Mid-USA

Wide Solo W/Driver Backrest Fits Softail 2000/Later* Mustang #79485

• Front seat measures 17 1/2
• Available with totally adjustable and removable backrest
• 14 wide rear seat is slightly recessed in front to allow movement of the driver backrest

Mustang
Naugahyde ront Solo Seat with Backrest
Fits Softail models 2007/2010 (Standard Rear Tire)
eatures chrome studs all around and a braided edge skirt with leather tied conchos

Ultra Driver Backrest Kit Fits Stock 97/08 One Piece Touring Seat Mustang #79067

• Totally adjustable and removable
• Chrome plated hardware
• Works with stock one-piece touring seat, not a solo

Mustang
Backrest Kit
Fits Stock 1997/2008

Wrap Around Backrest Extended Arm, Fits Flt/Flht 1986/Later* Smooth Mustang #75324
Mustang
Fits FLT, FLHT 1986/2007

Mustang Rear Seat, Studded Fits Softail 2008/Later* Recessed, 14"Wide Mfg #79486

• Front seat measures 17 1/2
• Available with totally adjustable and removable backrest
• 14 wide rear seat is slightly recessed in front to allow movement of the driver backrest

Mustang
Naugahyde Rear Seat
Fits Softail models 2008/2010 (Standard Rear Tire)
eatures chrome studs all around

Shock Absorbers,Stk Style 11" W/O Cvrs Bt 4 Spd 73/86(Ex St) Chrome Rpls Hd 54509-73A

• High quality which meets or exceeds OEM specifications
• Can be adjusted to three different spring loads
• Made to fit 1/2 mounting studs
• See below for availability of finishes
• Sold in pairs

Note: When installing shorter than stock length shocks always check tire to fender clearance with shocks fully compressed, headlight aim and correct lean angle on Jiffy stand.V-FACTOR
Chrome Plated Dual Cover
Eye to Eye Length: 11
Fits Big Twin 4 speed 1973/1986 (except Softail)
Note: OE length is 12
Replaces HD# 54509-73A

Oe Style Shocks 12",Black W/O Cvrs,Bt 4 Spd 76/86(Ex St) Rpls Hd 54509-73A

• High quality which meets or exceeds OEM specifications
• Can be adjusted to three different spring loads
• Made to fit 1/2 mounting studs
• See below for availability of finishes
• Sold in pairs

Note: When installing shorter than stock length shocks always check tire to fender clearance with shocks fully compressed, headlight aim and correct lean angle on Jiffy stand.V-FACTOR
Black Dual Cover
Eye to Eye Length: 12
Fits Big Twin 4 speed 1973/1986 (except Softail)
Note: OE length is 12
Replaces HD# 54509-73A

Dual Cover Shocks,Chrome Bt 58/72 W/1/2" Shock Studs 13.5" Length,Rpls Hd 54500-67

• High quality which meets or exceeds OEM specifications
• Can be adjusted to three different spring loads
• Made to fit 1/2 mounting studs
• See below for availability of finishes
• Sold in pairs

Note: When installing shorter than stock length shocks always check tire to fender clearance with shocks fully compressed, headlight aim and correct lean angle on Jiffy stand.V-FACTOR
Chrome Plated Dual Cover
Eye to Eye Length: 13 1/2
Fits Big Twin 1958/1972
Replaces HD# 54500-67

Bin Box,2"X 12"X 4-1/2" For 12"Deep Shelves Oil Resistant Mfg Mcosb-122

• An unbeatable bin for small parts inventory control, parts display and a thousand other uses
• Made out of 200 pounds test, oil and grease resistant, corrugated fiberboard
• Fits 12 deep shelves, 4 1/2 high
• Sold each

American Commission
2 wide Bin Box

Bin Box,10"X 12"X 4-1/2" For 12" Deep Shelves Oil Resistant Mfg Mcosb-1210

• An unbeatable bin for small parts inventory control, parts display and a thousand other uses
• Made out of 200 pounds test, oil and grease resistant, corrugated fiberboard
• Fits 12 deep shelves, 4 1/2 high
• Sold each

American Commission
10 wide Bin Box

Bin Box,8"X 12"X 4-1/2" For 12"Deep Shelves Oil Resistant Mfg Mcosb-128

• An unbeatable bin for small parts inventory control, parts display and a thousand other uses
• Made out of 200 pounds test, oil and grease resistant, corrugated fiberboard
• Fits 12 deep shelves, 4 1/2 high
• Sold each

American Commission
8 wide Bin Box

Oe Style Shocks 12",Black W/Cvrs,Bt 4 Spd 76/86(Ex St) Rpls Hd 54509-73A

• High quality which meets or exceeds OEM specifications
• Can be adjusted to three different spring loads
• Made to fit 1/2 mounting studs
• See below for availability of finishes
• Sold in pairs

