New products

Exhaust Port Gasket,Tapered All Evolution Mdls & Tc 88 Rpls Hd 65324-83A Mfg# C9288-1

• Stainless steel wire mesh gaskets are impregnated with graphite for a positive seal

Cometic
Taper Style Gasket (Sold Each)
Fits Big Twin Evolution 1984/1999, Twin Cam 1999/Later & Sportster 1986/Later
Replaces HD# 65324-83A

Exhaust Port Gasket,Tapered All Evolution Mdls & Tc 88 Rpls Hd 65324-83A Mfg# C9288

• Stainless steel wire mesh gaskets are impregnated with graphite for a positive seal

Cometic
Taper Style Gasket (Pack of 10)
Fits Big Twin Evolution 1984/1999, Twin Cam 1999/Later & Sportster 1986/Later
Replaces HD# 65324-83A

Exhaust Gasket,Exhaust Port Sh All Yrs W/Fiber Core Armor Clad Rpls Hd 65834-68A C9587
A flange type gasket to keep exhaust pipe aligned flat when bolt is tightened. Works better than original round gasket. These gaskets are constructed of compressed rubber gasket material which is a mixture of nitrite butadiene rubber and organic fillers which will withstand temperatures of 480 degrees and 360 psi pressure.iber Core, Armor clad both sides with a copper irering. Sold in packages of 10

Exhaust,Port Gasket Shovelhead All Years..Copper O Ring W/Fiber Filling
This copper covered fiber Exhaust Port Gasket was developed to produce a leak proof seal even when the exhaust pipe does not fit square with the port. This is achieved by Fits high temperature flexible fiber center and the soft copper cover. Due to the relatively thin width of these gaskets they can be stacked one on top of the other for extreme exhaust leaks.Exhaust port gaskets. Fits Shovelhead all years. Sold in packages of 10. (Imported)

Exhaust Gasket,Exhaust Port Sh All Years-With Copper Ring Rpls Hd 65834-68A
A flange type gasket to keep exhaust pipe aligned flat when bolt is tightened. Works better than original round gasket. These gaskets are constructed of compressed rubber gasket material which is a mixture of nitrite butadiene rubber and organic fillers which will withstand temperatures of 480 degrees and 360 psi pressure.With Copper Crush Ring. Sold in packages of 10. (Imported)

Exhaust Gasket,Exhaust Port Sh All Yrs W/Copper Crush Ring Metal Jacket Rpls Hd 65834-68A
A flange type gasket to keep exhaust pipe aligned flat when bolt is tightened. Works better than original round gasket. These gaskets are constructed of compressed rubber gasket material which is a mixture of nitrite butadiene rubber and organic fillers which will withstand temperatures of 480 degrees and 360 psi pressure.Copper Crush Ring with full metal jacket both sides. Metal has rust preventive coating. Sold in packages of 10. (Imported)

Slash Cut Drag Pipes,Black Sportster 1957/1985 (Ex 1979) 1-3/4" Dia,Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Black Primered Set
Fits Sportster 1957/1985 (except 1979)

Slash Cut Drag Pipes, Black Sportster 1986/2003 1-3/4" Dia, Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primer that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Black Primer Set
Fits Evolution Sportster 1986/2003

Slash Cut Drag Pipes,Black Softail 1986/2006 1-3/4" Dia,Channel Mount

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Black Primered Set
Fits Softail models 1986/2006

Slash Cut Drag Pipes,Black Fx 4 Spd 71/84,Fxwg 81/82 1-3/4" Diameter,Channel Mount

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Black Primered Set
Fits X 4 speed 1971/1984 & XWG 1981/1982

Slash Cut Drag Pipes,Black Sportster 2004/Later* 1-3/4" Dia,Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Black Primered Set
Fits Sportster 2004/Later

Slash Cut Drag Pipes,2" Dia Sportster 1957/1985 (Ex 1979) 40" Long,Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
2 Chrome Plated Set
Fits Sportster 1957/1985 (except 1979)

• Top quality drag pipes for models listed
• Chrome plated or black primer that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Chrome Plated Set
Fits Sportster 1957/1985 (except 1979)

Slash Cut Drag Pipes, 2" Sportster 1986/2003 40" Long, Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primer that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
2" Chrome Plated Set
Fits Evolution Sportster 1986/2003

Exhaust Drag Pipes Slash Cut Evo Spt 1986/2003 40" Long, 1-3/4" Od

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Chrome Plated Set
Fits Evolution Sportster 1986/2003

Slash Cut Drag Pipes,2" Softail 1986/2006 40" Lg ,Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primer that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4" or 2" diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
2" Chrome Plated Set
Fits Softail models 1986/2006

Not legal for sale or use in California, or on any pollution controlled vehicles.

