New products

Debris Deflector, Stainless Fits Softail 2008/2010 Rpls Hd# 60197-08

• Designed to help keep the road grime and debris off the oil tank, starter motor and transmission area
• These stainless steel debris reflectors replaces the OE black plastic one
• or ease of cleaning and flashy good looks, the oil tank side is semi-polished while the more focal wheel side is highly polished

HARDBODY
Stainless Steel Deflector
Fits Softail 2008/2010 & all HARDBODY Softail style rear forks
Replaces HD# 60197-08

Debris Deflector, Stainless Fits Softail 2000/2007 Rpls Hd# 60476-00A

• Designed to help keep the road grime and debris off the oil tank, starter motor and transmission area
• These stainless steel debris reflectors replaces the OE black plastic one
• or ease of cleaning and flashy good looks, the oil tank side is semi-polished while the more focal wheel side is highly polished

HARDBODY
Stainless Steel Deflector
Fits Softail 2000/2007 & all HARDBODY Softail style rear forks
Replaces HD# 60476-00A

• Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Kraft Tech
Raw Steel 8" wide flat fender
Fits Big Twin & Sportster Rigid frames

Flat Rear Fender 7" Wide For Wide Tire Rigid Frame & Custom Use

• Designed with strength in mind, these one-piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Raw Steel 7" wide flat fender
Fits Big Twin & Sportster Rigid frames

Fender,Rear Stk Style Rigid Big Twin 1949/1957 Unpainted Replaces Hd 59604-39

• Rear fender for rigid frame is complete with the brackets and seat clip mounting holes
• Rear hinged section is smooth and undrilled
• Unpainted

V-FACTOR
Raw Steel
Fits L 1949/1957
Replaces HD# 59604-39

Fender,Rear Bobbed Tail Flat Universal Custom Use...6" Wide Rolled Heavy Gauge Steel

• Manufactured form 16 gauge rolled steel
• eatures a bobbed tail with a rolled edge
• ender measures 41 in circumference

V-FACTOR
Raw Steel 6 wide fender
Fits Big Twin & Sportster Rigid frame with chain or belt rear drive
(Imported)

Flat Rear Fender 6"Wide Universal Custom Use...6" Wide Rolled 14 Gauge Steel

• Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Kraft Tech
Raw Steel 6 wide flat fender
Fits Big Twin & Sportster Rigid frames

Rear Fender,Raw Steel Fxst 1984/1996 Rpls Hd# 59914-86A

• Excellent copy of the original rear fender
• Great for new builds or crash repair

V-FACTOR
Raw Steel ender
Fits XST 1984/1996
Replaces HD# 59914-86A

Oe Style Front Fender Flhx,Fltr 2000/2013 Uw 16"Wheel,Rpls Hd 59045-00B

• High quality, sturdy all metal construction
• Dresser style fender adds a classic touch to the 16 front wheel on Wide Glide front ends

V-FACTOR
Raw Steel Unpainted ront ender
Use with 16 wheel
Fits FLHX, FLTR 2000/Later
Replaces HD# 59045-00B

Rear Fdr,Smooth Style,Hinged Fl 4 Spd 1958/Later W/O Tail- Light Mtg Holes - Unpainted

• Designed without turn signal indents
• Hinged two piece design with smooth tail section for use with custom taillight
• See the electric section for taillights

V-FACTOR
Raw Steel
Fits L 4 speed models 1958/Later & will also fit X 4 speed models 1971/Later if L style fender supports found in the frame and body section are used
(Imported)

Oe Style Rear Fender Raw Steel Fxwg 1980/1986 Also Custom Use Unpainted Rpls Hd 59904-84

• An excellent reproduction of the original equipment rear fender found on XWG models
• This fender can also be used to customize earlier X and L models if used with our 22702 fender supports and 13205 taillight mount
• Unpainted

V-FACTOR
Raw Steel ender
Fits XWG 1980/1986
Replaces HD# 59904-84
(Imported)

