New products

Primary Dr Gasket & Seal Kit Softail 89/93,Dyna 91/93 Alum Foam Material .C9886

• Synthetic rubber bonded to aluminum
• Kits include all of the necessary gaskets, seals, O rings and lock tabs required when removing and replacing the inner primary cover for service work
• The primary cover gasket and inspection cover gasket consists of an aluminum base sheet for rigidity covered with a chemically blown compound of foam-like nitrile synthetic rubber on both sides
• Synthetic rubber compound will not absorb oil and will conform to uneven gasket surfaces such as chrome plated housings
• The gasket's aluminum base material provides a stable platform for the synthetic rubber compound and prevents any unwanted extruding action common with paper type gaskets

Cometic
Fits Softail 1989/1993 & Dyna 1991/1993

Footpeg Pin Retaining Ring Fits Footpeg Mounting Pins Rpls Hd #11304

• Stainless steel so will not rust like OEM
• See below for availability of finish
• Includes footpeg anti-rattle washers
• Kit is a great upgrade item for a small investment

V-FACTOR
C-clip for pin
Pack of 10

Regulator,Generator End, Black All 65A 12 Volt Generators Rpl End & Regulator,W/Instructions

• Solid state regulator mounts directly to the left end of the generator eliminating the need for remotely mounted regulator
• Includes needle bearing for armature support
• Installation instructions are included

Note: Not designed to be used with a 5.5 Amp batteryV-FACTOR
Black Generator End
Fits Big Twin 1965/1969, Sportster 1965/1981 & Servi-Car 1965/1973

Hand Lever, Brake Touring Models 2008/Later* Rpls. Hd 42859-06 Chrome

• See below for availability of types of wide hand lever blades
• Standard wide blade levers are an improvement over OE levers
• Ergonomic wide blade levers have the business end rotated to further reduce hand fatigue

V-FACTOR
One Chrome Plated Standard wide blade lever for Brake use
Fits Touring models 2008/Later
Replaces HD# 42859-06
(Imported)

Upper Belt Guard,Chrome Plated Fx,Fxst & Flst Models 07/L* Rpls Hd 60867-08

• Replaces your factory equipped painted upper belt guard
• Available in chrome plated or black
• Sold eachV-FACTOR
  Chrome Plated Belt Guard
  Fits X, XST & LST models 2007/Later
  Replaces HD# 60867-08

Upper Belt Guard,Black Fx,Fxst & Flst Models 07/L* Rpls Hd 60867-08

• Replaces your factory equipped painted upper belt guard
• Available in chrome plated or black
• Sold eachV-FACTOR
  Black Belt Guard
  Fits X, XST & LST models 2007/Later
  Replaces HD# 60867-08

Caliper Mount Bracket Cus Wg Front Ends W/Mt On 4" Ctr W/2 Bolt Mounting,Lh Brkt

• Replacement pieces for HARDBODY custom front forks
• or use on forks with caliper brackets that have two mounting bolts on 4 centers

HARDBODY
Chrome Plated Caliper Bracket

Steel Drive Clutch Plates Use With Bdl Clutch Kit #73127 Set Of 7 Steels, Bdl Cc-100-Cs

• Provides about 60% more friction surface than stock clutches
• Kevlar plates can be run wet or dry
• Accurate spring tension is made possible with 9 coil springs and bolts
• Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
• Can be used with chain or belt primary drive

Belt Drives Ltd.
Replacement steel clutch plate set (includes 7)

Friction Clutch Plate Set, Fits Bdl, Set Of 5, Kevlar Wet Or Dry, Cc-100-Cp

• Provides about 60% more friction surface than stock clutches
• Kevlar plates can be run wet or dry
• Accurate spring tension is made possible with 9 coil springs and bolts
• Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
• Can be used with chain or belt primary drive

Belt Drives Ltd.
Replacement friction clutch plate set (includes 5)

Mikuni Jet Needle 96 Fits Hsr42 Smoothbore Carbs Brass

• Precision machined from brass for long life
V-FACTOR
Brass Jet Needles, Size: 96
Fits HS 42
Sold Each, (Imported)

