New products

• Modern version of an old school classic.
• 21" x 2.15" is a great choice when using any of our custom springers found in Section 3 (Front End) of our catalog.
• 3/4" sealed bearings.
• These wheels have no brake rotor flanges (show use only).
• Custom wheel spacers must be used, depending on your application.
• All Chrome.

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals

V-FACTOR
Black Front Tube Style Wheel
Single Flange
Tapered 3/4" Bearing
16 x 3.00 Size
Fits FLST 1984/1999

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals

V-FACTOR
Black Front Tube StyleWheel
Single Flange
Tapered 3/4" Bearing
16 x 3.00 Size
Fits FLST 1984/1999

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
* Black Front Tube Style Wheel
Dual Flange
Sealed Ball 3/4" Bearing
21 x 2.15 Size
Fits FXD 2000/2003 & XL 2000/2007

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
* Black Front Wheel
Dual Flange
Tapered 3/4" Bearing
21 x 2.15 Size
Fits FX & XL 1984/1999

Weight: 20.00

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hub or black hub and rim
• Includes bearings and seals
• * When replacing models equipped with 19" wheels with these 21" wheels you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you must purchase custom shallow brake calipers.

V-FACTOR
Black Front Tube Style Wheel
Single 5/16" Flange
Tapered 3/4" Bearing
21 x 2.15 Size
Fits FXST & FXDWG 1984/1999

• High-quality replacement for your standard filter
• Can filter down to 10 microns
• Constructed with high-quality paper filter materials
• Manufactured with sealing ring to ensure perfect fit
• Offers maximum protection and long-lasting filter life
• Notes
• May be used with conventional and synthetic oils.

• HighFlow synthetic media
• Pressure relief valve
• Anti-drain back vlve prevents dry starts
• Think shell prevents punctures
• Works with all oils
• QS 9000
• 5 Micron
• Eight, 8.4mm holes for maximum flow
• Dim: 3 1/2" Long, 3/4-16 Thread
• Top: 17mm Hex Nut
• Chrome
• Fits Milwaukee-Eight 2017/Later, Twin Cam 1999/2017
• Anti-drain back upgrade for the following models:
  • XL Models (except XR) 1984/Later, FXR 1982/1994. Softail 1984/1998, Touring Models 1980/1998, FLHR, FLT, & FLHT
• Rpls HD# 63798-99A, 63731-99A, 63813-90, 63796-77A, & 63805-80A filters

MCM 2-1/4" Vortex drag pipe set features 2-3/8" diameter full coverage chrome heat shields, 2-1/4" header pipes and black ball milled vortex ends.

XL 1986-2003

• Cruisetec, a more performance-oriented tire, complements and completes the existing custom touring range for Metzeler which includes the Marathon 888
• Dynamic handling with a dual compound rear providing outstanding lateral and forward grip while maintaining excellent mileage
• Extended grooves within the tread pattern to improve control when leaning and water evacuation
• Ideal for riders looking for the right balance between performance, versatility and personality
• Enhanced tread pattern and high silica compound to promote chemical grip on wet surfaces
• Perfecting performance for V-Twin bikes

Features a Replica 19" x 2.5" drop center rim, a chrome hub with 1" bearings, and 40 chrome spokes.
Single disc or dual disc wheel is assembled and ready to directly bolt onto 49mm forks.

FXD 2006-2007

• Platinum Series cables feature a bright, silver-plated braid
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.
  
• Length of throttle and idle cables means length of outer housing only, excluding the elbows and/or adjusters.

Chrome outer primary cover kit comes with 5-hole derby gaskets.

60543-99

FXD 1994-2005
FXST 1995-2006
FLST 1995-2006
FXDWG 1994-2005

• Cobra's Speedster systems combine traditional styling and modern performance technology
• These shotgun pipes also produce class-leading power gains
• In part, the power gains come from the Cobra PowerPort, their proprietary crossover technology that helps to increase overall power from idle to redline
• Delivers the kind of power increase you normally experience with a 2:1 system, while retaining the clean classic lines of a 2:2 pipe
• Full-length, 222° heat shields

Front 21" x 3.25" dual disc wheel assembly features a chrome hub with all internal bearings installed, 40 spokes, and a chrome rim laced and trued.
NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation.

FLT 2008-2008 Dual Disc

Replica chrome 1" handlebar for stock replacement with a 2" knurled center spacing and indents for wiring.

45-7/8" Russell braided stainless steel front brake hose.
*D.O.T. Approved

OEM 45121-88B

FXS 1971-1984
XLH 1988-1998 1200
FXRC 1988-1994
XLH 1987-1998 883 Deluxe
XLH 1988-1993
XLH 1987-1995 883 Hugger
FXRS 1988-1994
FXR 1988-1994

Side plates are non-detachable and can mount sissy bars with a width of 8-3/4" in a chrome finish.
Set of two.

