LED Motorcycle Replacement Lamps

ACCUTRONIX Replacement Black LED Light Strip

• Replacement LED light strips for Accutronix license plate kits
• Available in chrome and black finish
• Can be used for custom applications
• Made in the U.S.A.

ACCUTRONIX Replacement Chrome LED Light Strip

• Replacement LED light strips for Accutronix license plate kits
• Available in chrome and black finish
• Can be used for custom applications
• Made in the U.S.A.

DRAG SPECIALTIES Replacement Half-Moon LED Board, Red

• CNC-machined aluminum with a chrome finish
• Dual-function design LED light
• Accepts most 4" x 7" plates
• Includes rubber mounting block and hardware
• Fits most fenders (except bobbed fenders)

DRAG SPECIALTIES Replacement Cat-Eye LED Board, Red

• Chrome-plated CNC-machined billet aluminum with built-in axle adjuster spacer
• Dual-function LED taillight with tag light
• Accepts most 4" x 7" license plates with little trimming required
• Replacement lenses and LED boards available separately
• Swingarm mount or axle-mount style; see chart for applications

DRAG SPECIALTIES Replacement Red L.E.D. Board For PART #'s 2020-0274/0278

• Signal kit includes front amber and rear red turn signals with clear lenses, 41mm front clamps, rear mounting brackets and hardware
• Front signal kit only with dual-function amber LEDs and clear lenses is available; signal mounts not included
• Rear signals with dual-function amber or red LEDs and clear lenses are also available separately; mounting brackets must be purchased separately
• Replacement LED boards available in red or amber; sold each
• Replacement lenses available in clear or smoke; sold in pairs

DRAG SPECIALTIES Replacement Diamond LED Board

• Chrome-plated CNC-machined billet aluminum with built-in axle adjuster spacer
• Dual-function LED taillight with tag light
• Accepts most 4" x 7" license plates with little trimming required
• Replacement lenses and LED boards available separately
• Swingarm mount or axle-mount style; see chart for applications

DRAG SPECIALTIES Replacement LED Board For PART #2010-0565

• Chrome housing with red lens and top tag light
• Includes a top license plate mount
• Lens measures 45/8" x 21/2"
• Dual-function LED
• 41/4" on-center mounting holes
• Not DOT or ECE compliant

DRAG SPECIALTIES Repalcement Deco LED Board For PART #'s 2030-0169/0170/0171

• Combination taillight and license plate mount
• Cool Art-Deco style Cat Eye taillight adds a retro style to your custom
• Dual-function LED taillight will make sure you're visible
• Brake light pulses when first applied, then lights steady
• Aluminum billet construction, polished and chrome plated
• Acorn nut dresses up the axle, works with most sidemount license mounts on 3/4" Softail style axles

Wedge Type LED Taillight Bulb All Models Late 2003/Later* Dual Element,11 Leds

• 3157 style dual element LED taillight bulb
• Eleven bright LEDs for long life and low amperage draw
• Sold each

V-FACTOR
LED Taillight Bulb
Fits Big Twin & Sportster Late 2003/Later

V-Factor 12v LED Replacement Bulbs - Amber - Rear Base, 1157 Dual Contact

• Vibration and water proof
• 31 super bright LEDs per bulb
• Long lasting and low amperage draw, make these bulbs a great choice
• 1 5/8 diameter bulb thickness is .560
• Available in red or amber color LEDs and with side or rear position bases
• Available in single or dual contact as listed
• Sold each

V-FACTOR
Amber LEDs Bulb
Rear Base Position
Equivalent to 1157 Dual Contact

V-Factor 12v LED Replacement Bulbs - Amber - Rear Base, 1156 Single Contact

• Vibration and water proof
• 31 super bright LEDs per bulb
• Long lasting and low amperage draw, make these bulbs a great choice
• 1 5/8 diameter bulb thickness is .560
• Available in red or amber color LEDs and with side or rear position bases
• Available in single or dual contact as listed
• Sold each

