Instrument Mounts and Related Hardware

JOKER MACHINE Speedo Relocation Bracket With Easy Mount Clamp Black, Harley 95 - 13 XL

• Get a cool Hot Rod look without sacrificing function with one of these speedometer relocation brackets
• Fully CNC-machined from solid bar - not cast - for optimum quality
• Easy Mount Clamp allows bracket to be mounted without removing the fork tube; adjustable in virtually every direction and clears the fuel tank easily
• Outer housing enables you to retain 100% of your instrument lighting and is conveniently located around the right side of the speedo (all LED)
• Engraved, easy-to-see "white-filled" indicator symbols are placed next to the individual micro lights
• Speedo wiring plug is retained without extending the harness; fully straightforward wiring instructions for the indicator lights are provided
• Visibility over the handlebars is greatly improved by removing your stock handlebar bracket mount; at the same time visibility to the speedo is excellent, placed down on the left of the tank and below the bars providing a real racy look
• 39/16" i.d.
• Made in the U.S.A.

Oil Pressure Gauge Fitting Bt Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036

• Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
• Available to be used with or without the oil pressure sending unit as listed below
• These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
• Oil pressure gauge and sending unit not included
• Oil pressure sending unit found in the engine section

HARDWARE
Anodized Silver Oil Pressure Gauge itting for use with sending unit
Fits Big Twin Evolution, all years

Oil Pressure Gauge Fitting Kit Big Twin 1970/Later(Ex Tc88) 2 Pieces & O Ring Cp Mfg #2012

• Complete Adapter kits available without oil pressure gauge
• or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
• or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Adapter
Fits Shovelhead 1970/Later & Big Twin Evolution, all years

Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89
V-FACTOR
Rubber Damper
Fits 1968/1995 with cast dash
Replaces HD# 67190-89
(Imported)

Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md

• Designed for use with our Pro-Cycle by Autometer tachometers and speedometers found in the control section, but can also be used with other brands that have a 2 ⁵/₈ cup size
• Includes internal O-ring for clampless gauge mounting
• CNC machined from billet aluminum
• See the control section for longer riser clamp bolts with spacers

Cycle Performance
Polished Dual Gauge
Fits custom T-Bars with 1 ¹/₄ O.D. pullback risers
lat angle, 3 ¹/₂ mounting centers

V-Twin Manufacturing Electronic Speedometer, 2000-up Speedo Sensor Harness - Sold Each

OE Speedometer sensor wiring harness is used with the new speedometers that use a electric speed sensor.

OEM: 68820-98

Custom application

V-Twin Manufacturing Oil Gauge Fitting, Combo Gauge & Swtich Fitting, Chrome - Sold Each

Chrome oil pressure gauge fitting with switch hole. This fitting allows use of oil gauge or combining of a gauge and stock light switch unit.

All models

V-Twin Manufacturing Speedo-Iso-Support Rubber - Sold Each

Speedometer ISO mount rubber molded support increases speedometer rigidity and reduces vibration.
Use with speedometer isolation mount pin kit.
OEM: 67115-91

FLST 1991-UP
FXST 1991-UP
FXWG 1991-UP
FLT 1991-UP

Tech Note:

JOKER MACHINE Speedo Relocation Bracket With Easy Mount Clamp Black, Harley 14 - 15 XL

• Get a cool Hot Rod look without sacrificing function with one of these speedometer relocation brackets
• Fully CNC-machined from solid bar - not cast - for optimum quality
• Easy Mount Clamp allows bracket to be mounted without removing the fork tube; adjustable in virtually every direction and clears the fuel tank easily
• Outer housing enables you to retain 100% of your instrument lighting and is conveniently located around the right side of the speedo (all LED)
• Engraved, easy-to-see "white-filled" indicator symbols are placed next to the individual micro lights
• Speedo wiring plug is retained without extending the harness; fully straightforward wiring instructions for the indicator lights are provided
• Visibility over the handlebars is greatly improved by removing your stock handlebar bracket mount; at the same time visibility to the speedo is excellent, placed down on the left of the tank and below the bars providing a real racy look
• 39/16" i.d.
• Made in the U.S.A.

JOKER MACHINE Side Mount Speedo Relocation Bracket Black, Harley 95 - 15 XL

• Make relocating your speedo and indicator lights a snap; no wiring modifications required
• Mounts are fully CNC machined from solid bar - not cast - for optimum quality
• Attach to the left fork tube and is virtually adjustable, in every direction, and clears the fuel tank easily
• Visibility over the handlebars is greatly improved by removing your stock handlebar bracket mount and at the same time visibility to the speedo is excellent, placed down on the left of the tank and below the bars for a real racey look
• Available in your choice of black or clear anodized finishes
• Made in the U.S.A.