Exhaust Drag Pipes Slash Cut Fx 4 Spd 71/84,Fxwg 80/82 40" Lg 1-3/4" Od Ks/Es

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
1 3/4 Chrome Plated Set
Fits X 4 speed 1971/1984 & XWG 1980/1982

Oil Filter Funnel, Drip-Free For Use On Most Models, Orange Ernst# 960

• Change the oil in your motorcycle without the headache of the mess
• Keep oil from damaging your rubber engine mount
• Superior U-shaped design fits the Harley like no other funnel can
• Hang tab for use on peg boards
• Punch and drain tub extension included for lower faring
• Includes instructions

Ernst
or all current HD Touring, Dyna, Softail, Sportster & forward control models

Stepless Clamp Fitting Kit, W/Tool,70 Piece Kit W/Plastic Storage Box, Mp 12-0083

• Convenient kit includes 70 pieces of hardware, a Motion Pro Side Draw Pincer tool and a convenient fuel line clamp size chart

Motion Pro

Kit Contains:

Stepless Clamps:

• 7.8 mm to 9 mm range (10 pieces)
• 9.6 mm to 11.3 mm range (10 pieces)
• 10.3 mm to 12.8 mm range (10 pieces)
• 10.8 mm to 13.3 mm range (10 pieces)
• 12 mm to 14.5 mm range (10 pieces)
• 13.2 mm to 15.7 mm range (10 pieces)
• 14.8 mm to 18 mm range (10 pieces)

Side Jaw Pincer Tool

Fuel Tank,Shop Auxiliary For Tuning Motorcycle W/O Tank Old 31010 Motion Pro 08-0032

• Have you ever needed to start a bike up without the gas tank on? Most shops have, and this tank will make it safer
• Includes 4 feet of ¹/₄ I.D. fuel line and has a brass bodied in-line petcock
• See through tank holds 2,000 cubic centimeters of fuel and has graduated markings to help verify fuel consumption
• Vented caps screws on to prevent spillage
• Includes a hanger bracket for handlebar mounting and storage

Motion Pro
Tank measures 12 tall x 4 ¹/₂ O.D.
(Imported)

Hose Clamp Tool,Straight Jaw Use On All Stainless Ear Clamp Both Step & Stepless Type
This 8 ³/₄ long hose clamp tool is designed to tighten the OE style non reusable ear type hose clamps that have been used by the factory since 1965.Motion Pro
Straight Jaw Ear Clamp Tool
Fits both step type & stepless hose clamps

Oil Cooler Standoff Clamps Cp Use With #89000 Oil Cooler 1-3/8" X 1-1/8" Aluminum

• Billet oil cooler has twin vertical tubes that follow the front downtubes on the frames of most models
• See below for availability of finish
• Requires standoff clamps for oil cooler

V-FACTOR
Chrome Plated Clamp Pair, 1 3/8 x 1 1/8
Required for use with 89000

Oil Cooler Stand Off Clamps Use With #89000 Oil Cooler 1-1/4" X 1-1/8" Aluminum

• Billet oil cooler has twin vertical tubes that follow the front downtubes on the frames of most models
• See below for availability of finish
• Requires standoff clamps for oil cooler

V-FACTOR
Chrome Plated Clamp Pair, 1 1/4 x 1 1/8
Required for use with 89000

Oil Cooler Standoff Clamps Cp Use With #89000 Oil Cooler 1-1/8" X 1-1/8" Aluminum

• Billet oil cooler has twin vertical tubes that follow the front downtubes on the frames of most models
• See below for availability of finish
• Requires standoff clamps for oil cooler

V-FACTOR
Chrome Plated Clamp Pair, 1 1/8 x 1 1/8
Required for use with 89000

Billet Oil Cooler,Chrome Fits Most Models Twin Vertical Coolers

• Billet oil cooler has twin vertical tubes that follow the front downtubes on the frames of most models
• See below for availability of finish
• Requires standoff clamps for oil cooler

V-FACTOR
Chrome Plated Oil Cooler

Oil Tank Fill Plug,W/Tempgauge Fl 70/84 Flt 80/91 XLch 70/78 Fxr 82/L Fx 71/L 3-7/8" Stick
These oil tank filler plugs are available in your choice of 3 different head styles for a variety of applications with center fill or side fill style oil tanks. V-FACTOR
Chrome Plated Temperature Gauge type, 3 ⁷/₈ dipstick
Displays 50° to 350°
Fits L 4 speed 1970/1984, X 1971/1985 (except XST), FLT 1980/1991, FXR 1982/Later, XLCH 1970/1978
Replaces HD# 62666-87T
(Imported)

Oil Tank Fill Plug,W/Tempgauge All St 00/L* W/Hardbody Logo 2-7/8" Stick Rpls Hd 62896-00
These oil tank filler plugs are available in your choice of 3 different head styles for a variety of applications with center fill or side fill style oil tanks. V-FACTOR
Chrome Plated Temperature Gauge type, 2 ⁷/₈ dipstick
Displays 50° to 350°
Fits Softail 2000/Later
Replaces HD# 62896-00
(Imported)

Oil Tank Fill Plug,W/Tempgauge St 1984/1999 Spt 1982/2003 2-5/8" Dipstick Rpls 62667-87
These oil tank filler plugs are available in your choice of 3 different head styles for a variety of applications with center fill or side fill style oil tanks. V-FACTOR
Chrome Plated Temperature Gauge type, 2 ⁵/₈ dipstick
Displays 50° to 350°
Fits Softail 1984/1999, Sportster 1982/2003
Replaces HD# 62667-87
(Imported)