All

CUSTOM DYNAMICS Plasma Rod Brake Light Adapter, Harley 10-13 FL

• Quick plug-and-play adapters allow you to add additional running lights, turn signals and/or brake lights without touching stock wires
• No cutting or splicing, which makes the adapter simple to install and remove
• Works great with Custom Dynamics Plasma Rods, Knight Riderz, and TruFLEX
• Sold each

CUSTOM DYNAMICS Plasma Rod, Each, size 8"

• Great solution for adding rear lights to baggers
• Patented diffuser provides even light disbursement and a smoked finish when the light is off
• Designed to be used as running, turn and/or brake lights
• Pre-taped with 3M automotive-grade tape for mounting and includes Posi-Taps for a quick, clean installation
• Plasma Rod dual converters convert two-wire to three-wire for running-brake applications

CUSTOM DYNAMICS Plasma Rods Dual Converter, size 10"-14"

• Great solution for adding rear lights to baggers
• Patented diffuser provides even light disbursement and a smoked finish when the light is off
• Designed to be used as running, turn and/or brake lights
• Pre-taped with 3M automotive-grade tape for mounting and includes Posi-Taps for a quick, clean installation
• Plasma Rod dual converters convert two-wire to three-wire for running-brake applications

CUSTOM DYNAMICS Plasma Rods Dual Converter, size 8"

• Great solution for adding rear lights to baggers
• Patented diffuser provides even light disbursement and a smoked finish when the light is off
• Designed to be used as running, turn and/or brake lights
• Pre-taped with 3M automotive-grade tape for mounting and includes Posi-Taps for a quick, clean installation
• Plasma Rod dual converters convert two-wire to three-wire for running-brake applications

CUSTOM DYNAMICS Plasma Rods, Pair, size 8"

• Great solution for adding rear lights to baggers
• Patented diffuser provides even light disbursement and a smoked finish when the light is off
• Designed to be used as running, turn and/or brake lights
• Pre-taped with 3M automotive-grade tape for mounting and includes Posi-Taps for a quick, clean installation
• Plasma Rod dual converters convert two-wire to three-wire for running-brake applications

CUSTOM DYNAMICS Plasma Rods, size 12"

• Great solution for adding rear lights to baggers
• Patented diffuser provides even light disbursement and a smoked finish when the light is off
• Designed to be used as running, turn and/or brake lights
• Pre-taped with 3M automotive-grade tape for mounting and includes Posi-Taps for a quick, clean installation
• Plasma Rod dual converters convert two-wire to three-wire for running-brake applications

CUSTOM DYNAMICS Plasma Rods, size 14"

• Great solution for adding rear lights to baggers
• Patented diffuser provides even light disbursement and a smoked finish when the light is off
• Designed to be used as running, turn and/or brake lights
• Pre-taped with 3M automotive-grade tape for mounting and includes Posi-Taps for a quick, clean installation
• Plasma Rod dual converters convert two-wire to three-wire for running-brake applications

CUSTOM DYNAMICS Purple Magicflex2 LED Sportbike Engine Kit

• 48" color-coded wire in high-temp protective black sheathing
• Attach with pre-attached 3M adhesive tape
• High-output 5050 surface-mount single-function LEDs
• 120 viewing angle
• 100% waterproof

CUSTOM DYNAMICS Push Button Switch, Black, made in the usa, 3-Pack, Universal, wiring included

• Black single pole push button
• Features a waterproof boot to protect the switch from the elements
• Sold in packs of three

CUSTOM DYNAMICS Red LED Light Bar, Dual function, lighted, number of bulbs 14, Each, Rear, Strip, specific application, Harley 13-16 FX

• Replaces stock reflector on rear fender
• 14 super-bright dual-intensity LEDs
• Simple installation
• Wire as run/brake or brake only

CUSTOM DYNAMICS Red LED Rear Fender Tip Board, Dual function, Harley 83-16 FL

• Replaces OEM #194 bulb
• 40 wide-angle super-bright LEDs
• Available in amber or white front LED lights, or run/brake rear LED lights
• Can be used behind any color lens
• Sold each

CUSTOM DYNAMICS Red Magicflex Low-Profile LED Accent Lights

• 48" color-coded wire in high-temp protective black sheathing
• Pre-taped with 3M tape
• Extremely versatile and flexible
• High-output 5050 surface-mounted LEDs
• 120 viewing angle
• Conformal-coated to make them 100% waterproof
• Sold in pairs
• Mounting blocks and mounting stickz available to make mounting easier
• Optional Black Magic III remote makes light strobe and breathe (sold separately; see page ???); on/off LED accent light remote control also available separately; see page ???

