All

Spigot mount OKO carburetor features built in choke activator. Carburetor is OKO brand. Must order the air cleaner adapter which will allow the choice of CV air cleaners separately. 1971-1984 FX 1966-1984 FL 1961-1984 XL

Full kit includes 38mm OKO flatslide carburetor with built in choke activator throttle cable twist grip set manifold and spigot adapter. Carburetor is OKO brand. In order to mount an air cleaner to the carburetor use V-Twin #34-1425 air cleaner adapter available separately. 1986-UP XL

39 MM DUAL DISC BRAKE KIT

Black Tomahawk front fork brace for 39mm forks. These custom front fork braces are made from laser cut 3/16 thick steel. They allow removal of the front fender and increases rigidity to the front fork better than stock eliminating any fork twist while safeguarding the integrity of the suspension. The custom styling looks great on any motorcycle for use with 19 and 21 wheels and tires. *NOTE: Not for use with front fender. 1988-2010 XL Up to 21 X 3.5 Wheel" 1988-2005 FXR Up to 21 X 3.5 Wheel" 1988-2005 FXD Up to 21 X 3.5 Wheel"

Chrome Tomahawk front fork brace for 39mm forks. These custom front fork braces are made from laser cut 3/16 thick steel. They allow removal of the front fender and increases rigidity to the front fork better than stock eliminating any fork twist while safeguarding the integrity of the suspension. The custom styling looks great on any motorcycle for use with 19 and 21 wheels and tires. *NOTE: Not for use with front fender. 1988-2010 XL Up to 21 X 3.5 Wheel" 1988-2005 FXR Up to 21 X 3.5 Wheel" 1988-2005 FXD Up to 21 X 3.5 Wheel"

Fork assembly 39mm with chrome sliders. Assembly features chrome triple tree set axle kit and upper fork dust covers. Comes complete for Narrow Glide fork assemblies. 1996-1999 XLC

Lower 39mm fork damper tube spring set. Sold as a pair. 2006-2014 FXD 2006-2017 FXDB 2006-2017 FXDL 2006-2017 FXDWG 2006-2017 FLD

This 3rd and 4th countershaft cluster gear is a stock ratio gear set with 15 x 17 tooth gears and 2 bearings installed. 1976-1984 FL Late 1976 1976-1984 FX Late 1976 1984-1985 FXST

High contact mainshaft 3rd gear/countershaft 2nd gear for 5-speed models. Can also be used on 1979-93 models but will require the separate purchase of the countershaft 3rd gear/mainshaft 2nd gear. **Note:1994-up gears can be used in earlier transmissions but only in matched sets. 1994-2006 FXST 1994-2006 FLST 1994-2006 FLT 1994-1994 FXR 1994-2005 FXD

Universal 4 chrome heat shield for use on 1-3/4 exhaust pipes. Includes clamps for installation. Custom for 1-3/4 pipes"

4 gauge bezel cover set features a black finish. These bezel covers take just seconds to install and add beauty to your dash board. Includes adhesive tape for easy press in place application. 1996-1999 FLHT 1998-1999 FLTR

4 gauge bezel cover features a chrome finish. These bezel covers take just seconds to install and add beauty to your dash board. Includes adhesive tape for easy press in place application. 1996-1999 FLHT 1998-1999 FLTR

Mini shock is 4 long with exposed spring. Includes an adapter clevis to connect to seat T bar. *NOTE: Weight capacity is for 1 rider under 300lbs. 1941-1952 W 1941-1980 FL

4 Mini tail lamp with 6 volt 21/3 watt bulb. Mount studs are 3-1/2 apart. *NOTE: For show or decorative use only and is not D.O.T. approved. Custom application

4 muffler with chrome hollow point end tips. Order replacement T-bolts separately if required. 1995-2016 FLT

4" ribbed front fender can be used with 19" or 21" wheels. Features a steel construction with a raw finish.
Order brackets separately. Position cut drill mount holes as required. *NOTE: Constructed of steel.

All models

Length: 23-1/4"

Black 4 bottom mount deco headlamp features a longer tapered shell with a 12 volt 60/55 watt H-4 bulb. Includes mount block and stud. Headlamp does not have a hi-beam indicator. Can be used as a head lamp or a spot lamp. *NOTE: For show or decorative use only and are not D.O.T. approved ECE approved. Custom application

4 headlamp with visor features a 12 volt 60/55 W bulb and a clear lens. **NOTE: For show or decorative use only and is not D.O.T. or E.C.E. approved. 0-All models

Round black steel mirror with clamp on round stem for stock lever brackets. Custom application to clamp onto left or right side

4 electronic tachometer features a silver face with an orange needle. This is a plug and play type OEM replacement *NOTE: Face graphics are aluminum color as original. 2004-2013 XL 2004-2013 FLHT 2004-2017 FXD 2004-2013 FLHR

4 cylinder 1265cc 1926-1942 indian motor model featuring cast pewter construction on a wooden base. 0-All

4 point docking hardware kit is required for installing detachable sissy bars luggage rack or tour pak. 2009-2013 FLHR 2009-2013 FLTR 2009-2013 FLHX

Docking hardware kit for sissy bar and all other detachable accessories. Features 4 point docking and a black finish. 2014-UP FLT

Docking hardware kit for sissy bar and all other detachable accessories. Features 4 point docking and a chrome finish. 2014-UP FLT

Eyelet clutch cable for 4 speed models will work with late model handlebar assemblies. 1968-1984 FX 1968-1984 FL

Chrome 4-1/2 headlamp includes 35/35 watt H3 bulb with visor. Custom application

4-1/2 spotlamp set features chrome shells with 6 volt 30 watt single filament sealed beams with clear fluted lenses. Sold as a pair. 1964-1984 FL 1979-UP FLT 1986-UP FLST

4-1/2 spotlamp set features chrome shells with 12 volt 30 watt single filament sealed beams with clear fluted lenses. 1964-1984 FL 1979-UP FLT 1986-UP FLST

4-1/2 H4 spotlamp bulb is 12 volt 55/60W and features a H4 bulb. 1960-UP FL

4-1/2 H4 spotlamp bulb set includes two 12 volt 55/60w spotlamps with H4 bulbs. 1960-UP FL

4-1/2 LED daylight headlamp unit with horizontal D-shape lens and features a black finish. Includes a left and right lamp which fits into the existing dual headlamp housing. *NOTE: For dual lamps on FLT and FXD models. 2008-2017 FXDF

4-1/2 LED 12 volt spotlamp set features a chrome shell. The high powered LED spotlamp has a longer life than halogen bulbs and are easily assembled by directly plugging into the existing wiring. Compatible with most light housings. 1968-UP FL