Tube Style Wheel
Single 5/16" Flange
Tapered 3/4" Bearing
21 x 2.15 Size
Fits FXST & FXDWG 1984/1999

• HighFlow synthetic media
• Pressure relief valve
• Anti-drain back vlve prevents dry starts
• Think shell prevents punctures
• Works with all oils
• QS 9000
• 5 Micron
• Eight, 8.4mm holes for maximum flow
• Dim: 3 1/2" Long, 3/4-16 Thread
• Top: 17mm Hex Nut
• Chrome
• Fits Milwaukee-Eight 2017/Later, Twin Cam 1999/2017
• Anti-drain back upgrade for the following models:
  • XL Models (except XR) 1984/Later, FXR 1982/1994. Softail 1984/1998, Touring Models 1980/1998, FLHR, FLT, & FLHT
• Rpls HD# 63798-99A, 63731-99A, 63813-90, 63796-77A, & 63805-80A filters

POWER HOUSE PERFORMANCE SYSTEMS®

• Extra plate clutch kit.
• Fits Big Twin 1990/1997 & XL 1991/Later.
• Includes 9 friction plates with race proven material on tempered steel cores.
• Starburst groove pattern for maximum heat dissipation and oil circulation.
• Includes 8 tempered steel drive plates.
• Pre-set stack height for easy installation.
• Includes 15% stronger diaphram spring.
• Remove OEM rivet plate.
• 15% more surface area than stock for high performance strokers.

Jims camshaft needle bearing remover and installer tool is required for correct and accurate replacement of the camshaft inner needle bearing for M8 models. This tool holds tighter tolerances which allows for a more precise installation depth. *NOTE: This remover uses the Jims Style remover collet as well as Jims fine threaded installation driver. A new removal holes works as a window to let you see what you're doing while using the tool. 2017-UP FLT 2018-UP FLST 2018-UP FXST

Hayden Replacement Pad for Milwaukee-Eight®M6BT17-M8

Kit has a 2:1 ratio speedometer and a wired base. Base comes with sockets and bulbs, and includes five post key switch with two keys.
Order cable separately.

FL 1948-1967
FX 1980-1983

Black Vinyl Throttle Cable
Housing Length 39.2"
Free Length 4.9"
Throttle Cable
Fits FLHR 1996/Later
Replaces HD# 56376-96

Housing Length 62.8"
Free Length 2.7"
RPLS HD #38667-00

• 1 1/4" diameter for big look, 1" at riser mount
• Available in chrome or black
• 6" pull back
• Drilled for internal wiring

V-FACTOR
14" Chrome Jackknife Handlebars
Fits 1982/Later models, including Fly-By-Wire
34" Total Width, 15" Center Width

CLUTCH CABLE,BLACK VINYL 72.8" TOURING MODELS 2008-2016 HD 38667-08A +10"
Housing Length 72.8"
Free Length 3.7"
By: MOTION PRO INC

• Extended panels at the back side of this 3 quart steel oil tank eliminates the open air look between the oil tank and the rear fork support section of the Softail style frame
• See the electric section for battery cushions and straps

V-FACTOR
Chrome Plated Oil Tank
Fits Softail 1986/1999
Also fits HARDBODY Rigid frames & HARDBODY standard width Softail style. Due to rear fork interference, will not fit HARDBODY wide tire Softail style frames
(Imported)

Univ Throttle Cable,Braided 72"Housing,8"Free Length

Volt Tech Alternator Stator 22 amp, unmolded type. Features heavy duty copper windings with plug.

OEM: 29967-89B

XL 1990-2006

Univ Throttle Cable,Braided 66"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

XL 1991-UP

Univ Throttle Cable,Braided 64"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

FXST 1993-1993
FLST 1993-1993
FLT 1993-1993
FXD 1993-1993
FXR 1993-1993

Univ Throttle Cable,Braided 60"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

FXST 1991-1992
FLST 1991-1992
FLT 1991-1992
FXD 1991-1992
FXR 1991-1992

Replacement Cable Guide Uw Motion Pro Cable Clamps Holds Two Cables Mfg#11-0050
Kit includes 14 tooth gear, oil deflector, washer and nut and contains proper pieces for each application. Fits: XL 1959-1981 UOM: 1 - KIT Country of Origin: Imported

Maintenance Free Battery,12Amp Sportster 2004/Later* 200 Cca,12 Volts, .Ytx14L-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
200 Cold Cranking Amps, 12 Amp Hours
6 Long x 3 ⁷/₁₆ Wide x 5 ³/₄ Tall
Fits Sportster 2004/Later
Terminal Location: - on FLH, + on RH
Replaces HD# 65958-04
MG# YTX14L-BS

Maintenance Free Battery,18Amp St & Dyna 91/L*,Spt 97/03 310 Cca,12 V, Mfg #Ytx20Hl-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
310 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits Softail 1991/Later, Dyna 1997/Later, Sportster 1997/2003
Terminal Location: - on FLH, + on RH
Replaces HD# 65989-97
MG# YTX20HL-BS

Maintenance Free Battery,12V Es Fx 73/86,Fxr 82/L,St 84/90 Spt 79/96,XLcr 77/78 Ytx20-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
* 270 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits FXR 1982/Later, X Electric Start 4 speed 1973/1986, Softail 1984/1990, Sporster 1979/1996, XLCR 1977/1978
Terminal Location: + on FLH, - on RH
Replaces HD# 66672-96
MG# YTX20-BS

Maintenance Free Battery,18Amp St & Dyna 91/L* Spt 97/03 12V Rpls Hd 65989-97 ..Ytx20L-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
270 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits Softail 1991/Later, Dyna 1997/Later, Sportster 1997/2003
Terminal Location: - on FLH, + on RH
Replaces 65989-97
MG# YTX20L-BS

Maintenance Free Battery 12V Flt 97/L* 27.5Ah Power House + Rpls Hd 66010-97 ...Yix30L

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
335 Cold Cranking Amps, 27.5 Amp Hours
6 9/16 Long x 5 Wide x 6 7/8 Tall
Fits FLT, FLHT, including Road King & Road Glide 1997/Later
Terminal Location: - on FLH, + on RH
Replaces HD# 66010-97
MG# YIX30L

Maintenance Free Battery,18Amp Es Fx 73/86,Fxr 82/L,St 84/90 Spt 79/96,XLcr 77/78 Ytx20H-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
* 310 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits FXR 1982/Later, X electric start 4 speed 1973/1986, Softail 1984/1990, Sportster 1979/1996, XLCR 1977/1978
Terminal Location: + on FLH, - on RH
Replaces HD# 66672-96
MG# YTX20H-BS

Maintenance Free Battery 12V Flt 80/96 21Ah Power House + Rpls Hd 66010-82B ..Ytx24Hl-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
350 Cold Cranking Amps, 21 Amp Hours
8 ¹/₈ Long x 3 ⁷/₁₆ Wide x 6 ³/₈ Tall
Fits FLT, FLHT, FLHR 1980/1996
Terminal Location: - on FLH, + on RH
Replaces HD# 66010-82B
MG# YTX24HL-BS

Maintenance Free Battery,11.2A Cus App, 6" Long, 3-7/16 Wide 4-3/8" Tall, 230 Cca .Ytz14S

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
230 Cold Cranking Amps, 11.2 Amp Hours
6 Long x 3 ⁷/₁₆ Wide x 4 ³/₈ Tall
Fits Custom applications where size matters (Imported)
Terminal Location: + on FLH, - on RH
MG# YTZ14S