JOKER MACHINE Speedo Ring With Swivel Clamp Clear Anodized, Natural, Harley 93 - 15 XL

• Mount without the removal of your front wheel or any disassembly of the front forks
• Available for 39mm fork tubes
• Use Joker Machine's Indicator Clamp (PART #s 0603-0396, 0603-0397 or 0603-0398) to mount your stock indicators
• Made in the U.S.A.

JOKER MACHINE Speedo Ring With Swivel Clamp Black, Harley 93 - 15 XL

• Mount without the removal of your front wheel or any disassembly of the front forks
• Available for 39mm fork tubes
• Use Joker Machine's Indicator Clamp (PART #s 0603-0396, 0603-0397 or 0603-0398) to mount your stock indicators
• Made in the U.S.A.

JOKER MACHINE Bracket Speedo Relocation Bracket, Black, size 3 9/16", Harley 06-15 FX

• Get a cool Hot Rod look without sacrificing function with this speedometer relocation bracket
• Fully CNC-machined from solid bar - not cast - for optimum quality
• Bracket mounts to the left fork tube, is adjustable in virtually every direction and clears the fuel tank easily
• Outer housing enables you to retain 100% of your instrument lighting and is conveniently located around the right side of the speedo (all LED)
• Engraved, easy-to-see indicator symbols are placed next to the individual micro lights
• Speedo wiring plug is retained without extending the harness; fully straightforward wiring instructions for the indicator lights are provided
• Visibility over the handlebars is greatly improved by removing your stock handlebar bracket mount; at the same time visibility to the speedo is excellent, placed down on the left of the tank and below the bars providing a real racy look
• 39/16" i.d.
• Made in the U.S.A.

DAKOTA DIGITAL Oval Mini Speedometer Gauge Mount For 1 1/4" Handlebars, Chrome, Riser

• High-brightness readout is easy to read, even in direct sunlight
• Adjustable 0-255 mph/km/h speedometer with odometer and trip meter
• Features indicators for turn signals, high-beam, neutral, low oil pressure and check engine
• Available in three unique styles
• Sending units and mounting brackets available separately for use with electronic or cable drive systems; handlebar clamp mounts for American IronHorse motorcycles allow gauges to be mounted above or below handlebars and include wiring harness that plugs directly into stock wiring
• Gauges and mounts available with chrome or black-anodized finish

LA CHOPPERS 1 1/2" T-Bar Gauge Mount Black

• Relocate the stock gauge and bracket to the upper portion of the T-bar risers
• Billet aluminum construction
• Accept gauge brackets that attach to the handlebar clamp
• 43/16" on-center mount holes
• Made in the U.S.A.

LA CHOPPERS 1 1/4" T-Bar Gauge Mount Black

• Relocate the stock gauge and bracket to the upper portion of the T-bar risers
• Billet aluminum construction
• Accept gauge brackets that attach to the handlebar clamp
• 43/16" on-center mount holes
• Made in the U.S.A.

LA CHOPPERS 1" T-Bar Gauge Mount Black

• Relocate the stock gauge and bracket to the upper portion of the T-bar risers
• Billet aluminum construction
• Accept gauge brackets that attach to the handlebar clamp
• 43/16" on-center mount holes
• Made in the U.S.A.

LA CHOPPERS 1 1/4" T-Bar Gauge Mount Chrome

• Relocate the stock gauge and bracket to the upper portion of the T-bar risers
• Billet aluminum construction
• Accept gauge brackets that attach to the handlebar clamp
• 43/16" on-center mount holes
• Made in the U.S.A.

ACCUTRONIX Black Gauge Mount Adapter For 1" T-Bar Handlebars

• High-quality billet aluminum construction
• Available in chrome or black
• Designed to adapt FXD and XL OEM gauge mount
• Made in the U.S.A.