Note: When installing shorter than stock length shocks always check tire to fender clearance with shocks fully compressed, headlight aim and correct lean angle on Jiffy stand.V-FACTOR
Black ull Cover
Eye to Eye Length: 12
Fits Big Twin 4 speed 1973/1986 (except Softail)
Note: OE length is 12
Replaces HD# 54509-73A

Narrow Body Shock Absorbers Softail 2000/Later & Custom Frame,Non-Adjustable Length,Cp

• 2 O.D. of this shock absorber makes it the perfect choice for those space limited custom applications
• Lowers motorcycle up to 1 3/4
• Includes aluminum spacers for proper heim end spacing

V-FACTOR
Chrome Plated Non-Adjustable Shock Pair
Fits Softail models 2000/Later
See the frame section for lowering kit

Upper Bracket Bolt Socket Tool Bt Wg 1949/L* Fxr 87/L Spt 88 /L* 35Mm 6 Point Hex Jims.2244
Save time and effort when removing the top fork tube bolts with this low profile Upper ork Bolt Socket Tool. Utilizing a ³/₈ drive ratchet or a 1 wrench, this tool works in close tolerances so that the handlebars will not have to be removed. The socket is also rubber protected so it does not damage the head of chrome fork tube bolts. To further protect the corners of bolts, the tool is designed to put all the force at the flats of the hex top and not the corners.Jims
Fits 35mm hex top fork tube bolts on all Big Twins with Wide Glide forks, FXR 1987/Later & Sportsters 1988/Later

Oe Style Shocks 11",Black W/Cvrs,Bt 4 Spd 76/86(Ex St) Rpls Hd 54509-73A

• High quality which meets or exceeds OEM specifications
• Can be adjusted to three different spring loads
• Made to fit 1/2 mounting studs
• See below for availability of finishes
• Sold in pairs

Note: When installing shorter than stock length shocks always check tire to fender clearance with shocks fully compressed, headlight aim and correct lean angle on Jiffy stand.V-FACTOR
Black ull Cover
Eye to Eye Length: 11
Fits Big Twin 4 speed 1973/1986 (except Softail)
Note: OE length is 12
Replaces HD# 54509-73A

Bin Box,4"X 12"X 4-1/2" For 12"Deep Shelves Oil Resistant Mfg Mcosb-124

• An unbeatable bin for small parts inventory control, parts display and a thousand other uses
• Made out of 200 pounds test, oil and grease resistant, corrugated fiberboard
• Fits 12 deep shelves, 4 1/2 high
• Sold each

American Commission
4 wide Bin Box

Oe Style Shocks 11",Black W/O Cvrs,Bt 4 Spd 76/86(Ex St) Rpls Hd# 54509-73A

• High quality which meets or exceeds OEM specifications
• Can be adjusted to three different spring loads
• Made to fit 1/2 mounting studs
• See below for availability of finishes
• Sold in pairs

Note: When installing shorter than stock length shocks always check tire to fender clearance with shocks fully compressed, headlight aim and correct lean angle on Jiffy stand.V-FACTOR
Black Dual Cover
Eye to Eye Length: 11
Fits Big Twin 4 speed 1973/1986 (except Softail)
Note: OE length is 12
Replaces HD# 54509-73A

Head Cup Bearing Race Tool Install Bt 1949/L* Spt 1978/L* Use W/60751 Universal Driver

• Reduce the chances of chipped paint and bruised knuckles
• Used with driver handle 60751, this combination makes short work of a clumsy job

Jims
or Big Twin 1949/Later & Sportster 1978/Later

Seal Driver Tool Dual Brkt Fat Fork W/41Mm Tubes Scratch Free Design

• Custom designed tool eliminates scratches on fork tubes during installation of fork seals
• The unique design has protective bushings fitted inside the tool at both ends
• These bushings guide the tool into place without scratching the fork tubes, even when using show chromed tubes
• See the front end section for our 36675 replacement bushings
• Tool can also be used to drive both the upper bushing and seal at the same time when the forks are disassembled

V-FACTOR
Fits all models with 41mm fork tubes
Replaces HD# 34634
(Imported)

Tray Rack,Large Scoop Metal 6 Drawer Rack,Use To Hold Hrdw #06587/#06596 Black Mfg..303

• Designed for hardware kits found in the general merchandise section
• Made from prime cold rolled steel
• Interlocked & welded construction
• Stackable with full metal sliders

Gardner-Westcott
Black Baked Enamel Finish with 6 stackable drawers

Top Fork Tube Plug Socket Tool Bt 1949/L* W/Wide Glide Fork R&R Top Nut 1/2"Dr Jims.2043

