Trn Stud Installation Tool Bt 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050 Use to easily install transmission mounting studs on Big Twins with solid mount transmissions. Features a ball bearing end on the jam stud that eliminates any possibility of stud damage. Can be used to install any 3/8-24 stud. Includes instructions. Jims Installation Tool Fits Big Twin 4 speed 1936/Later & Softail 5 speed 1986/1999
Main Drive Gear Bushing Tool Drive Gear Bt 4 Spd 1936/Later Install/Remove Bushing....1005 Jims Used to remove and install main drive gear bushings on Big Twin 1936/Later with 4 speed transmissions
Primary Drive Lock Bar Tool Bt 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316 Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.
Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims Fits all Big Twin 4 speed, Softail models & Dyna models all years
Primary Drive Lock Tool Touring Models 07/L* Jims 2312 Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.
Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims Fits Touring models 2007/Later 6 speeds
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315 Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.
Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims Fits Dyna 2006/Later & XST 2007/Later 6 speeds
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A Gauge is used to set and align shift forksJims or Big Twin 4 speed Late 1979/Later Replaces HD# 96385-78A
Use to remove the larger 2 1/4 hex nut from the end of main drive gear, which secures the rear drive trans pulley
Very save and easy to use
Just thread on the inner support collar to end of mainshaft, place the socket over the collar with your favorite 1/2 drive tool and unthread (right hand thread) locknut