Rear Fender Oe Style, Raw Stl Fxst 2000/2002 Replaces Hd 59914-00

• Excellent copy of the original rear fender
• Great for new builds or crash repair

V-FACTOR
Raw Steel Rear ender
Fits XST models 2000/2002
Replaces HD# 59914-00

Air Shock Pump For Use On All Fl Model Shock Absorbers W/ 0-60 Gauge
V-FACTOR
0-60 lbs. Gauge
or use on all air shock absorbers on L models
(Imported)

Rear Wheel Alignment Tool Most Swingarm Models,Aligns Rear Wheel With Swingarm

• Designed to help simplify the alignment of the rear wheel in the rear fork
• Easily shows if the rear axle is not parallel with the rear fork pivot axis
• Simply set one end of the tool on the center line of rear fork bolt and adjust the sliding pointer to the center line of the rear axle (as shown in additional images) then move the alignment tool to the other side of the bike. Move the axle adjuster as needed for perfect alignment

Motion Pro
(Imported)

Hand Pump,0-60 Psi For Air Adj Suspension Oem/Cus With No Loss Coupling Gp3-60

• Aluminum construction & easy to read 1.5 dial face
• An economical means of adding air pressure if the on-board compressor is not desired
• Pump is designed for people that will not be constantly changing the ride height - just set it, and forget it
• 4 long hose swivels 360° and clips to the handle for storage
• Connector valve is specially designed so that no air will be lost when removed
• A push button bleed-off valve saves time when adjusting pressure
• Includes instructions

Progressive Suspension
0-60 PSI Gauge

Rear Fork Bushing Tool Flt Models 80/01,Fxr Mdls 82/L Rpls Hd 96200-80 .1743

• Removes & installs bushings/cleveblocks
• This tool can be used with a shop press or two wrenches
• This design of the installation cup permits the exact depth to be set without guesswork
• Includes instructions
• Use with our 20105 bushing/cleveblock spreader tool to ease installation of rear fork onto the transmission housing

Jims
Fits FLT models 1980/2001 & FXR models 1982/Later
Replaces HD# 96200-80 1980/2001 & FXR Models 1982/Later

Tool,Rr Fork Bushing Spreader Flt Models 80/01,Fxr Mdls 82/L Rpls Hd #33805 .1707

• This tool spreads the cleveblocks far enough apart to allow easy installation of the rear fork on the models listed
• Includes instructions

Jims
Fits FLT models 1980/2001 & FXR models 1982/Later
Replaces HD# 33805

Taillight/Lic Mt L.E.D. Type Fxwg,Fxst 1980/1999 & Cus 7" Fat Bob Fdr Heavy Duty Mt Cp

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Complete LED type Kit with Heavy Duty Mount with slotted mounting hole for adjustment of angle (.120 thick)
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Taillight/Lic Mt 12V Bulb Type Fxwg,Fxst 1980/1999 & Cus 7" Fat Bob Fdr Heavy Duty Mt Cp

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Complete Bulb type Kit with Heavy Duty Mount with slotted mounting hole for adjustment of angle (.120 thick)
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Switch Housing,Hb Rh Chrome Bt,Vsrc,Spt 96/06 W/O Switches Rpls Hd 71564-96 & 71563-96
V-FACTOR
Chrome Plated Right Side Switch Housing Assembly
Includes button head mounting hardware and the thumb screw throttle lock assembly
Fits Big Twin, V-Rod & Sportster 1996/2006 (except models with radio controls)

Switch Housing,Hb Left Chrome Bt,Vrsc,Spt 96/06 W/O Switches Rpls Hd 71567-96 & 71568-96
V-FACTOR
Chrome Plated Left Side Switch Housing Assembly
Includes button head mounting hardware
Fits Big Twin, V-Rod & Sportster 1996/2006 (except models with radio controls)

Ignition Sys Kit,Single Fire Flt 94/98(Ex W/EFI)St 95/99 Dyna 95/98 Spt 94/97 8 Pin Con

