Mid-USA

Ign Part,Mech Adv W/Needle Brg Bt 70/E78 Spt 71/E78 W/Points Cond,Points Plt,Wire,Hardware

• This complete mechanical advance kit uses state of the art bearing technology at the flyweight pivot points to provide the smooth, consistent and reliable ignition timing you demand
• Complete kit includes everything as shown to update your point style ignition system with top quality performance parts

Note: This kit can also be used to convert a Dual ire electronic ignition system to a point type mechanical advance ignition if used in conjunction with a 4.3 OHM through 5 OHM ignition coil.V-FACTOR
Fits Big Twin 1970/Early 1978 & Sportster 1971/Early 1978

Ignition Sys Kit,Single Fire Bt 70/99(Ex Tc88,EFI)Spt 71/03 (Ex 1200S)Dual Plug D2Ki-3

• The ignition module is a self contained electronic advance ignition that is microcomputer controlled, with accurate control over the entire ignition process without the need for an external ignition module
• The ignition module can be run in the single or dual fire mode and used with single or dual plug heads when used with the correct OHM coil or combination of coils. or street use 2.8 through 3.5 OHM coils
• our independent rev limiter choices from 6000 to 7500 RPM
• Dramatic, user friendly improvement over the OE ignition
• The kits include ignition module and Dynatek end mount style coils
• The six individual switches allow you to tailor fit one of the eight different advance curves to produce a spark knock free ignition, whether you are running the stock displacement or a highly modified high compression Stroker
• A separate Tach output lead is included along with one LED indicator for static timing and one LED to assist in troubleshooting potential problems and the condition of VOES.
• Custom coil mounts must be used on kits with end mount style coils and can be found in the electric section

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Ignition System Kit includes: (1) 2000i Ignition Module 17624 and (2) Single fire, dual plug 3 OHM end mount coils
Fits Big Twin 1970/1999 (except fuel injected models & Twin Cam) & Sportster 1971/2003 (except 1200S)
Note: 1970/1982 models require the use of 17504 (Replaces HD# 32402-83) Cam Shaft mounted Ignition Rotor (Cup) and Mounting Bolt 17532 (Replaces HD# 2611B)

Ignition Part,Condenser Bt 48/L,All Spt W/Points Ign W/O Mag Rpls 32726-30A...Dr60X
Blue Streak^® condensers have long been the standard of quality in the automotive industry and are now available for yourHarley-Davidson^® .Blue Streak
Fits all Big Twin 1948/Later & all Sportster with Points Type Ignition (except Sportster using Magneto)
Replaces HD# 32726-30A

Ignition System Kit, Dyna S Bt 70/99(Ex EFI,Tc88)Spt 71/03 W/Coil Dual Fire Dsk6-1

• Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit
• Hall effect style ignition which uses magnetic pickups to trigger the spark
• Available in single or dual fire versions, with or without ignition coil(s)
• or best results use with our tuneable advance kit 17548
• Instructions included

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Complete Dual ire Ignition System Kit includes one 16039 Dyna 5 OHM Ignition Coil (recommended for street use)
Fits Big Twin 1970/1999 & Sportster 1971/2003 (except EI models, Twin Cam or Sportster 1200S)

Ignition Part,Point Set Big Twin 1970/L Spt 1971/Later 32661-70 Blue Streak Dr2240X
Blue Streak^® points have long been the standard of quality in the automotive industry and are now available for yourHarley-Davidson^® .Blue Streak
Fits all Big Twin 1970/Later & Sportster 1971/Later with Points Type Ignition (except Sportster using Magneto)
Replaces HD# 32661-70

Starter Part,Relay Blue Streak Bt 73/79, Spt 74/79 & 80 W/Rd Plastic Relay Rpl Hd 71463-73A

• These relays are equipped with durable heavy duty contacts, rugged molded cases and are totally sealed to assure reliable starting

Blue Streak
Fits Big Twin 1973/1979, Sportster 1974/1979 & Sportster 1980 using round plastic relay
Replaces HD# 71463-73A

Ign Module Kit Single/Dualfire Bt 70/99(Ex Tc88,EFI)Spt 71/03 (Ex 1200S)S/D Plugs D2Ki-1P

