T-Style and Riser Bars

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• High Buckhorn
• Chrome Plated
• Width: 34 ¹/₂
• Rise: 12 ¹/₂
• Pullback: 8 ¹/₄
• Center Width: 9
• 1982/Later
• (Imported)

• 1 ¹/₄ O.D. steel handlebar provides a massive look
• To keep the switch wires out of sight the bars have been dimpled (like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally
• The brake side has been clearanced to be used with OE style master cylinders (all years, including 1996/Later) and most custom brake master cylinders
• Risers are threaded ¹/₂-13 and mount on 3 ¹/₂ centers

• V-FACTOR
• Chrome Plated
• Rise: 8
• Width: 32
• Pullback: 7 ³/₄
• (Imported)

• Notched for electronic throttle control
• Seamless steel tubing with a chrome-plated or gloss black finish
• Drilled for internal wiring
• Available in smooth unknurled style unless noted
• Made in the U.S.A.

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• Medium Buckhorn
• Chrome Plated
• Width: 28
• Rise: 8 ¹/₂
• Pullback: 9 ¹/₂
• Center Width: 6
• 1982/Later
• (Imported)

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• Low Buckhorn
• Chrome Plated
• Width: 34
• Rise: 7
• Pullback: 7 ¹/₂
• Center Width: 9
• 1982/Later
• (Imported)

1" handlebar with 8" rise without indents

1" handlebar with 6" riser without indents

Measurements:

Rise To Grip Tip: 6-1/2"
Rise To Center: 6"
Pull Back: 7"
Width Tip To Tip: 29-1/2"
Knurl: 2"
Bar Diameter: 1

1" handlebar with 5" rise without indents

1" handlebar with a 9" rise and indents, features 3-1/2" center to enter to accept 1/2" X 20 thread bolt

1" handlebar with a 7-1/2" rise and indents, features 3-1/2" center to center to accept 1/2" X 20 thread bolt

1" handlebar with 5" rise and indents features 3-1/2" center to center, to accept 1/2" X 20 thread bolts

1" handlebar with indents for external wiring.

Measurements:

Rise To Grip

1" handlebar with indents for external wiring.

Measurements:

Rise To Grip

Handlebar features 9" tall 'V' design and 9" rise. Handlebars are drilled and equipped with indents for internal wiring.
Handlebar is drilled for internal wiring.

1-1/4" handlebar without indents are drilled for internal wires. Handlebars have 3-1/2" bolt spacing.

Measurements:

Rise To Grip Tip: 10-1/2"
Rise To Center: 10-1/2"
Pull Back: 5

1-1/4" chrome handlebar and are drilled for internal wiring.

Measurements:

Rise To Grip Tip: 8-1/2"
Rise To Center: 8-1/2"
Pull Back: 10-1/2"
Width Tip To Tip: 32"
Knurl:

1" chrome handlebar with a 2" rise offer the pullback style and retain the drag bar look. These bars have indents and are knurled.

1-1/2" chrome handlebar with indents for external wiring.

Measurements:

Ri

1-1/2" chrome handlebar with indents and has 3-1/2" bolt centers for 1/2" x 13 thread.
This handlebar accepts only GMA handlebar controls with switch housings.

1-1/2" chrome handlebar with indents for external wiring.
This handlebar accepts only GMA handlebar controls with switch housings.

1-1/2" chrome handlebar has a 6" rise and a 3-1/2" bolt center for 1/2" x 13 thread.
This handlebar accepts only GMA handlebar controls without switch housings.

Measurements:

Rise To Grip

1" chrome handlebar without indents mounts to 3-1/2" center to center with 1/2"-20 bolts.

Measurements:

Rise To Grip Tip: 12"
Rise To Center: 7"
Pull Back: 11"
Width Tip To Ti

1" chrome handlebar with indents mounts to 3-1/2" center to center with 1/2" x 20 bolts.

1" handlebar with a 2" rise offer the pullback style and knurled to retain the drag bar look.

Measurements:

Rise To Grip Tip: 3"
Pull Back: 3-1/2"
Width Tip To Tip: 32-1/2"
Kn

Chrome 1" handlebar Buckhorn style

Measurements:

Rise To Grip Tip: 7-1/2"
Rise To Center: 7"
Pull Back: 10"
Width Tip To Tip: 33"
Knurl: 2"
Bar Diameter: 1"
Center

Chrome 1" handlebar low rise buckhorn style has indents for external wiring and is without knurls.

Replica chrome 1" handlebar for stock replacement with a 2" knurled center spacing. Handlebars do not have indents.

OEM: 55963-77

Measurements:

Rise To Grip Tip: 9-1/2"
Rise To Cen