• This ¹/₂ Drive Top ork Tube Plug Socket eliminates the possibility of rounding or burring the top fork tube nut when removal is necessary

Jims
Fits Big Twin 1949/Later with Wide Glide forks

Ringer Fork Seal Driver, 35Mm Install Top Seal In Lower Leg For All 35Mm, Mp 08-0486

• Innovation design makes tool easier and safer to use than old fashioned pin aligned drivers
• Anodized aluminum locking ring features knurled finish for secure no-slip grip and postively locks body halves together during use
• No more worrying about part of the tool falling off and damaging the fork leg
• Perfectly weighted to drive seals
• Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings

Motion Pro
35mm ork Seal Driver
(Imported)

Lower Bearing Dust Shield Bt 49/L*(Ex Dyna 06/L)Spt 82/03 Rpls Hd 48365-48A..Cp
V-FACTOR
Chrome Plated Lower Bearing Dust Shield
Fits all models Big Twin 1949/Later, Sportster 1982/2003 (except Dyna 2006/Later)
Replaces HD# 48365-48A
(Imported)

Ringer Fork Seal Driver, 49Mm Install Top Seal In Lower Leg For All 49Mm, Mp 08-0494

• Innovation design makes tool easier and safer to use than old fashioned pin aligned drivers
• Anodized aluminum locking ring features knurled finish for secure no-slip grip and postively locks body halves together during use
• No more worrying about part of the tool falling off and damaging the fork leg
• Perfectly weighted to drive seals
• Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings

Motion Pro
49mm ork Seal Driver
(Imported)

Fork Stem Nut Wrench Flht 96/L* & Flhr 94/L* Jims #977

• Normally to gain access to the top stem nut you would need to remove the radio package
• With this tool you are able to loosen, tighten and torque to specifications the 1 ¹/₂ stem nut without radio removal
• A must when installing a front fork lowering kit

Jims
Wrench (sold each)
Fits FLHT 1996/Later & FLHR 1994/Later

Custom Fr Fork Kit Torpedo Cp Fxst 84/99,Fxwg 85/86 Fxdwg 93 /99 +6"Os Dual Disc 41Mm

• See below for availability of different styles and choice of mounts for type of disc preferred
• All kits feature lower legs that are CNC machined from billet aluminum for an exacting fit and finish
• The smooth and ball milled style feature a flush mount axle and the torpedo and missile style features concealed axle ends
• All fender mounts and caliper mounts can be removed if necessary
• The fork tubes have a chrome plated surface for smooth action and years of service
• ork length is measured from the top of the fork tube to the center of the axle
• * Indicates preassembled fork kits, all other kits must be assembled by a mechanic familiar with fork assembly

Note: These fork kits are shipped without fork oil so you can install the weight oil of your choice. Add 11.2 ounces per leg. See the front end section for fork oil. HARDBODY
Chrome Plated, Torpedo Style
Dual Brake Mount, Length +6 OS
Fits XST 1984/1999, XWG 1985/1986 & XDWG 1993/1999

Custom Fr Fork Kit Torpedo Cp Fxst 84/99,Fxwg 85/86 Fxdwg 93 /99 +4"Os Dual Disc 41Mm

• See below for availability of different styles and choice of mounts for type of disc preferred
• All kits feature lower legs that are CNC machined from billet aluminum for an exacting fit and finish
• The smooth and ball milled style feature a flush mount axle and the torpedo and missile style features concealed axle ends
• All fender mounts and caliper mounts can be removed if necessary
• The fork tubes have a chrome plated surface for smooth action and years of service
• ork length is measured from the top of the fork tube to the center of the axle
• * Indicates preassembled fork kits, all other kits must be assembled by a mechanic familiar with fork assembly

Note: These fork kits are shipped without fork oil so you can install the weight oil of your choice. Add 11.2 ounces per leg. See the front end section for fork oil. HARDBODY
Chrome Plated, Torpedo Style
Dual Brake Mount, Length +4 OS
Fits XST 1984/1999, XWG 1985/1986 & XDWG 1993/1999

Oil Seal,Front Fork Slider Fxr Spt 87/L Dyna 91/05 39Mm Fork Replaces Hd 45378-87

• Highest quality seals available
• Meet and exceed OEM specifications

V-FACTOR
Fits Showa 39mm ront orks - FXR, Dyna, Sportster 1987/Later
Package of 5, (Imported)
Replaces HD# 45378-87

Headlight Housing Cover Set Fl 4 Speed Models 1960/1984 Rpls Hd 67847-60 & 67848-60
V-FACTOR
Chrome Plated Headlight Housing Cover Set
Fits L 4 speed 1960/1984 & Early Wide Glide 1949/1959 when top triple tree with 3 ¹/₂ center to center riser is used
Replaces HD# 67847-60 & 67848-60
(Imported)