• Eliminate your non-adjustable original equipment ignition with your choice of our Dyna 2000 Adjustable Ignition Module only or our Dyna 2000 Adjustable Ignition Module with Twin ire Coil kit
• Available for single and dual fire systems, single or dual plug applications, the module offers a selection of four different advance curves and programmable 6000 RPM to 7500 RPM rev limiter
• Designed to replace the stock ignition while still retaining the OEM dual fire type ignition pickup and the rotor (cup) that is located in the gear cover
• Instructions are included
• Available for a 7 pin or an 8 pin type plug-in connector

Not legal for sale or use in California, or on any pollution controlled vehicles
Dynatek
Single ire Module & Coil Kit
8 Pin Connector type, Dual Spark Plug per Head Kit
Fits FLT 1994/1998 (except with EI), Softail 1995/1999, Dyna 1995/1998 & Sportster 1994/1997

Tombstone L.E.D. Taillight/Mt All Fl Style Rear Fenders With With 73/98 Tail Light Mount Cp
These Tombstone Taillight Kits include a mount kit that will simplify installation on the L style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157 or our 11801 dual contact incandescent bulb. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models.

Note: These taillights are not DOT apporved and should be used accordingly.V-FACTOR
Chrome Plated LED type taillight with Mount Kit
Fits L style rear fenders 1973/1998
(Imported)

Taillight &Mount,Tombstone Kit All Model W/Fl Style Rear Fdr With 73/98 Tail Light Mount Cp
These Tombstone Taillight Kits include a mount kit that will simplify installation on the L style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157 or our 11801 dual contact incandescent bulb. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models.

Note: These taillights are not DOT apporved and should be used accordingly.V-FACTOR
Chrome Plated Bulb type Taillight with Mount Kit
Fits L style rear fenders 1973/1998
(Impoted)

Taillight Mount,Tombstone Kit To Adapt To Fl Style Rr Fender With 73/98 Taillight Mount Cp
These Tombstone Taillight Kits include a mount kit that will simplify installation on the L style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157 or our 11801 dual contact incandescent bulb. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models.

Note: These taillights are not DOT apporved and should be used accordingly.V-FACTOR
Chrome Plated Mount Kit only (includes fender gasket)
Fits L style rear fenders 1973/1998

Handlebar Switch Housing Lh Cp Bt Spt 82/95 (Ex Radio Control Rpls Hd 71567-82,71568-82A
V-FACTOR
Chrome Plated Left Side Switch Housing Assembly
Includes button head mounting hardware with allen wrench
Fits Big Twin & Sportster 1982/1995 (except models with radio controls)
(Imported)

Tune Up Kit,Blue Streak Big Twin 70/L Spt 1971/Later Point & Condenser Mfg.H/D-Kit1
Blue Streak^® points and condensers have long been the standard of quality in the automotive industry and are now available for yourHarley-Davidson^® .Blue Streak
Includes Point Set & Condenser
Fits Big Twin 1970/Later & Sportster 1971/Later with Points Type Ignitions
Replaces HD# 32661-70 & 32726-30A

Spark Plug Covers, Sparkies Blue Lens Fits All H-D Spark Plugs W/90 Degree Boots

• Designed to show your engine's spark through colored lenses at the base of the wire

V-FACTOR
Sparkies Spark Plug Cover Pair with Blue Lens
Fits all Harley-Davidson spark plugs with 90° boots
For 7mm or 8mm plug wires
Sold in pairs

(Imported)

Spark Plug Holder,Chrome Kit For 2 Plugs Fits Rear Frame W/1" Clamp Rpls Hd 91775-51T

• Original style as used on Big Twin 1940/1958
• Complete with chrome cover and 1 clamp to fit most frame tubes
• Will accept long reach spark plugs

V-FACTOR
Chrome Plated Kit
Replaces HD# 91775-51T
(Imported)