• The ignition module is a self contained electronic advance ignition that is microcomputer controlled, with accurate control over the entire ignition process without the need for an external ignition module
• The ignition module can be run in the single or dual fire mode and used with single or dual plug heads when used with the correct OHM coil or combination of coils. or street use 2.8 through 3.5 OHM coils
• our independent rev limiter choices from 6000 to 7500 RPM
• Dramatic, user friendly improvement over the OE ignition
• The kits include ignition module and Dynatek end mount style coils
• The six individual switches allow you to tailor fit one of the eight different advance curves to produce a spark knock free ignition, whether you are running the stock displacement or a highly modified high compression Stroker
• A separate Tach output lead is included along with one LED indicator for static timing and one LED to assist in troubleshooting potential problems and the condition of VOES.
• Custom coil mounts must be used on kits with end mount style coils and can be found in the electric section

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Ignition Module Only
Fits Big Twin 1970/1999 (except fuel injected models & Twin Cam) & Sportster 1971/2003 (except 1200S)
Note: 1970/1982 models require the use of 17504 (Replaces HD# 32402-83) Cam Shaft mounted Ignition Rotor (Cup) and Mounting Bolt 17532 (Replaces HD# 2611B)

Starter Part,Solenoid End Cvr Bt 4 Spd 65/86,Softails 84/88 Chrome Rpls Hd 31353-85T
Cover the body of that dull zinc plated or black painted OEM solenoid with the stamped steel body cover and the gray or black rubber solenoid boot with the die cast solenoid cover. Beatiful covers are a must for any good custom job. V-FACTOR
Chrome Plated End Cover
Fits Big Twin 4 speed 1965/1986 & Softail 1984/1988
Replaces HD# 31352-85T
(Imported)

Ignition System, Single Fire Bt 70/99(Ex Tc88,EFI)Spt 71/03 (Ex 1200S)Single Plug #3005

• Wide timing advance adjustment range for stock to highly modified engines
• Single or dual fire mode
• Kick or electric start
• Selectable multi-spark mode
• Includes high output 3.0 OHM single fire coil and 8.2mm silicone spiral core spark plug wires with 40 OHM per foot of resistance

Not legal for sale or use in California, or on any pollution controlled vehicles
Daytona Twin Tec
Complete Ignition Kit
Fits Big Twin 1970/1999 (except fuel injected models & Twin Cam) & Sportster 1971/2003 (except 1200S)
Note: 1970/1982 models require the use of 17504 (Replaces HD# 32402-83) Cam Shaft mounted Ignition Rotor (Cup) and Mounting Bolt 17532 (Replaces HD# 2611B)

Ignition System Kit, Dyna S Bt 70/99(Ex EFI,Tc88)Spt 71/03 W/Coil Single Fire Dsk6-2

• Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit
• Hall effect style ignition which uses magnetic pickups to trigger the spark
• Available in single or dual fire versions, with or without ignition coil(s)
• or best results use with our tuneable advance kit 17548
• Instructions included

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Complete Single ire Ignition System Kit includes two 16045 Dyna 5 OHM Ignition Coils (recommended for street use)
Requires custom coil mount
Fits Big Twin 1970/1999 & Sportster 1971/2003 (except EI models, Twin Cam or Sportster 1200S)
Note: Must purchase 17547 to retain tachometer

Adjustable Ignition Module Bt 1999/2003 Carbureted Twin Cams Using Two 12 Pin Con Tc88

• Provides a wide timing advance adjustment range for stock to highly modified engines
• Adjustable RPM limit in 100 RPM increments up to 9,900 RPM
• Built-in data logging stores the last 30 minutes of engine operation including RPM, vehicle speed, manifold pressure, ignition advance & battery voltage. This information is useful for tuning & diagnosing problems (requires optional PC link interface cable & software)
• The optional PC link interface cable & Windows compatible software allows for the use of a laptop PC to program a custom advance curve for precise dyno tuning & recalibrate the speedometer & odometer to accommodate non-stock tire sizes or gearing changes
• Visit www.daytona-twintec.com for the latest free software updates, requently Asked Questions (AQs) and product information
• Ignition modules provides full support for the J1850 data bus used for communciations with the instrument cluster and turn signal/security module. They are also compatible with the HD^® scan tool to read sensor data & clear diagnostic codes
• 17637 can be set for single spark per ignition cycle like stock or set for multiple sparks per cycle
• Includes instructions

