Twin-Cam Specific Tools

Filter

    Filter

    Brand

    Collection

    clear
    Motorcycle Twin-Cam Specific Tools from K and G Cycles!
    20 products

    20 products

    Quick view
    V-Twin Manufacturing JIMS Outer Balancer Bearing Installer &
    V-Twin Manufacturing
    $217.04
    Sold Out
    V-Twin Manufacturing JIMS Case Bearing Conversion Tool
    V-Twin Manufacturing
    $1,311.26
    Quick view
    V-Twin Manufacturing JIMS Starter Ring Gear Rivet Fixture Kit
    V-Twin Manufacturing
    $499.91
    Quick view
    V-Twin Manufacturing JIMS Main Drive Gear Installer Kit
    V-Twin Manufacturing
    $140.59
    Quick view
    V-Twin Manufacturing JIMS Gasket Locator Tool (3PC Set)
    V-Twin Manufacturing
    $51.08
    Quick view
    V-Twin Manufacturing JIMS TC88 Cylinder Torque Plate
    V-Twin Manufacturing
    $568.04
    Quick view
    V-Twin Manufacturing JIMS TC88 Crank Shft Guide
    V-Twin Manufacturing
    $50.92
    Sold Out
    V-Twin Manufacturing JIMS TC88 Cam Bearing Puller
    V-Twin Manufacturing
    $280.14
    Quick view
    V-Twin Manufacturing JIMS TC88 Cam Bearing Remover
    V-Twin Manufacturing
    $218.64
    Quick view
    V-Twin Manufacturing JIMS TC88 Wrist Pin Remover
    V-Twin Manufacturing
    $169.14
    Quick view
    V-Twin Manufacturing JIMS TC88 Crankshft R.Browng Tool
    V-Twin Manufacturing
    $235.14
    Quick view
    V-Twin Manufacturing JIMS Compression Release Valve
    V-Twin Manufacturing
    $134.26
    Quick view
    V-Twin Manufacturing JIMS Compression Release Tool
    V-Twin Manufacturing
    $463.16
    Quick view
    V-Twin Manufacturing JIMS TC88 Balance Shft Ret Pins
    V-Twin Manufacturing
    $38.27
    Sold Out
    V-Twin Manufacturing JIMS TC88 Connecting Rod Bushing Tool
    V-Twin Manufacturing
    $166.14
    Quick view
    V-Twin Manufacturing TC88 Cam Chain Unloader Tool
    V-Twin Manufacturing
    $76.25
    Quick view
    V-Twin Manufacturing JIMS TC88 Camshft Rmvr-N.S.tlr
    V-Twin Manufacturing
    $239.50
    Quick view
    V-Twin Manufacturing JIMS TC88 Bshn Rmvr-N.S.tlr
    V-Twin Manufacturing
    $167.04
    Quick view
    V-Twin Manufacturing JIMS TC88 Cam Lockng Wedge Tool
    V-Twin Manufacturing
    $81.75
    Quick view
    V-Twin Manufacturing Shoulderless Valve Guide Remover Tool on all TC 2005-up that use 7mm valve
    V-Twin Manufacturing
    $87.15
    V-Twin Manufacturing JIMS Outer Balancer Bearing Installer & Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS Outer Balancer Bearing Installer &

    VT-16-1376

    $217.04

    In Stock

    Save $-217.04
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS Outer Balancer Bearing Installer & - Sold Each
    Outer Balancer Bearing Installer & Remover Tool removes and installs the outboard balancer bearing on the new 96 & 110 B Softail engines chain guide support plate.
    V-Twin Manufacturing JIMS Starter Ring Gear Rivet Fixture Kit Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS Starter Ring Gear Rivet Fixture Kit

    VT-16-1368

    $499.91

    In Stock

    Save $-499.91
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS Starter Ring Gear Rivet Fixture Kit - Kit
    Starter Ring Gear Rivet Fixture Tool removes the starter ring gear rivets from Big Twin Clutch shells. For 2006-07 BT except Dyna.
    V-Twin Manufacturing JIMS Main Drive Gear Installer Kit Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS Main Drive Gear Installer Kit

    VT-16-1363

    $140.59

    In Stock

    Save $-140.59
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS Main Drive Gear Installer Kit - Kit
    Main Drive Gear Seal Installer allows installation of main drive gear oil seal on assembled transmission to proper depth. The protective sleeve included is used for protecting Inner bearings of main d
    V-Twin Manufacturing JIMS Gasket Locator Tool (3PC Set) Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS Gasket Locator Tool (3PC Set)

    VT-16-1362

    $51.08

    In Stock

    Save $-51.08
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS Gasket Locator Tool (3PC Set) - Set
    Gasket Locator Tool (3 Pc Set) will align Primary, cam & transmission end Cover gaskets, to prevent misalignment & oil leaks.
    V-Twin Manufacturing JIMS TC88 Cylinder Torque Plate Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Cylinder Torque Plate