V-FACTOR
Amber LEDs Bulb
Rear Base Position
Equivalent to 1156 Single Contact

V-Factor 12v LED Replacement Bulbs - Red - Side Base - 1157 Dual Contact

• Vibration and water proof
• 31 super bright LEDs per bulb
• Long lasting and low amperage draw, make these bulbs a great choice
• 1 5/8 diameter bulb thickness is .560
• Available in red or amber color LEDs and with side or rear position bases
• Available in single or dual contact as listed
• Sold each

V-FACTOR
Red LEDs Bulb
Side Base Position
Equivalent to 1157 Dual Contact

Led Bulb,Red 12V 19 Led'S Turn Signal Or Marker Light Single Contact Rpls #1156 Base
Light Emitting Diode (LED) Bulbs are the logical choice of the future. LED bulbs are not affected by vibration and they are known for their unbelievable lifespan. Most LED bulbs we have found produce only 3500 MCD (mini candle power), but these 19 LEDs per bulb type produce 7000 MCD. Total length measures 1 ¹/₂ and the maximum O.D. is 1.

Note: These bulbs are not DOT approved and should be used accordingly

Note: Due to the lower amp draw of these LED bulbs, a load equalizer may be required for the turn signal function. See the electric section for our turn signal load equalizer.V-FACTOR
Red Turn Signal or Marker Light only
Equivalent to 1156 single contact
(Imported)

Led Bulb,Red 12V 19 Led'S Turn Sig Or Tail & Brake Light Dual Contact Rpls #1157 Base
Light Emitting Diode (LED) Bulbs are the logical choice of the future. LED bulbs are not affected by vibration and they are known for their unbelievable lifespan. Most LED bulbs we have found produce only 3500 MCD (mini candle power), but these 19 LEDs per bulb type produce 7000 MCD. Total length measures 1 ¹/₂ and the maximum O.D. is 1.

Note: These bulbs are not DOT approved and should be used accordingly

Note: Due to the lower amp draw of these LED bulbs, a load equalizer may be required for the turn signal function. See the electric section for our turn signal load equalizer.V-FACTOR
Red Taillight/Brake Light or Running Light/Turn Signal
Equivalent to 1157 dual contact
(Imported)

Led Bulb,Amber 12V 19 Led'S Turn Sig Or Tail & Brake Light Dual Contact Rpls #1157 Base
Light Emitting Diode (LED) Bulbs are the logical choice of the future. LED bulbs are not affected by vibration and they are known for their unbelievable lifespan. Most LED bulbs we have found produce only 3500 MCD (mini candle power), but these 19 LEDs per bulb type produce 7000 MCD. Total length measures 1 ¹/₂ and the maximum O.D. is 1.

Note: These bulbs are not DOT approved and should be used accordingly

Note: Due to the lower amp draw of these LED bulbs, a load equalizer may be required for the turn signal function. See the electric section for our turn signal load equalizer.V-FACTOR
Amber Taillight/Brake Light or Running Light/Turn Signal
Equivalent to 1157 dual contact
(Imported)

V-Twin Manufacturing Red 19 LED Turn Signal Bulbs - Sold Each

Red straight 19 LED turn signal bulb. Fitting style 1156.

All turn signals

V-Twin Manufacturing Lamp Shape A Red Taillamp - Sold Each

Red LED flat style tail lamp bulb. Fits style 1157.

All tail lamps

V-Twin Manufacturing Lamp Shape A Amber Turn Signal - Sold Each

Amber LED flat style turn signal bulb.
Uses style 1156.

All tail lamps

V-Twin Manufacturing Amber Lazer LED For Turn Signal Light - 1156 - Sold Each
Amber Lazer LED For Turn Signal Light Amber colored lazer bulb with clear band for license plate. Use for fitted style 1156. Fits: All turn signals UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing Lolly Pop Red Tl Bulb - Sold Each

Red 12 volt lollypop style LED.
1157 type bulb

All turn signals

V-Twin Manufacturing Amer Brake 5 pack 12V LED Bulb - Pack

Amber 12 volt LED bulb is not affected by vibration for long life.
1157 type bulb

All tail lamps

V-Twin Manufacturing Lolly Pop Amber Signal Bulb - Sold Each

Amber LED lollypop style turn signal bulb.
1156 type bulb

All turn signals