Not legal for sale or use in California, or on any pollution controlled vehicles
Daytona Twin Tec
Ignition Module
Fits Twin Cam 1999/2003 (carbureted)

Ignition Sys Kit,Single Fire Bt 70/99(Ex Tc88,EFI)Spt 71/03 (Ex 1200S)Single Plug D2Ki-2

• The ignition module is a self contained electronic advance ignition that is microcomputer controlled, with accurate control over the entire ignition process without the need for an external ignition module
• The ignition module can be run in the single or dual fire mode and used with single or dual plug heads when used with the correct OHM coil or combination of coils. or street use 2.8 through 3.5 OHM coils
• our independent rev limiter choices from 6000 to 7500 RPM
• Dramatic, user friendly improvement over the OE ignition
• The kits include ignition module and Dynatek end mount style coils
• The six individual switches allow you to tailor fit one of the eight different advance curves to produce a spark knock free ignition, whether you are running the stock displacement or a highly modified high compression Stroker
• A separate Tach output lead is included along with one LED indicator for static timing and one LED to assist in troubleshooting potential problems and the condition of VOES.
• Custom coil mounts must be used on kits with end mount style coils and can be found in the electric section

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Ignition System Kit includes: (1) 2000i Ignition Module 17624 and (2) Single fire, single plug 3 OHM end mount coils
Fits Big Twin 1970/1999 (except fuel injected models & Twin Cam) & Sportster 1971/2003 (except 1200S)
Note: 1970/1982 models require the use of 17504 (Replaces HD# 32402-83) Cam Shaft mounted Igntion Rotor (Cup) and Mounting Bolt 17532 (Replaces HD# 2611B)

Starter Part,Relay Bt 73/79 Spt 74/79 & 80 W/Rd Plastic Relay Rpl Hd 71463-73A

• These relays are equipped with durable heavy duty contacts, rugged molded cases and are totally sealed to assure reliable starting

Standard Motor Products
Fits Big Twin 1973/1979, Sportster 1974/1979 & Sportster 1980 using round plastic relay
Replaces HD# 71463-73A

Starter Relay Sportster Models 2005/Later* Replaces Hd 31601-04

• 12 volt starter relay is a direct replacement and is fully potted for a water tight seal
Standard Motor Products
Fits Sportster 2005/Later
Replaces HD# 31601-04
(Imported)

Starter Solenoid,Chrome Bt 4 Spd 65/86,St 84/88,Spt 67/80,Rpls Hd# 71743-77A

• Provide positive starter engagement under the most severe conditions
• Permanently sealed, moisture proof cases are used to prevent water damage
• Hardened steel plungers with high performance contact discs assure maximum durability
• High strength dielectric end caps prevent arcing and burn through
See below for availability of finishes

POWER HOUSE
Chrome Plated finish with Single Bracket
Fits Big Twin 4 speed 1965/1986, Softail 1984/1988, Sportster 1967/1980
Replaces HD# 71743-77A

Starter Part,Brushes Hitachi Bt Spt Most Models 1973/1988 Rpls Hd 31582-73 & 31575-73

• High quality reproduction of the OE Hitachi style starter motor
• Includes mounting bolts with 12-24 thread

HARDWARE
Replacement Brushes (Set of 4)
Fits most models 1973/1988
Replaces HD# 31582-73 & 31575-73

Starter Armature Prestolite Bt Spt 66/82 Prestolite Style Replaces Hd 31542-66
This is a high quality reproduction of the OE Prestolite style starter motor.V-FACTOR
Replacement starter armature
Fits most Big Twin & Sporster 1966/1982
Replaces HD# 31542-66
(Imported)

Pyramid Starter Solenoid Cover. With Button 89/06 & Most Aftermarket Starters,

• Use with 1.2/1.4 k/watt starters
• Simple mechanical push button built into the starter solenoid end cover eliminates the handlebar button, relay and wires
• Does not affect the function of the handlebar button