CUSTOM DYNAMICS Red Magicflex2 LED Sportbike Engine Kit

• 48" color-coded wire in high-temp protective black sheathing
• Attach with pre-attached 3M adhesive tape
• High-output 5050 surface-mount single-function LEDs
• 120 viewing angle
• 100% waterproof

CUSTOM DYNAMICS Red Replacement Signal Lenses, Turn Signal, Pair, specific application, Replacement Lens

• Replace stock signal lenses
• Available in red and smoke
• Sold in pairs

CUSTOM DYNAMICS Red/Amber Plasma Rods

• Dual-intensity 4-wire design
• Low-intensity red running, high-intensity red brake, high-intensity yellow turn signal
• Dual converters included, no modules required
• Illuminating plasma rods with smoke lens
• Work on all 12V DC negative ground systems
• Include 3M adhesive, promoter, and Posi-Taps
• Sold in pairs

CUSTOM DYNAMICS Red/Amber Plasma Rods, size 10"

• Dual-intensity 4-wire design
• Low-intensity red running, high-intensity red brake, high-intensity yellow turn signal
• Dual converters included, no modules required
• Illuminating plasma rods with smoke lens
• Work on all 12V DC negative ground systems
• Include 3M adhesive, promoter, and Posi-Taps
• Sold in pairs

CUSTOM DYNAMICS Red/Amber Plasma Rods, size 12"

• Dual-intensity 4-wire design
• Low-intensity red running, high-intensity red brake, high-intensity yellow turn signal
• Dual converters included, no modules required
• Illuminating plasma rods with smoke lens
• Work on all 12V DC negative ground systems
• Include 3M adhesive, promoter, and Posi-Taps
• Sold in pairs

CUSTOM DYNAMICS Red/Amber Plasma Rods, size 8"

• Dual-intensity 4-wire design
• Low-intensity red running, high-intensity red brake, high-intensity yellow turn signal
• Dual converters included, no modules required
• Illuminating plasma rods with smoke lens
• Work on all 12V DC negative ground systems
• Include 3M adhesive, promoter, and Posi-Taps
• Sold in pairs

CUSTOM DYNAMICS Smart Signal Stabilizer, Harley 09-13 FL

• 100% plug-and-play
• Adjustable, Normal and Max Settings (work with all combinations of LEDs)
• No RF Noise
• Spread Spectrum Technology
• 100% waterproof
• No load, no heat, recycle 90% of power
• Made in the U.S.A.

CUSTOM DYNAMICS Smart Signal Stabilizer, Harley 96-11 FX 96-13 FL 99 - 03 XL

• 100% plug-and-play
• Adjustable, Normal and Max Settings (work with all combinations of LEDs)
• No RF Noise
• Spread Spectrum Technology
• 100% waterproof
• No load, no heat, recycle 90% of power
• Made in the U.S.A.

CUSTOM DYNAMICS Smart Triple Play Controller, Lighting Control Module, Each, specific application, 12V, Harley 10-13 FL

• Designed to replace the run/brake/turn functions on Non-CVO 10-13 FLHX/FLTRX after the rear fender is replaced or the bottom fender tip is removed
• Features 10 brake strobe functions programmable by a switch
• The pigtail design has a Molex SS6 connector that allows the module to be plugged into the stock wire harness
• May require the use of a load equalizer

CUSTOM DYNAMICS Smart Triple Play, Brake, LED, Plug-and-Play, Run, Turn, Converter Kit

• Converts rear turn signals to run-brake-turn
• Works with LEDs or incandescent bulbs
• Ten user-selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake)
• Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight
• Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns & center taillight
• Built-in short circuit protection
• Sealed, weather-tight case
• Slim line design: 4.2" x 1.4" x .6"

CUSTOM DYNAMICS Smart Triple Play, Harley 14-16 FL

• Converts rear turn signals to run-brake-turn
• Works with LEDs or incandescent bulbs
• Ten user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake)
• Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight
• Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight
• Built-in short circuit protection
• Sealed, weather-tight case
• Slim line design: 4.2" L x 1.4" W x 0.6" H

CUSTOM DYNAMICS Smart Triple Play, Lighting Control Module, Each, specific application, 12V, Harley 04 - 13 XL