    VT-16-1287

    $568.04

    In Stock

    Save $-568.04
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Cylinder Torque Plate - Sold Each
    Jims TC-88 Cylinder Torque Plates lasered with correct torquing sequence and will also work on Screamin' Eagle Big Bore Cylinders.
    V-Twin Manufacturing JIMS TC88 Crank Shft Guide Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Crank Shft Guide

    VT-16-1281

    $50.92

    In Stock

    Save $-50.92
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Crank Shft Guide - Sold Each
    Jims TC-88 Crankshaft Guide use to spread pinion bearing Rollers while reassembling right side engine case on to flywheel assembly.
    V-Twin Manufacturing JIMS TC88 Cam Bearing Remover Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Cam Bearing Remover

    VT-16-1279

    $218.64

    In Stock

    Save $-218.64
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Cam Bearing Remover - Sold Each
    Jims TC-88 Inner Cam Bearing Remover replaces Inner bearing easily without damage to crankcase and also prevents Rollers from falling into crankcase. Use on TC-88.
    V-Twin Manufacturing JIMS TC88 Wrist Pin Remover Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Wrist Pin Remover

    VT-16-1276

    $169.14

    In Stock

    Save $-169.14
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Wrist Pin Remover - Sold Each
    Jims TC-88 Wrist Pin Remover allows easy removal of wrist pins on all TC-88.
    V-Twin Manufacturing JIMS TC88 Crankshft R.Browng Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Crankshft R.Browng Tool

    VT-16-1275

    $235.14

    In Stock

    Save $-235.14
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Crankshft R.Browng Tool - Sold Each
    Jims TC-88 Camshaft Bearing Tool designed to remove and replace the right crankcase bearing in and out with no damage to crankcase.
    V-Twin Manufacturing JIMS Compression Release Valve Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS Compression Release Valve

    VT-16-1171

    $134.26

    In Stock

    Save $-134.26
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS Compression Release Valve - Set
    Jims Compression Release Valve This valve is used with Jim's compression release valve Tool . Release valve will make starting your engine effortless. Drill and tap each cyliner head and thread in the self-sealing release valves. Sold as a
    V-Twin Manufacturing JIMS Compression Release Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS Compression Release Tool

    VT-16-1169

    $463.16

    In Stock

    Save $-463.16
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS Compression Release Tool - Sold Each
    Jims Compression Release Valve Tool Use this tool for machining all Twin Cam heads for compression releases. Installs easily on front or rear head, with or without valves installed. Order the threaded tap tool and compression releases sepa
    V-Twin Manufacturing JIMS TC88 Balance Shft Ret Pins Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Balance Shft Ret Pins

    VT-16-1163

    $38.27

    In Stock

    Save $-38.27
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Balance Shft Ret Pins - Sold Each
    Balancer Shaft Retention Pin use this Tool to secure the engine balancers on TC-88B engines when servicing flywheel assembly. This Tool locks into the balancers Sprocket pin holes to prevent the balancer from turning out of sync w
    V-Twin Manufacturing TC88 Cam Chain Unloader Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing TC88 Cam Chain Unloader Tool

    VT-16-0793

    $76.25

    In Stock

    Save $-76.25
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing TC88 Cam Chain Unloader Tool - Sold Each
    Jims Cam Chain Tensioner Unloader will hold the tension of the Primary cam chain on the TC 88 model engine. Instruction included.
    V-Twin Manufacturing JIMS TC88 Camshft Rmvr-N.S.tlr Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Camshft Rmvr-N.S.tlr

    VT-16-0792

    $239.50

    In Stock

    Save $-239.50
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Camshft Rmvr-N.S.tlr - Sold Each
    Jims Camshaft Remover and Installer Tool allows removal and installation of cams in the TC-88 model engine. Tool is used in conjunction with VT No. 16-0793 cam chain tensioner unloader.
    V-Twin Manufacturing JIMS TC88 Bshn Rmvr-N.S.tlr Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Bshn Rmvr-N.S.tlr

    VT-16-0791

    $167.04

    In Stock

    Save $-167.04
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Bshn Rmvr-N.S.tlr - Sold Each
    Jims Crankshaft Bushing Remover/Installer will facilitate removal and installation of bushing in cam support plate on TC-88 model engines.
    V-Twin Manufacturing JIMS TC88 Cam Lockng Wedge Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing JIMS TC88 Cam Lockng Wedge Tool

    VT-16-0790

    $81.75

    In Stock

    Save $-81.75
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing JIMS TC88 Cam Lockng Wedge Tool - Sold Each
    Jims Camshaft/Cranksh aft Locking Tool will lock the gear teeth on the TC 88 model engine. Instructions included.
    V-Twin Manufacturing Shoulderless Valve Guide Remover Tool on all TC 2005-up that use 7mm valve Garage and Shop V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing Shoulderless Valve Guide Remover Tool on all TC 2005-up that use 7mm valve

    VT-16-0322

    $87.15

    In Stock

    Save $-87.15
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing Shoulderless Valve Guide Remover Tool on all TC 2005-up that use 7mm valve - Sold Each
    Shoulderless Valve Guide Remover Tools. Use to remove shoulderless valve guides including the newest 7mm guides. On the 7mm guides there is no need to remove carbon off the guide because you remove from the spring side of head. Use on