V-FACTOR
Chrome Plated Pyramid Style Cover
Fits Big Twin 1991/Later & most aftermarket starters
(Imported)

Lever Action Starter Solenoid Big Twin 65/86, Softail 84/88 Chrome, W/Relay, Radius

• Made from CNC billet aluminum and assembled with highest quality components for long life
• Replaces OE starter solenoid which are notorious for having starting problems
• Just pull the lever to start your motorcycle
• Gives you a cool custom old school look
• Includes instructions & relay

V-FACTOR
Chrome Radiused Corners Style Lever
Fits Big Twin 4 speed 1965/1986 & Softail models 1984/1988

Starter Armature,Hitachi Style Bt Spt 1973/1988,Inc Bearing Replaces Hd 31580-73

• High quality reproduction of the OE Hitachi style starter motor
• Includes mounting bolts with 12-24 thread

V-FACTOR
Replacement Starter Armature (includes Bearing)
Fits Big Twin & Sportster 1973/1988
Replaces HD# 31580-73
(Imported)

Starter Sol Cvr W/Str Button Bt 89/06 & Most Aftermarket Starters, Chrome Plated

• Use with 1.2/1.4 k/watt starters
• Simple mechanical push button built into the starter solenoid end cover eliminates the handlebar button, relay and wires
• Does not affect the function of the handlebar button

V-FACTOR
Chrome Plated Original Style Cover
Fits Big Twin 1991/Later & most aftermarket starters
(Imported)

Alternator Stator,Unmolded Bt 76/80 2 Pin Male 17.8 Amp Replaces Hd 29965-75

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

POWER HOUSE PLUS
2 Pin Male Plug
17.8 AMP Unmolded Stator
Fits Big Twin 1976/1980
Replaces HD# 29965-75

Alternator Stator,Molded Bt 76/80 2 Pin Male 17.8 Amp Rpls Hd 29965-75..Accel.152102

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

Accel
2 Pin Male Plug
17.8 AMP Molded Stator
Fits Big Twin 1976/1980
Replaces HD# 29965-75

Alternator Stator, Unmolded Bt 81/88 2 Pin Female 22 Amp Replaces Hd 29965-81B

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

POWER HOUSE PLUS
2 Pin emale Plug
22 AMP Unmolded Stator
Fits Big Twin 1981/1988
Replaces HD# 29965-81B

Alternator Stator,Molded Bt 81/88 2 Pin Female 22 Amp Replaces Hd 29965-81B

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

POWER HOUSE PLUS
2 Pin emale Plug
22 AMP Molded Stator
Fits Big Twin 1981/1988
Replaces HD# 29965-81B

Alternator Stator,Molded Bt 76/80 2 Pin Male 17.8 Amp Rpls Hd 29965-75

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

POWER HOUSE PLUS
2 Pin Male Plug
17.8 AMP Molded Stator
Fits Big Twin 1976/1980
Replaces HD# 29965-75

Alternator Stator,Unmolded Bt 81/88 2 Pin Female 22 Amp Rpls Hd 29965-81B Accel 152104

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

Accel
2 Pin emale Plug
22 AMP Unmolded Stator
Fits Big Twin 1981/1988
Replaces HD# 29965-81B

Alternator Stator,Unmolded Spt 91/06 Round Female 22 Amp Rpls Hd 29967-89..Accel.152108

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

Accel
Round emale Plug
22 AMP Unmolded Stator
Fits Sporster 1991/2006
Replaces HD# 29967-89

Alternator Stator,Unmolded Flh &Flt Models 97/98 40 Amp Oval Shape Case Plug 29987-97

• POWER HOUSE PLUS Stators are high quality at a reasonable price and are fully guaranteed for 1 year
• Accel Lectric^™ Stators are the best available and include a manufacturer's limited lifetime replacement warranty
• or Charging System Tester, see the electric section

Accel
40 AMP Unmolded Stator
Fits FLH & FLT models 1997/1998
Note: OE stators are 38 AMP, these are a direct bolt-in with no modifications required
Replaces HD# 29987-97