• Converts rear turn signals to run-brake-turn
• Works with LEDs or incandescent bulbs
• Ten user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake)
• Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight
• Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight
• Built-in short circuit protection
• Sealed, weather-tight case
• Slim line design: 4.2" L x 1.4" W x 0.6" H

CUSTOM DYNAMICS Smart Triple Play, Lighting Control Module, Each, specific application, 12V, Harley 12-16 FX 11-16 FL

• Converts rear turn signals to run-brake-turn
• Works with LEDs or incandescent bulbs
• Ten user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake)
• Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight
• Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight
• Built-in short circuit protection
• Sealed, weather-tight case
• Slim line design: 4.2" L x 1.4" W x 0.6" H

CUSTOM DYNAMICS Smart Triple Play, Lighting Control Module, Each, specific application, 12V, Harley 96-11 FX 96-13 FL 99 - 03 XL

• Converts rear turn signals to run-brake-turn
• Works with LEDs or incandescent bulbs
• Ten user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake)
• Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight
• Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight
• Built-in short circuit protection
• Sealed, weather-tight case
• Slim line design: 4.2" L x 1.4" W x 0.6" H

CUSTOM DYNAMICS Smoke Replacement Signal Lenses, Turn Signal, Pair, specific application, Replacement Lens

• Replace stock signal lenses
• Available in red and smoke
• Sold in pairs

CUSTOM DYNAMICS Standard DOT Flasher, wattage 120

• Replaces stock 2- or 3-pin flashers on most metric bikes
• Only one unit needed when replacing stock turn signals with LEDs on front and rear
• Maximum 120W

CUSTOM DYNAMICS Standard Magical Wizard Color Command LED Accent Light Remote Control

• Replacement remote controls for all Custom Dynamics Magical Wizard kits
• Two versions: standard remote control or Bluetooth wireless 4.0 compatible (Android & IOS Applications) remote control
• Two key fobs for manual operation
• Seven different pre-programmed colors
• Three different strobing patterns
• Three different speeds of breathing functions
• One of thousands of custom color choices
• Ability to color morph and strobe at the same time
• Small compact slim design
• Memory functions: Store The Last Function and Color for Easy Recall
• Short circuit protection on all inputs and outputs
• Timer function that turns lights off after 2 hours of use
• Powerful 350W/5A capacity
• Bluetooth remote also features Brake Override Safety Input (turns all lights to solid red when brake is applied)
• Sold each

CUSTOM DYNAMICS Tour-Pak Module Strobes, Each, Plug-and-Play, 12V

• 12VDC and works with LEDs or incandescent bulbs
• 10 user-selectable flash/strobe patterns
• Sealed weather-tight case
• 84 watts max power rating
• Over current protection, thermal protection, short circuit protection and reverse wiring protection
• Plug-and-play on all HD Tour-Paks with rear 1157 incandescent bulbs
• Compact size: 21/4" L x 11/4" W x 1/2" H

CUSTOM DYNAMICS Turn Signal Decoder, Lighting Control Module, made in the usa, Each, specific application, 12V, Harley 14-16 FL

• Allows the use of single function amber or red turn signals on the rear of a motorcycle

CUSTOM DYNAMICS Ultra Tour-Pak Run, Brake And Turn Signal Module, For 02-13 Ultra Tour-Pak With Incandescent Lights., Harley 02-13 FL

• Simple plug-and-play conversion to convert all of your Tour-Pak lights to run, brake and turn
• Works with LEDs only
• Greatly increases rear and side visibility of motorcycle by converting both side markers and rear taillights to running, brake and turn lights

CUSTOM DYNAMICS Ultraviolet Magicflex Low-Profile LED Accent Lights

• 48" color-coded wire in high-temp protective black sheathing
• Pre-taped with 3M tape
• Extremely versatile and flexible
• High-output 5050 surface-mounted LEDs
• 120 viewing angle
• Conformal-coated to make them 100% waterproof
• Sold in pairs
• Mounting blocks and mounting stickz available to make mounting easier
• Optional Black Magic III remote makes light strobe and breathe (sold separately; see page ???); on/off LED accent light remote control also available separately; see page ???

CUSTOM DYNAMICS Universal Wiring Adapter, Harley 14-16 FL

• Provides easy connection to run, brake, left and right turn, and ground wires

CUSTOM DYNAMICS Universal Wiring Adapter, made in the usa, 12V, Harley 96-16 FX 96-16 FL 99 - 03 XL

• Provides easy connection to run, brake, left and right turn, and ground wires