ACCUTRONIX Black Gauge Mount Adapter For 1 1/4" T-Bar Handlebars

• High-quality billet aluminum construction
• Available in chrome or black
• Designed to adapt FXD and XL OEM gauge mount
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Single Gauge Bracket, Harley 95-05 FX 95 - 11 XL

• Highly polished chrome-plated steel bracket
• Dual-gauge bracket accepts OEM speedometer, tachometer, and indicator lights
• Single-gauge bracket accepts the OEM speedometer
• Chrome backing plates included

DRAG SPECIALTIES Chrome Dual Gauge Bracket, Harley 94-05 FX 95 - 11 XL

• Highly polished chrome-plated steel bracket
• Dual-gauge bracket accepts OEM speedometer, tachometer, and indicator lights
• Single-gauge bracket accepts the OEM speedometer
• Chrome backing plates included

DAKOTA DIGITAL 5000/7000 Series Flat Riser Mount For 1" Bars Black

• High-brightness readout is easy to read, even in direct sunlight
• Adjustable 0-255 mph/km/h speedometer with odometer and trip meter
• Features indicators for turn signals, high-beam, neutral, low oil pressure and check engine
• Available in three unique styles
• Sending units and mounting brackets available separately for use with electronic or cable drive systems; handlebar clamp mounts for American IronHorse motorcycles allow gauges to be mounted above or below handlebars and include wiring harness that plugs directly into stock wiring
• Gauges and mounts available with chrome or black-anodized finish

ACCUTRONIX Chrome Gauge Mount Adapter For 1" T-Bar Handlebars

• High-quality billet aluminum construction
• Available in chrome or black
• Designed to adapt FXD and XL OEM gauge mount
• Made in the U.S.A.

Oil Pressure Gauge Fitting Bt Evo 84/L Use W/O Sending Unit Anodized Silver .2038

• Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
• Available to be used with or without the oil pressure sending unit as listed below
• These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
• Oil pressure gauge and sending unit not included
• Oil pressure sending unit found in the engine section

HARDWARE
Anodized Silver Oil Pressure Gauge itting without sending unit
Fits Big Twin Evolution, all years

Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013

• Complete Adapter kits available without oil pressure gauge
• or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
• or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Oil Pressure Gauge Adapter
Fits Big Twin 1970/1999 (except Twin Cam)

Oil Pressure Gauge Fitting,Kit Fits Big Twin Case 1936/1969 Chrome Plated Mfg #2014/2015

• Complete Adapter kits available without oil pressure gauge
• or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
• or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Adapter
Fits Big Twin 1936/1969

Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024

• Fits into the engine case and the oil pressure gauge bolts to the rocker box using strap
• Complete with chrome plated adapters and oil line to place the oil pressure gauge within easy sight
• Oil gauge is not included

HARDWARE
Chrome Plated Kit
Fits Big Twin Evolution, all years

Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021

• Mounts on rocker box
• Enables you to watch your oil pressure while riding your bike
• Replaces the rocker arm shaft end plug and clear all seats and gas tanks
• Installation instructions included

HARDWARE
Chrome Plated Hex Head
Fits Shovelhead & Ironhead Sportster Late 1971/Later

Mounting Cup Raw Stl Weld In Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4003

• 4000 Series
• 1 ⁷/₈ O.D. gauge features a high brightness dot matrix type vacuum fluorescent graphic display that has a blackout display when turned off
• Speedometer has a 0 through 255 MPH range with odometer and resettable trip odometer
• Tachometer has a 0 through 18,000 RPM range, features high RPM recall and is adjustable from one to fifteen cylinders
• Oil pressure gauge has a range of 0 through 150 PSI in increments of 1 PSI
• Housing is 1 ³/₈ deep with 2 ¹/₁₆ O.D. bezel

Dakota Digital
Raw Steel Cup for weld-on applications

Mounting Cup Chrome Uw Clamp Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4001

• 4000 Series
• 1 ⁷/₈ O.D. gauge features a high brightness dot matrix type vacuum fluorescent graphic display that has a blackout display when turned off
• Speedometer has a 0 through 255 MPH range with odometer and resettable trip odometer
• Tachometer has a 0 through 18,000 RPM range, features high RPM recall and is adjustable from one to fifteen cylinders
• Oil pressure gauge has a range of 0 through 150 PSI in increments of 1 PSI
• Housing is 1 ³/₈ deep with 2 ¹/₁₆ O.D. bezel

Dakota Digital
Chrome Cup for use with handlebar clamp (Aluminum)

Gauge Housing Cover Raw Steel Dakota Digital Series 3000 Rd Spdo/Tach M# Cup-3003

• Odyssey Series II, 2 ¹/₁₆ O.D.
• Designed with the chopper in mind, these gauges do not require any hard to hide external module
• Gauges are sold separately and will require the appropriate housing cover and mounting bracket as needed
• Speedometers will also require the appropriate sensor, adapter or sending unit as listed
• The gauges feature high visibility digital numerals that are easy to read in full sunlight and include a non-glare high contrast lens
• All calibration is done with the function button
• The tachometer features an adjustable warning point to flash the gauge readout and includes a high RPM readout

Dakota Digital
Required Mount
Raw Steel Gauge Housing Cover for welding on to custom made handlebars