Spdo Sensor Adaptor Harness Fxdwg 95/98 & St 96/99 18"Long Uw Oe Sensor & Uw Hly-2000

• or use in stamped steel or cast dash
• Manual & automatic calibration
• Speedo sensor sold separately
• Built in indicator lights, turn signal, oil pressure, neutral, & high beam
• See additional images for included mounting hardware
• Requires Sensor adapter harness, part# 48618

Dakota Digital
Required Sensor Adapter Harness

Oil Spout Spacer 15/16" Chrome

• Moves oil spout out to clear longer starters
• See below for available spacer thickness and finish
• Some starters may require stacking two pieces
• Available separately are bolt and washer kits and gaskets

V-FACTOR
Chrome ¹⁵/₁₆ thick Spacer
Fits FLT, FLHT, HR & FLTR 1993/2006
(Imported)

Oil Spout Spacer 15/16" Polished

• Moves oil spout out to clear longer starters
• See below for available spacer thickness and finish
• Some starters may require stacking two pieces
• Available separately are bolt and washer kits and gaskets

V-FACTOR
Polished ¹⁵/₁₆ thick Spacer
Fits FLT, FLHT, HR & FLTR 1993/2006
(Imported)

Starter Mtr 1.7Kw High Torque Big Twin 5 Speed 1989/2006 Blk Rpls Hd 31552-89A,31553-94

• Manufacturer's Limited Lifetime Warranty
• Includes printed performance test curve
• ISO certified manufacturer
• Includes jack shaft bolt for 1989/1993 models
• or best results, we recommend using All Balls high performance 4 gauge cables and a battery with at least 300 cold cranking amps found in the electric section
• See below for availability of field coils
• Due to additional length FLT, FLHT, & FLHR models 1993/Later will require an engine oil fill spout extension All Balls
  Black powder coated finish
  1.7 kilowatt 6 length
  Fits Big Twin 1989/2006 except Dyna 2006
  Replaces HD# 31553-90

Starter Mtr 1.4Kw High Torque Big Twin 6 Speed 2007/Later* Chrome Rpls Hd# 31618-06A

• Manufacturer's Limited Lifetime Warranty
• Includes printed performance test curve
• ISO certified manufacturer
• Includes jack shaft bolt for 1989/1993 models
• or best results, we recommend using All Balls high performance 4 gauge cables and a battery with at least 300 cold cranking amps found in the electric section
• See below for availability of field coils
• Due to additional length FLT, FLHT, & FLHR models 1993/Later will require an engine oil fill spout extension All Balls
  Chrome plated finish
  Fits Dyna 2006/Later and Big Twin 2007/Later
  1.4 kilowatt 6.25 length
  Replaces HD# 31618-06A

Starter Mtr 1.4Kw High Torque Big Twin 6 Speed 2007/Later* Black,Rpls Hd#31618-06.80-1013

• Manufacturer's Limited Lifetime Warranty
• Includes printed performance test curve
• ISO certified manufacturer
• Includes jack shaft bolt for 1989/1993 models
• or best results, we recommend using All Balls high performance 4 gauge cables and a battery with at least 300 cold cranking amps found in the electric section
• See below for availability of field coils
• Due to additional length FLT, FLHT, & FLHR models 1993/Later will require an engine oil fill spout extension All Balls
  Black powder coated finish
  Fits Dyna 2006/Later & Big Twin 2007/Later
  Replaces HD# 31618-06

Seat Mount Part,Through Pin Fits #27920 Quick Release Seat Pin .. Chrome Plated

• Make seat removal quick and easy with this Quick Release Screw and Pin
• Simply replace the original hold down screw with this quick release post, reinstall the seat and slide the pin through the post
• The slide through pin is held in place by a spring loaded ball stop detent and will not vibrate loose
• This little item is a time saver for those who service their machine or have the oil filler located under the seat

V-FACTOR
Chrome Plated Replacement Through Pin

Rear Axle Adjuster Spacer,Cp Softail Models 2008/Later* Rpls Hd 41694-08

• Machined to exact tolerances for correctly aligning the rear wheel
• Also fits aftermarket frames