FLSTN 2000-2017
FLSTC 2000-2017
FLSTS 2000-2017

Chrome Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position.

FX 1971-1974
XL 1955-1974
FL 1965-1974

Chrome exhaust header set features down draft style slash cut ends with a " outer diameter and oxygen sensor ports welded in place. Bracket included that connects the 2 header pipes together, does not mount to frame.

For Evolution, TC-88, and XL models as listed. Pipes feature 18mm oxygen sensor bungs and includes plugs for non EFI applications.
Order baffles (VT-30-0103) and flange gaskets separately. 

*NOTE: Baffle set may require cutting to desired length. Bracket connects the front and rear pipe together for added support.

*NOTE: 2011-up applications will require the separate purchase of V-Twin #32-6578, O2 sensor adapter plugs.

*NOTE: 2012-17 FXST applications will require the separate purchase of reducer plugs.

FXD 1991-2017
FXST 1986-2017
FLST 1986-2017
XL 1986-2013 with Forward Controls only.

Chrome lake "y" style dumper exhaust header pipe is designed to look like hot rod side exhausts. The turn out end is 3" diameter. Fits with forward controls only.
Header pipes is 2" with 16 gauge steel construction.

*NOTE: These pipes will not work with floorboards. Collector is not baffled.

FXST 2000-2006

• Supple SaddleHyde™ offers a combination of comfort, glove-soft leathery feel and weather-resistant, no-maintenance good looks
• Driver's portion features GelCore™ for unsurpassed levels of comfort
• Narrow styling, a thin profile, and low riding height
• Designed and made in the USA
• Matching luggage available sold separately.

FXD lower triple tree features a chrome finish and accepts 49mm fork tube, narrow types.

FXD 2008-2017
FXDB 2013-2017
FXDC 2008-2017

The new HJC i91 is designed with touring and cruising riders in mind, offering a great mix of style and functionality. It has a slim and stylish design that's lightweight, making sure your journey is safe and enjoyable. The helmet also has improved aerodynamic performance for a smoother and more stable ride, helping riders stay focused on their adventure. The new dynamic multi-step sun visor provides added convenience and visibility when dealing with varying light conditions. Additionally, the 3D contour design of the helmet ensures a comfortable and secure fit, even if you wear glasses. Plus, it includes reflective trimming for added safety on the road. Overall, this helmet combines performance, style, and safety for a fantastic riding experience. 

The i91 is Bluetooth compatible with the 2nd GEN SMART HJC. (Sold Separately)

• Polycarbonate Composite Shell
• 3 shell sizes
• Slim and sleek front view
• High performance enhanced air circulation
• HJ-33 Pinlock prepared face shield
• Dynamic multi-step HJ-V12 sun visor
• Double D-ring with retention strap
• SMART HJC Bluetooth Ready
• Removable/washable cheek pads
• DOT approved

Custom rear master cylinder has 3/4" bore and comes complete with piston assembly.
Custom rear master cylinder features 2-1/4" spacing between mounting bolts, 3/8" x 24 thread for banjo bolt, milled body design and measures 3-1/2" long x 1-1/4" wide x 3" tall with 1 thru hole and 1 tapped hole for mounting. This master cylinder can be used on forward control kits.

ustom application for forward control

Chrome 5-speed outer primary cover.

*NOTE: Must order a 1.000" outer diameter starter shaft bushing and screw kit separately. 

OEM No: 60665-89

FLT 1989-1993
FXR 1989-1993

Seat T and piston kit includes T, cylinder with internal spring, nose mount and related hardware. Drilling and tapping of frame required.

FXST 1984-1999
FLST 1986-1999

Barnett heavy duty diaphragm clutch spring is 10% stiffer than the stock spring. Spring is .0870" thick.

37871-84

FLST 1986-1990
FXST 1985-1990
FXR 1985-1990
FLT 1985-1990

• Handlebars are manufactured with quality construction, including laser cut, burr free holes, and slots for internal or external wiring
• 3-1/2" on center knurling, and notched for throttle-by-wire applications
• All handlebars are CNC-bent for an accurate fit and incorporate comfortable, but aggressive looking wrist angles

• Handlebars are manufactured with quality construction, including laser cut, burr free holes, and slots for internal or external wiring
• 3-1/2" on center knurling, and notched for throttle-by-wire applications
• All handlebars are CNC-bent for an accurate fit and incorporate comfortable, but aggressive looking wrist angles