T-Style and Riser Bars

DRAG SPECIALTIES Chrome Beach Bar 1" Touring Handlebars, center width 7.75", Natural, end rise rise height 4.5", overall width 36", pullback sweep 14.25", Harley 08-16 FL

• Notched for electronic throttle control
• Seamless steel tubing with a chrome-plated or gloss black finish
• Drilled for internal wiring
• Available in smooth unknurled style unless noted
• Made in the U.S.A.

Handlebar,Custom Low Buckhorn 1982/L* 34"Wide X 7"Rise X 7-1/2"Pull Back 9"Ctr Width Cp

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• Low Buckhorn
• Chrome Plated
• Width: 34
• Rise: 7
• Pullback: 7 ¹/₂
• Center Width: 9
• 1982/Later
• (Imported)

Handlebar, Hefty Drag Bar Cp 1.25 Od,8"Rise,8"Pullback 29"Wide,Drilled For Wiring

• 1 ¹/₄ O.D. provides a hefty look
• Dimpled and drilled at the switch area for any year switches (wires can be run internally or externally)
• Risers are threaded ¹/₂-13 and mount on 3 ¹/₂ centers

• V-FACTOR
• Chrome Plated
• Width: 29
• Rise: 8
• Pullback: 8
• (Imported)

V-Twin Manufacturing 8" Riser Bars are available with out indents, 1" O.D. - Sold Each

1" handlebar with 8" rise without indents

FL 1974-1981
FX 1974-1981
XL 1974-1981

V-Twin Manufacturing 6" Riser Bars are available with out indents 1" OD - Sold Each

1" handlebar with 6" riser without indents

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip Tip: 6-1/2"
Rise To Center: 6"
Pull Back: 7"
Width Tip To Tip: 29-1/2"
Knurl: 2"
Bar Diameter: 1

V-Twin Manufacturing 1" OD Riser Bar without Indents, 28.5" Width - Sold Each

1" handlebar with 5" rise without indents

FL 1974-1981
FX 1974-1981
XL 1974-1981

V-Twin Manufacturing Riser Bars are available with indents, 29" Width - Sold Each

1" handlebar with a 7-1/2" rise and indents, features 3-1/2" center to center to accept 1/2" X 20 thread bolt

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1994
FXD 1991-UP
FLT 1982-1984
FLT

V-Twin Manufacturing 5" Riser Bars with Indents, 28 1-2" Width - Sold Each

1" handlebar with 5" rise and indents features 3-1/2" center to center, to accept 1/2" X 20 thread bolts

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-

V-Twin Manufacturing 8"Swing Handle Bar - Sold Each

1" handlebar with indents for external wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

Measurements:

Rise To Grip

V-Twin Manufacturing 6"Swing Handle Bar - Sold Each

1" handlebar with indents for external wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

Measurements:

Rise To Grip

V-Twin Manufacturing MCM Radius V-Bar w-Indent, 1 1-4 - Sold Each

Handlebar features 9" tall 'V' design and 9" rise. Handlebars are drilled and equipped with indents for internal wiring.
Handlebar is drilled for internal wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
F

V-Twin Manufacturing Chrome Buffalo T Bars 32 3-4 8 - Sold Each

1-1/4" handlebar without indents are drilled for internal wires. Handlebars have 3-1/2" bolt spacing.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip Tip: 10-1/2"
Rise To Center: 10-1/2"
Pull Back: 5

V-Twin Manufacturing 9" Curved Riser Bar Handlebar with Indents fits 1982-Up - Sold Each
9" Curved Riser Bar Handlebar with Indents This 1-1/4" handlebar with 9" rise has indents for external wiring. Fits: FL 1982-1984 FX 1982-1984 XL 1982-UP FLST 1986-UP FXST 1984-UP FXR 1982-1984 FXR 1985-1

V-Twin Manufacturing 21-1/2" Lean Back Handlebar with Indents - Sold Each
21-1/2" Lean Back Handlebar with Indents 1 1/4" lean back riser bar features swept back design with indents for extended neck fork applications. Bars are drilled for internal wiring. Handlebars have indents on both sides for controls and s

V-Twin Manufacturing Buffalo "T" Bars w-Indents, 32 3-4 8 - Sold Each

1-1/4" chrome handlebar and are drilled for internal wiring.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip Tip: 8-1/2"
Rise To Center: 8-1/2"
Pull Back: 10-1/2"
Width Tip To Tip: 32"
Knurl:

V-Twin Manufacturing 2" Rise Drag Bars w-Indents, 1982-up - Sold Each

1" chrome handlebar with a 2" rise offer the pullback style and retain the drag bar look. These bars have indents and are knurled.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994

V-Twin Manufacturing 1.50" Buffalo Riser Drag Bar, 1.50 - Sold Each

1-1/2" chrome handlebar with indents for external wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

Measurements:

Ri

V-Twin Manufacturing 1982-up Fat Bar w.50 x 13 Thread, 10 - Sold Each

1-1/2" chrome handlebar with indents and has 3-1/2" bolt centers for 1/2" x 13 thread.
This handlebar accepts only GMA handlebar controls with switch housings.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR

V-Twin Manufacturing 1982-up Fat Bar w.50 x 13 Thread, 8 - Sold Each

1-1/2" chrome handlebar with indents for external wiring.
This handlebar accepts only GMA handlebar controls with switch housings.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994

V-Twin Manufacturing 1982-up Fat Bar w.50 x 13 Thread, 6 - Sold Each

1-1/2" chrome handlebar has a 6" rise and a 3-1/2" bolt center for 1/2" x 13 thread.
This handlebar accepts only GMA handlebar controls without switch housings.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip

V-Twin Manufacturing Buckhorn Riser Bars 1" w-Indent - Sold Each

1" chrome handlebar with indents mounts to 3-1/2" center to center with 1/2" x 20 bolts.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985

V-Twin Manufacturing Rise Drag Bars w-o Indents 2" rise - Sold Each

1" handlebar with a 2" rise offer the pullback style and knurled to retain the drag bar look.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip Tip: 3"
Pull Back: 3-1/2"
Width Tip To Tip: 32-1/2"
Kn