V-FACTOR
Chrome Plated Spacer
Fits Softail models 2008/Later
Replaces HD# 41694-08, (Imported)

Rear Axle,Chrome Plated K Model & Sportster 1952/1978 Rpls Hd 45551-52

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Axle kit with chrome plated hardware
Fits K model and Sportster 1952/1978
Replaces HD# 45551-52
(Imported)

Custom LED Turn Signal,Black Universal,Single Function Smoke Lens

• Lights so bright they look like they are on fire!
• These custom LED turn signals are a new unique design, with resnel lens and Micro lens Array
• Unlike the old LED lights on the market where you see many individual LED dots, this new lens requires only one LED light and provides the same amount of lighting and brightness as the old style LED's
• The lens is held in place by a billet ring and 5 button head bolts
• Lights measure 3 in length
• Lens is 1 5/8 in diameter
• Sold each

JTK
Black Turn Signal
Smoke Lens Color
Universal Style Mount
Single iliment LED Style

Custom LED Turn Signal,Black Front/Rear Single Function Smoke Lens

• Lights so bright they look like they are on fire!
• These custom LED turn signals are a new unique design, with resnel lens and Micro lens Array
• Unlike the old LED lights on the market where you see many individual LED dots, this new lens requires only one LED light and provides the same amount of lighting and brightness as the old style LED's
• The lens is held in place by a billet ring and 5 button head bolts
• Lights measure 3 in length
• Lens is 1 5/8 in diameter
• Sold each

JTK
Black Turn Signal
Smoke Lens Color
Front/Rear Style Mount
Single iliment LED Style

Custom LED T/S,Chrome Universal Single Function Smoke Lens

• Lights so bright they look like they are on fire!
• These custom LED turn signals are a new unique design, with resnel lens and Micro lens Array
• Unlike the old LED lights on the market where you see many individual LED dots, this new lens requires only one LED light and provides the same amount of lighting and brightness as the old style LED's
• The lens is held in place by a billet ring and 5 button head bolts
• Lights measure 3 in length
• Lens is 1 5/8 in diameter
• Sold each

JTK
Chrome Plated Turn Signal
Smoke Lens Color
Universal Style Mount
Single ilament LED Style

Taillight Lens,Red Cateye Type Fits #11220,#11221,#11240 & #11241 Only

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Replacement Taillight Lens for 11220, 11221, 11240 & 11241

Replacement O-Ring For Spinner Style Gas Caps #80025 & #80026 Style Caps,Sold In Pack Of 2

• Kit requires a 1 ¹³/₁₆ I.D. hole in the gas tank for the steel bung to be welded in
• Vented gas cap is machined from billet aluminum and includes a sealing O ring
• Cap measures 1 ¹/₄ tall & has a 3 ³/₄ circumference at the spinners

V-FACTOR
Replacement Cap O Ring
Package of 2, (Imported)

Air Mixture Screw Kit,Cv Carb Fits Cv Carb #20781

• Kit includes spring, O ring and washerV-FACTOR

Replacement Piston Seals Use With #71204 Rpls Hd# 37963-02A

• Kit 71204 includes all items to convert to hydraulic clutch
See drive train section for clutch hose
• Kit 71204 includes master cylinder, transmission end cover, throw out bearing and push rod

V-FACTOR
Replacement Piston Seals
Replaces HD# 37963-02A

Clutch Pushrod & Snap Rings For Use With #71204 Kit Repls Hd# 36818-03

V-FACTOR
Replacement Clutch Pushrod & Snap Rings
Replaces HD# 36818-03

Hydraulic Clutch Lever, Chrome Plated, Fits Models With Hydraulic Clutch

• Kit 71204 includes all items to convert to hydraulic clutch
See drive train section for clutch hose
• Kit 71204 includes master cylinder, transmission end cover, throw out bearing and push rod

V-FACTOR
Chrome Plated Replacement Hydraulic Clutch Lever